From: Waiman Long <[email protected]>
To: Tejun Heo <[email protected]>, Zefan Li <[email protected]>,
Johannes Weiner <[email protected]>,
Jonathan Corbet <[email protected]>, Shuah Khan <[email protected]>
Cc: [email protected], [email protected],
[email protected], [email protected],
"Andrew Morton" <[email protected]>,
"Roman Gushchin" <[email protected]>, "Phil Auld" <[email protected]>,
"Peter Zijlstra" <[email protected]>,
"Juri Lelli" <[email protected]>,
"Frederic Weisbecker" <[email protected]>,
"Marcelo Tosatti" <[email protected]>,
"Michal Koutný" <[email protected]>,
"Waiman Long" <[email protected]>
Subject: [PATCH v10 3/8] cgroup/cpuset: Allow no-task partition to have empty cpuset.cpus.effective
Date: Tue, 3 May 2022 12:21:44 -0400 [thread overview]
Message-ID: <[email protected]> (raw)
In-Reply-To: <[email protected]>
Currently, a partition root cannot have empty "cpuset.cpus.effective".
As a result, a parent partition root cannot distribute out all its CPUs
to child partitions with no CPUs left. However in most cases, there
shouldn't be any tasks associated with intermediate nodes of the default
hierarchy. So the current rule is too restrictive and can waste valuable
CPU resource.
To address this issue, we are now allowing a partition to have empty
"cpuset.cpus.effective" as long as it has no task. Therefore, a parent
partition with no task can now have all its CPUs distributed out to its
child partitions. The top cpuset always have some house-keeping tasks
running and so its list of effective cpu can't never be empty.
Once a partition with empty "cpuset.cpus.effective" is formed, no
new task can be moved into it until "cpuset.cpus.effective" becomes
non-empty.
Signed-off-by: Waiman Long <[email protected]>
---
kernel/cgroup/cpuset.c | 111 +++++++++++++++++++++++++++++++----------
1 file changed, 84 insertions(+), 27 deletions(-)
diff --git a/kernel/cgroup/cpuset.c b/kernel/cgroup/cpuset.c
index d156a39d7a08..7d9abd50a1b9 100644
--- a/kernel/cgroup/cpuset.c
+++ b/kernel/cgroup/cpuset.c
@@ -412,6 +412,41 @@ static inline bool is_in_v2_mode(void)
(cpuset_cgrp_subsys.root->flags & CGRP_ROOT_CPUSET_V2_MODE);
}
+/**
+ * partition_is_populated - check if partition has tasks
+ * @cs: partition root to be checked
+ * @excluded_child: a child cpuset to be excluded in task checking
+ * Return: true if there are tasks, false otherwise
+ *
+ * It is assumed that @cs is a valid partition root. @excluded_child should
+ * be non-NULL when this cpuset is going to become a partition itself.
+ */
+static inline bool partition_is_populated(struct cpuset *cs,
+ struct cpuset *excluded_child)
+{
+ struct cgroup_subsys_state *css;
+ struct cpuset *child;
+
+ if (cs->css.cgroup->nr_populated_csets)
+ return true;
+ if (!excluded_child && !cs->nr_subparts_cpus)
+ return cgroup_is_populated(cs->css.cgroup);
+
+ rcu_read_lock();
+ cpuset_for_each_child(child, css, cs) {
+ if (child == excluded_child)
+ continue;
+ if (is_partition_valid(child))
+ continue;
+ if (cgroup_is_populated(child->css.cgroup)) {
+ rcu_read_unlock();
+ return true;
+ }
+ }
+ rcu_read_unlock();
+ return false;
+}
+
/*
* Return in pmask the portion of a task's cpusets's cpus_allowed that
* are online and are capable of running the task. If none are found,
@@ -1252,22 +1287,25 @@ static int update_parent_subparts_cpumask(struct cpuset *cs, int cmd,
if ((cmd != partcmd_update) && css_has_online_children(&cs->css))
return -EBUSY;
- /*
- * Enabling partition root is not allowed if not all the CPUs
- * can be granted from parent's effective_cpus or at least one
- * CPU will be left after that.
- */
- if ((cmd == partcmd_enable) &&
- (!cpumask_subset(cs->cpus_allowed, parent->effective_cpus) ||
- cpumask_equal(cs->cpus_allowed, parent->effective_cpus)))
- return -EINVAL;
-
- /*
- * A cpumask update cannot make parent's effective_cpus become empty.
- */
adding = deleting = false;
old_prs = new_prs = cs->partition_root_state;
if (cmd == partcmd_enable) {
+ /*
+ * Enabling partition root is not allowed if not all the CPUs
+ * can be granted from parent's effective_cpus.
+ */
+ if (!cpumask_subset(cs->cpus_allowed, parent->effective_cpus))
+ return -EINVAL;
+
+ /*
+ * A parent can be left with no CPU as long as there is no
+ * task directly associated with the parent partition. For
+ * such a parent, no new task can be moved into it.
+ */
+ if (partition_is_populated(parent, cs) &&
+ cpumask_equal(cs->cpus_allowed, parent->effective_cpus))
+ return -EINVAL;
+
cpumask_copy(tmp->addmask, cs->cpus_allowed);
adding = true;
} else if (cmd == partcmd_disable) {
@@ -1289,9 +1327,10 @@ static int update_parent_subparts_cpumask(struct cpuset *cs, int cmd,
adding = cpumask_andnot(tmp->addmask, tmp->addmask,
parent->subparts_cpus);
/*
- * Return error if the new effective_cpus could become empty.
+ * Return error if the new effective_cpus could become empty
+ * and there are tasks in the parent.
*/
- if (adding &&
+ if (adding && partition_is_populated(parent, cs) &&
cpumask_equal(parent->effective_cpus, tmp->addmask)) {
if (!deleting)
return -EINVAL;
@@ -1317,8 +1356,8 @@ static int update_parent_subparts_cpumask(struct cpuset *cs, int cmd,
*/
adding = cpumask_and(tmp->addmask, cs->cpus_allowed,
parent->effective_cpus);
- part_error = cpumask_equal(tmp->addmask,
- parent->effective_cpus);
+ part_error = cpumask_equal(tmp->addmask, parent->effective_cpus) &&
+ partition_is_populated(parent, cs);
}
if (cmd == partcmd_update) {
@@ -1420,9 +1459,15 @@ static void update_cpumasks_hier(struct cpuset *cs, struct tmpmasks *tmp)
/*
* If it becomes empty, inherit the effective mask of the
- * parent, which is guaranteed to have some CPUs.
+ * parent, which is guaranteed to have some CPUs unless
+ * it is a partition root that has explicitly distributed
+ * out all its CPUs.
*/
if (is_in_v2_mode() && cpumask_empty(tmp->new_cpus)) {
+ if (is_partition_valid(cp) &&
+ cpumask_equal(cp->cpus_allowed, cp->subparts_cpus))
+ goto update_parent_subparts;
+
cpumask_copy(tmp->new_cpus, parent->effective_cpus);
if (!cp->use_parent_ecpus) {
cp->use_parent_ecpus = true;
@@ -1444,6 +1489,7 @@ static void update_cpumasks_hier(struct cpuset *cs, struct tmpmasks *tmp)
continue;
}
+update_parent_subparts:
/*
* update_parent_subparts_cpumask() should have been called
* for cs already in update_cpumask(). We should also call
@@ -2249,6 +2295,13 @@ static int cpuset_can_attach(struct cgroup_taskset *tset)
(cpumask_empty(cs->cpus_allowed) || nodes_empty(cs->mems_allowed)))
goto out_unlock;
+ /*
+ * On default hierarchy, task cannot be moved to a cpuset with empty
+ * effective cpus.
+ */
+ if (is_in_v2_mode() && cpumask_empty(cs->effective_cpus))
+ goto out_unlock;
+
cgroup_taskset_for_each(task, css, tset) {
ret = task_can_attach(task, cs->cpus_allowed);
if (ret)
@@ -3115,7 +3168,8 @@ hotplug_update_tasks(struct cpuset *cs,
struct cpumask *new_cpus, nodemask_t *new_mems,
bool cpus_updated, bool mems_updated)
{
- if (cpumask_empty(new_cpus))
+ /* A partition root is allowed to have empty effective cpus */
+ if (cpumask_empty(new_cpus) && !is_partition_valid(cs))
cpumask_copy(new_cpus, parent_cs(cs)->effective_cpus);
if (nodes_empty(*new_mems))
*new_mems = parent_cs(cs)->effective_mems;
@@ -3184,10 +3238,11 @@ static void cpuset_hotplug_update_tasks(struct cpuset *cs, struct tmpmasks *tmp)
/*
* In the unlikely event that a partition root has empty
- * effective_cpus or its parent becomes invalid, we have to
- * transition it to the invalid state.
+ * effective_cpus with tasks or its parent becomes invalid, we
+ * have to transition it to the invalid state.
*/
- if (is_partition_valid(cs) && (cpumask_empty(&new_cpus) ||
+ if (is_partition_valid(cs) &&
+ ((cpumask_empty(&new_cpus) && partition_is_populated(cs, NULL)) ||
is_partition_invalid(parent))) {
if (cs->nr_subparts_cpus) {
spin_lock_irq(&callback_lock);
@@ -3198,13 +3253,15 @@ static void cpuset_hotplug_update_tasks(struct cpuset *cs, struct tmpmasks *tmp)
}
/*
- * If the effective_cpus is empty because the child
- * partitions take away all the CPUs, we can keep
- * the current partition and let the child partitions
- * fight for available CPUs.
+ * Force the partition to become invalid if either one of
+ * the following conditions hold:
+ * 1) empty effective cpus but not valid empty partition.
+ * 2) parent is invalid or doesn't grant any cpus to child
+ * partitions.
*/
if (is_partition_invalid(parent) ||
- cpumask_empty(&new_cpus)) {
+ (cpumask_empty(&new_cpus) &&
+ partition_is_populated(cs, NULL))) {
int old_prs;
update_parent_subparts_cpumask(cs, partcmd_disable,
--
2.27.0
next prev parent reply other threads:[~2022-05-03 16:23 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-03 16:21 [PATCH v10 0/8] cgroup/cpuset: Major cpu partition code restructuring Waiman Long
2022-05-03 16:21 ` [PATCH v10 1/8] cgroup/cpuset: Add top_cpuset check in update_tasks_cpumask() Waiman Long
2022-05-03 16:21 ` [PATCH v10 2/8] cgroup/cpuset: Miscellaneous cleanups & add helper functions Waiman Long
2022-05-03 16:21 ` Waiman Long [this message]
2022-05-03 16:21 ` [PATCH v10 4/8] cgroup/cpuset: Relax constraints to partition & cpus changes Waiman Long
2022-05-03 16:21 ` [PATCH v10 5/8] cgroup/cpuset: Add a new isolated cpus.partition type Waiman Long
2022-05-03 16:21 ` [PATCH v10 6/8] cgroup/cpuset: Show invalid partition reason string Waiman Long
2022-05-03 16:21 ` [PATCH v10 7/8] cgroup/cpuset: Update description of cpuset.cpus.partition in cgroup-v2.rst Waiman Long
2022-05-03 16:21 ` [PATCH v10 8/8] kselftest/cgroup: Add cpuset v2 partition root state test Waiman Long
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox