From: Stefan Roesch <[email protected]>
To: <[email protected]>, <[email protected]>,
<[email protected]>, <[email protected]>,
<[email protected]>
Cc: <[email protected]>, <[email protected]>, <[email protected]>
Subject: [RFC PATCH v3 10/18] xfs: Add async buffered write support
Date: Wed, 18 May 2022 16:37:01 -0700 [thread overview]
Message-ID: <[email protected]> (raw)
In-Reply-To: <[email protected]>
This adds the async buffered write support to XFS. For async buffered
write requests, the request will return -EAGAIN if the ilock cannot be
obtained immediately.
This splits off a new helper xfs_ilock_inode from the existing helper
xfs_ilock_iocb so it can be used for this function. The exising helper
cannot be used as it hardcoded the inode to be used.
Signed-off-by: Stefan Roesch <[email protected]>
---
fs/xfs/xfs_file.c | 32 +++++++++++++++-----------------
1 file changed, 15 insertions(+), 17 deletions(-)
diff --git a/fs/xfs/xfs_file.c b/fs/xfs/xfs_file.c
index 793918c83755..ad3175b7d366 100644
--- a/fs/xfs/xfs_file.c
+++ b/fs/xfs/xfs_file.c
@@ -190,14 +190,13 @@ xfs_file_fsync(
return error;
}
-static int
-xfs_ilock_iocb(
- struct kiocb *iocb,
+static inline int
+xfs_ilock_xfs_inode(
+ struct xfs_inode *ip,
+ int flags,
unsigned int lock_mode)
{
- struct xfs_inode *ip = XFS_I(file_inode(iocb->ki_filp));
-
- if (iocb->ki_flags & IOCB_NOWAIT) {
+ if (flags & IOCB_NOWAIT) {
if (!xfs_ilock_nowait(ip, lock_mode))
return -EAGAIN;
} else {
@@ -222,7 +221,7 @@ xfs_file_dio_read(
file_accessed(iocb->ki_filp);
- ret = xfs_ilock_iocb(iocb, XFS_IOLOCK_SHARED);
+ ret = xfs_ilock_xfs_inode(ip, iocb->ki_flags, XFS_IOLOCK_SHARED);
if (ret)
return ret;
ret = iomap_dio_rw(iocb, to, &xfs_read_iomap_ops, NULL, 0, 0);
@@ -244,7 +243,7 @@ xfs_file_dax_read(
if (!iov_iter_count(to))
return 0; /* skip atime */
- ret = xfs_ilock_iocb(iocb, XFS_IOLOCK_SHARED);
+ ret = xfs_ilock_xfs_inode(ip, iocb->ki_flags, XFS_IOLOCK_SHARED);
if (ret)
return ret;
ret = dax_iomap_rw(iocb, to, &xfs_read_iomap_ops);
@@ -264,7 +263,7 @@ xfs_file_buffered_read(
trace_xfs_file_buffered_read(iocb, to);
- ret = xfs_ilock_iocb(iocb, XFS_IOLOCK_SHARED);
+ ret = xfs_ilock_xfs_inode(ip, iocb->ki_flags, XFS_IOLOCK_SHARED);
if (ret)
return ret;
ret = generic_file_read_iter(iocb, to);
@@ -343,7 +342,7 @@ xfs_file_write_checks(
if (*iolock == XFS_IOLOCK_SHARED && !IS_NOSEC(inode)) {
xfs_iunlock(ip, *iolock);
*iolock = XFS_IOLOCK_EXCL;
- error = xfs_ilock_iocb(iocb, *iolock);
+ error = xfs_ilock_xfs_inode(ip, iocb->ki_flags, *iolock);
if (error) {
*iolock = 0;
return error;
@@ -516,7 +515,7 @@ xfs_file_dio_write_aligned(
int iolock = XFS_IOLOCK_SHARED;
ssize_t ret;
- ret = xfs_ilock_iocb(iocb, iolock);
+ ret = xfs_ilock_xfs_inode(ip, iocb->ki_flags, iolock);
if (ret)
return ret;
ret = xfs_file_write_checks(iocb, from, &iolock);
@@ -583,7 +582,7 @@ xfs_file_dio_write_unaligned(
flags = IOMAP_DIO_FORCE_WAIT;
}
- ret = xfs_ilock_iocb(iocb, iolock);
+ ret = xfs_ilock_xfs_inode(ip, iocb->ki_flags, iolock);
if (ret)
return ret;
@@ -659,7 +658,7 @@ xfs_file_dax_write(
ssize_t ret, error = 0;
loff_t pos;
- ret = xfs_ilock_iocb(iocb, iolock);
+ ret = xfs_ilock_xfs_inode(ip, iocb->ki_flags, iolock);
if (ret)
return ret;
ret = xfs_file_write_checks(iocb, from, &iolock);
@@ -702,12 +701,11 @@ xfs_file_buffered_write(
bool cleared_space = false;
int iolock;
- if (iocb->ki_flags & IOCB_NOWAIT)
- return -EOPNOTSUPP;
-
write_retry:
iolock = XFS_IOLOCK_EXCL;
- xfs_ilock(ip, iolock);
+ ret = xfs_ilock_xfs_inode(ip, iocb->ki_flags, iolock);
+ if (ret)
+ return ret;
ret = xfs_file_write_checks(iocb, from, &iolock);
if (ret)
--
2.30.2
next prev parent reply other threads:[~2022-05-18 23:38 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-18 23:36 [RFC PATCH v3 00/18] io-uring/xfs: support async buffered writes Stefan Roesch
2022-05-18 23:36 ` [RFC PATCH v3 01/18] block: Add check for async buffered writes to generic_write_checks Stefan Roesch
2022-05-18 23:36 ` [RFC PATCH v3 02/18] iomap: Add iomap_page_create_gfp to allocate iomap_pages Stefan Roesch
2022-05-19 8:18 ` Christoph Hellwig
2022-05-18 23:36 ` [RFC PATCH v3 03/18] iomap: Use iomap_page_create_gfp() in __iomap_write_begin Stefan Roesch
2022-05-19 8:19 ` Christoph Hellwig
2022-05-18 23:36 ` [RFC PATCH v3 04/18] iomap: Add async buffered write support Stefan Roesch
2022-05-19 8:25 ` Christoph Hellwig
2022-05-20 18:29 ` Stefan Roesch
2022-05-18 23:36 ` [RFC PATCH v3 05/18] xfs: Add iomap " Stefan Roesch
2022-05-18 23:36 ` [RFC PATCH v3 06/18] fs: Split off remove_needs_file_privs() __remove_file_privs() Stefan Roesch
2022-05-18 23:36 ` [RFC PATCH v3 07/18] fs: Split off file_needs_update_time and __file_update_time Stefan Roesch
2022-05-18 23:36 ` [RFC PATCH v3 08/18] xfs: Enable async write file modification handling Stefan Roesch
2022-05-18 23:37 ` [RFC PATCH v3 09/18] fs: Optimization for concurrent file time updates Stefan Roesch
2022-05-18 23:37 ` Stefan Roesch [this message]
2022-05-18 23:37 ` [RFC PATCH v3 11/18] io_uring: Add support for async buffered writes Stefan Roesch
2022-05-18 23:37 ` [RFC PATCH v3 12/18] mm: Move starting of background writeback into the main balancing loop Stefan Roesch
2022-05-18 23:37 ` [RFC PATCH v3 13/18] mm: Move updates of dirty_exceeded into one place Stefan Roesch
2022-05-18 23:37 ` [RFC PATCH v3 14/18] mm: Prepare balance_dirty_pages() for async buffered writes Stefan Roesch
2022-05-18 23:37 ` [RFC PATCH v3 15/18] mm: Add balance_dirty_pages_ratelimited_async() function Stefan Roesch
[not found] ` <YoX/[email protected]>
2022-05-19 8:54 ` Jan Kara
2022-05-18 23:37 ` [RFC PATCH v3 16/18] iomap: Use balance_dirty_pages_ratelimited_flags in iomap_write_iter Stefan Roesch
2022-05-18 23:37 ` [RFC PATCH v3 17/18] io_uring: Add tracepoint for short writes Stefan Roesch
2022-05-18 23:37 ` [RFC PATCH v3 18/18] xfs: Enable async buffered write support Stefan Roesch
2022-05-19 8:32 ` Christoph Hellwig
2022-05-20 18:32 ` Stefan Roesch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox