public inbox for [email protected]
 help / color / mirror / Atom feed
From: Stefan Roesch <[email protected]>
To: <[email protected]>, <[email protected]>,
	<[email protected]>, <[email protected]>,
	<[email protected]>
Cc: <[email protected]>, <[email protected]>, <[email protected]>
Subject: [RFC PATCH v2 00/16] io-uring/xfs: support async buffered writes
Date: Mon, 16 May 2022 09:47:02 -0700	[thread overview]
Message-ID: <[email protected]> (raw)

This patch series adds support for async buffered writes when using both
xfs and io-uring. Currently io-uring only supports buffered writes in the
slow path, by processing them in the io workers. With this patch series it is
now possible to support buffered writes in the fast path. To be able to use
the fast path the required pages must be in the page cache, the required locks
in xfs can be granted immediately and no additional blocks need to be read
form disk.

Updating the inode can take time. An optimization has been implemented for
the time update. Time updates will be processed in the slow path. While there
is already a time update in process, other write requests for the same file,
can skip the update of the modification time.
  

Performance results:
  For fio the following results have been obtained with a queue depth of
  1 and 4k block size (runtime 600 secs):

                 sequential writes:
                 without patch           with patch      libaio     psync
  iops:              77k                    209k          195K       233K
  bw:               314MB/s                 854MB/s       790MB/s    953MB/s
  clat:            9600ns                   120ns         540ns     3000ns


For an io depth of 1, the new patch improves throughput by over three times
(compared to the exiting behavior, where buffered writes are processed by an
io-worker process) and also the latency is considerably reduced. To achieve the
same or better performance with the exisiting code an io depth of 4 is required.
Increasing the iodepth further does not lead to improvements.

In addition the latency of buffered write operations is reduced considerably.



Support for async buffered writes:

  To support async buffered writes the flag FMODE_BUF_WASYNC is introduced. In
  addition the check in generic_write_checks is modified to allow for async
  buffered writes that have this flag set.

  Changes to the iomap page create function to allow the caller to specify
  the gfp flags. Sets the IOMAP_NOWAIT flag in iomap if IOCB_NOWAIT has been set
  and specifies the requested gfp flags.

  Adds the iomap async buffered write support to the xfs iomap layer.
  Adds async buffered write support to the xfs iomap layer.

Support for async buffered write support and inode time modification

  Splits the functions for checking if the file privileges need to be removed in
  two functions: check function and a function for the removal of file privileges.
  The same split is also done for the function to update the file modification time.

  Implement an optimization that while a file modification time is pending other
  requests for the same file don't need to wait for the file modification update. 
  This avoids that a considerable number of buffered async write requests get
  punted.

  Take the ilock in nowait mode if async buffered writes are enabled and enable
  the async buffered writes optimization in io_uring.

Support for write throttling of async buffered writes:

  Split of a _balance_dirty_pages() function that tells wether to sleep or not.
  The function is called by the async buffered writes in iomap_write_iter() to
  determine if write throttling is required or not. In case write throttling is
  necessary, return -EAGAIN to the caller in io-uring. The request will then be
  handled in io-uring io-worker.
  
  The existing function balance_dirty_pages() will call _balance_dirty_pages().

Enable async buffered write support in xfs
  Patch 18: xfs: enable async buffered write support
    This enables the flag that enables async buffered writes for xfs.


Testing:
  This patch has been tested with xfstests and fio.


Changes:
  V2:
  - Remove atomic allocation
  - Use direct write in xfs_buffered_write_iomap_begin()
  - Use xfs_ilock_for_iomap() in xfs_buffered_write_iomap_begin()
  - Remove no_wait check at the end of xfs_buffered_write_iomap_begin() for
    the COW path.
  - Pass xfs_inode pointer to xfs_ilock_iocb and rename function to
    xfs_lock_xfs_inode
  - Replace exisitng uses of xfs_ilock_iocb with xfs_ilock_xfs_inode
  - Use xfs_ilock_xfs_inode in xfs_file_buffered_write()
  - Callers of xfs_ilock_for_iomap need to initialize lock mode. This is
    required so writes use an exclusive lock
  - Split of _balance_dirty_pages() from balance_dirty_pages() and return
    sleep time
  - Call _balance_dirty_pages() in balance_dirty_pages_ratelimited_flags()
  - Move call to balance_dirty_pages_ratelimited_flags() in iomap_write_iter()
    to the beginning of the loop
    


Stefan Roesch (16):
  block: add check for async buffered writes to generic_write_checks
  iomap: add iomap_page_create_gfp to allocate iomap_pages
  iomap: use iomap_page_create_gfp() in __iomap_write_begin
  iomap: add async buffered write support
  xfs: add iomap async buffered write support
  fs: split off need_remove_file_privs() do_remove_file_privs()
  fs: split off need_file_update_time and do_file_update_time
  fs: add pending file update time flag.
  xfs: enable async write file modification handling.
  xfs: add async buffered write support
  io_uring: add support for async buffered writes
  mm: factor out _balance_dirty_pages() from balance_dirty_pages()
  mm: add balance_dirty_pages_ratelimited_flags() function
  iomap: use balance_dirty_pages_ratelimited_flags in iomap_write_iter
  io_uring: add tracepoint for short writes
  xfs: enable async buffered write support

 fs/inode.c                      | 146 +++++++---
 fs/io_uring.c                   |  32 +-
 fs/iomap/buffered-io.c          |  67 ++++-
 fs/read_write.c                 |   3 +-
 fs/xfs/xfs_file.c               |  36 ++-
 fs/xfs/xfs_iomap.c              |  14 +-
 include/linux/fs.h              |   7 +
 include/linux/writeback.h       |   1 +
 include/trace/events/io_uring.h |  25 ++
 mm/page-writeback.c             | 500 +++++++++++++++++---------------
 10 files changed, 520 insertions(+), 311 deletions(-)


base-commit: 0cdd776ec92c0fec768c7079331804d3e52d4b27
-- 
2.30.2



             reply	other threads:[~2022-05-16 16:48 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-16 16:47 Stefan Roesch [this message]
2022-05-16 16:47 ` [RFC PATCH v2 01/16] block: add check for async buffered writes to generic_write_checks Stefan Roesch
2022-05-16 23:43   ` Matthew Wilcox
2022-05-16 16:47 ` [RFC PATCH v2 02/16] iomap: add iomap_page_create_gfp to allocate iomap_pages Stefan Roesch
2022-05-16 16:47 ` [RFC PATCH v2 03/16] iomap: use iomap_page_create_gfp() in __iomap_write_begin Stefan Roesch
2022-05-16 23:58   ` Matthew Wilcox
2022-05-16 16:47 ` [RFC PATCH v2 04/16] iomap: add async buffered write support Stefan Roesch
2022-05-17 11:14   ` Jan Kara
2022-05-16 16:47 ` [RFC PATCH v2 05/16] xfs: add iomap " Stefan Roesch
2022-05-16 16:47 ` [RFC PATCH v2 06/16] fs: split off need_remove_file_privs() do_remove_file_privs() Stefan Roesch
2022-05-16 16:47 ` [RFC PATCH v2 07/16] fs: split off need_file_update_time and do_file_update_time Stefan Roesch
2022-05-17 11:20   ` Jan Kara
2022-05-16 16:47 ` [RFC PATCH v2 08/16] fs: add pending file update time flag Stefan Roesch
2022-05-17 11:28   ` Jan Kara
2022-05-16 16:47 ` [RFC PATCH v2 09/16] xfs: enable async write file modification handling Stefan Roesch
2022-05-16 16:47 ` [RFC PATCH v2 10/16] xfs: add async buffered write support Stefan Roesch
2022-05-16 16:47 ` [RFC PATCH v2 11/16] io_uring: add support for async buffered writes Stefan Roesch
2022-05-16 16:47 ` [RFC PATCH v2 12/16] mm: factor out _balance_dirty_pages() from balance_dirty_pages() Stefan Roesch
2022-05-16 16:47 ` [RFC PATCH v2 13/16] mm: add balance_dirty_pages_ratelimited_flags() function Stefan Roesch
2022-05-16 16:47 ` [RFC PATCH v2 14/16] iomap: use balance_dirty_pages_ratelimited_flags in iomap_write_iter Stefan Roesch
2022-05-16 16:47 ` [RFC PATCH v2 15/16] io_uring: add tracepoint for short writes Stefan Roesch
2022-05-16 16:47 ` [RFC PATCH v2 16/16] xfs: enable async buffered write support Stefan Roesch

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    [email protected] \
    [email protected] \
    [email protected] \
    [email protected] \
    [email protected] \
    [email protected] \
    [email protected] \
    [email protected] \
    [email protected] \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox