From: "Paul E. McKenney" <[email protected]>
To: [email protected]
Cc: [email protected], [email protected], [email protected],
Willy Tarreau <[email protected]>,
"Paul E . McKenney" <[email protected]>
Subject: [PATCH nolibc 06/18] selftests/nolibc: implement a few tests for various syscalls
Date: Wed, 31 Aug 2022 11:21:36 -0700 [thread overview]
Message-ID: <[email protected]> (raw)
In-Reply-To: <20220831182113.GA2697286@paulmck-ThinkPad-P17-Gen-1>
From: Willy Tarreau <[email protected]>
This adds 63 tests covering about 34 syscalls. Both successes and
failures are tested. Two tests fail when run as unprivileged user
(link_dir which returns EACCESS instead of EPERM, and chroot which
returns EPERM). One test (execve("/")) expects to fail on EACCESS,
but needs to have valid arguments otherwise the kernel will log a
message. And a few tests require /proc to be mounted.
The code is not pretty since all tests are one-liners, sometimes
resulting in long lines, especially when using compount statements to
preset a line, but it's convenient and doesn't obfuscate the code,
which is important to understand what failed.
Signed-off-by: Willy Tarreau <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
---
tools/testing/selftests/nolibc/nolibc-test.c | 110 +++++++++++++++++++
1 file changed, 110 insertions(+)
diff --git a/tools/testing/selftests/nolibc/nolibc-test.c b/tools/testing/selftests/nolibc/nolibc-test.c
index 49177ea9943cc..dc87832912ce4 100644
--- a/tools/testing/selftests/nolibc/nolibc-test.c
+++ b/tools/testing/selftests/nolibc/nolibc-test.c
@@ -388,9 +388,119 @@ static int expect_strne(const char *expr, int llen, const char *cmp)
case __LINE__: llen += printf("%d %s", test, #name);
+/* used by some syscall tests below */
+int test_getdents64(const char *dir)
+{
+ char buffer[4096];
+ int fd, ret;
+ int err;
+
+ ret = fd = open(dir, O_RDONLY | O_DIRECTORY, 0);
+ if (ret < 0)
+ return ret;
+
+ ret = getdents64(fd, (void *)buffer, sizeof(buffer));
+ err = errno;
+ close(fd);
+
+ errno = err;
+ return ret;
+}
+
+/* Run syscall tests between IDs <min> and <max>.
+ * Return 0 on success, non-zero on failure.
+ */
+int run_syscall(int min, int max)
+{
+ struct stat stat_buf;
+ int test;
+ int tmp;
+ int ret = 0;
+ void *p1, *p2;
+
+ for (test = min; test >= 0 && test <= max; test++) {
+ int llen = 0; // line length
+
+ /* avoid leaving empty lines below, this will insert holes into
+ * test numbers.
+ */
+ switch (test + __LINE__ + 1) {
+ CASE_TEST(getpid); EXPECT_SYSNE(1, getpid(), -1); break;
+ CASE_TEST(getppid); EXPECT_SYSNE(1, getppid(), -1); break;
+ CASE_TEST(gettid); EXPECT_SYSNE(1, gettid(), -1); break;
+ CASE_TEST(getpgid_self); EXPECT_SYSNE(1, getpgid(0), -1); break;
+ CASE_TEST(getpgid_bad); EXPECT_SYSER(1, getpgid(-1), -1, ESRCH); break;
+ CASE_TEST(kill_0); EXPECT_SYSZR(1, kill(getpid(), 0)); break;
+ CASE_TEST(kill_CONT); EXPECT_SYSZR(1, kill(getpid(), 0)); break;
+ CASE_TEST(kill_BADPID); EXPECT_SYSER(1, kill(INT_MAX, 0), -1, ESRCH); break;
+ CASE_TEST(sbrk); if ((p1 = p2 = sbrk(4096)) != (void *)-1) p2 = sbrk(-4096); EXPECT_SYSZR(1, (p2 == (void *)-1) || p2 == p1); break;
+ CASE_TEST(brk); EXPECT_SYSZR(1, brk(sbrk(0))); break;
+ CASE_TEST(chdir_root); EXPECT_SYSZR(1, chdir("/")); break;
+ CASE_TEST(chdir_dot); EXPECT_SYSZR(1, chdir(".")); break;
+ CASE_TEST(chdir_blah); EXPECT_SYSER(1, chdir("/blah"), -1, ENOENT); break;
+ CASE_TEST(chmod_net); EXPECT_SYSZR(1, chmod("/proc/self/net", 0555)); break;
+ CASE_TEST(chmod_self); EXPECT_SYSER(1, chmod("/proc/self", 0555), -1, EPERM); break;
+ CASE_TEST(chown_self); EXPECT_SYSER(1, chown("/proc/self", 0, 0), -1, EPERM); break;
+ CASE_TEST(chroot_root); EXPECT_SYSZR(1, chroot("/")); break;
+ CASE_TEST(chroot_blah); EXPECT_SYSER(1, chroot("/proc/self/blah"), -1, ENOENT); break;
+ CASE_TEST(chroot_exe); EXPECT_SYSER(1, chroot("/proc/self/exe"), -1, ENOTDIR); break;
+ CASE_TEST(close_m1); EXPECT_SYSER(1, close(-1), -1, EBADF); break;
+ CASE_TEST(close_dup); EXPECT_SYSZR(1, close(dup(0))); break;
+ CASE_TEST(dup_0); tmp = dup(0); EXPECT_SYSNE(1, tmp, -1); close(tmp); break;
+ CASE_TEST(dup_m1); tmp = dup(-1); EXPECT_SYSER(1, tmp, -1, EBADF); if (tmp != -1) close(tmp); break;
+ CASE_TEST(dup2_0); tmp = dup2(0, 100); EXPECT_SYSNE(1, tmp, -1); close(tmp); break;
+ CASE_TEST(dup2_m1); tmp = dup2(-1, 100); EXPECT_SYSER(1, tmp, -1, EBADF); if (tmp != -1) close(tmp); break;
+ CASE_TEST(dup3_0); tmp = dup3(0, 100, 0); EXPECT_SYSNE(1, tmp, -1); close(tmp); break;
+ CASE_TEST(dup3_m1); tmp = dup3(-1, 100, 0); EXPECT_SYSER(1, tmp, -1, EBADF); if (tmp != -1) close(tmp); break;
+ CASE_TEST(execve_root); EXPECT_SYSER(1, execve("/", (char*[]){ [0] = "/", [1] = NULL }, NULL), -1, EACCES); break;
+ CASE_TEST(getdents64_root); EXPECT_SYSNE(1, test_getdents64("/"), -1); break;
+ CASE_TEST(getdents64_null); EXPECT_SYSER(1, test_getdents64("/dev/null"), -1, ENOTDIR); break;
+ CASE_TEST(gettimeofday_null); EXPECT_SYSZR(1, gettimeofday(NULL, NULL)); break;
+ CASE_TEST(gettimeofday_bad1); EXPECT_SYSER(1, gettimeofday((void *)1, NULL), -1, EFAULT); break;
+ CASE_TEST(gettimeofday_bad2); EXPECT_SYSER(1, gettimeofday(NULL, (void *)1), -1, EFAULT); break;
+ CASE_TEST(gettimeofday_bad2); EXPECT_SYSER(1, gettimeofday(NULL, (void *)1), -1, EFAULT); break;
+ CASE_TEST(ioctl_tiocinq); EXPECT_SYSZR(1, ioctl(0, TIOCINQ, &tmp)); break;
+ CASE_TEST(ioctl_tiocinq); EXPECT_SYSZR(1, ioctl(0, TIOCINQ, &tmp)); break;
+ CASE_TEST(link_root1); EXPECT_SYSER(1, link("/", "/"), -1, EEXIST); break;
+ CASE_TEST(link_blah); EXPECT_SYSER(1, link("/proc/self/blah", "/blah"), -1, ENOENT); break;
+ CASE_TEST(link_dir); EXPECT_SYSER(1, link("/", "/blah"), -1, EPERM); break;
+ CASE_TEST(link_cross); EXPECT_SYSER(1, link("/proc/self/net", "/blah"), -1, EXDEV); break;
+ CASE_TEST(lseek_m1); EXPECT_SYSER(1, lseek(-1, 0, SEEK_SET), -1, EBADF); break;
+ CASE_TEST(lseek_0); EXPECT_SYSER(1, lseek(0, 0, SEEK_SET), -1, ESPIPE); break;
+ CASE_TEST(mkdir_root); EXPECT_SYSER(1, mkdir("/", 0755), -1, EEXIST); break;
+ CASE_TEST(open_tty); EXPECT_SYSNE(1, tmp = open("/dev/null", 0), -1); if (tmp != -1) close(tmp); break;
+ CASE_TEST(open_blah); EXPECT_SYSER(1, tmp = open("/proc/self/blah", 0), -1, ENOENT); if (tmp != -1) close(tmp); break;
+ CASE_TEST(poll_null); EXPECT_SYSZR(1, poll(NULL, 0, 0)); break;
+ CASE_TEST(poll_stdout); EXPECT_SYSNE(1, ({ struct pollfd fds = { 1, POLLOUT, 0}; poll(&fds, 1, 0); }), -1); break;
+ CASE_TEST(poll_fault); EXPECT_SYSER(1, poll((void *)1, 1, 0), -1, EFAULT); break;
+ CASE_TEST(read_badf); EXPECT_SYSER(1, read(-1, &tmp, 1), -1, EBADF); break;
+ CASE_TEST(sched_yield); EXPECT_SYSZR(1, sched_yield()); break;
+ CASE_TEST(select_null); EXPECT_SYSZR(1, ({ struct timeval tv = { 0 }; select(0, NULL, NULL, NULL, &tv); })); break;
+ CASE_TEST(select_stdout); EXPECT_SYSNE(1, ({ fd_set fds; FD_ZERO(&fds); FD_SET(1, &fds); select(2, NULL, &fds, NULL, NULL); }), -1); break;
+ CASE_TEST(select_fault); EXPECT_SYSER(1, select(1, (void *)1, NULL, NULL, 0), -1, EFAULT); break;
+ CASE_TEST(stat_blah); EXPECT_SYSER(1, stat("/proc/self/blah", &stat_buf), -1, ENOENT); break;
+ CASE_TEST(stat_fault); EXPECT_SYSER(1, stat(NULL, &stat_buf), -1, EFAULT); break;
+ CASE_TEST(symlink_root); EXPECT_SYSER(1, symlink("/", "/"), -1, EEXIST); break;
+ CASE_TEST(unlink_root); EXPECT_SYSER(1, unlink("/"), -1, EISDIR); break;
+ CASE_TEST(unlink_blah); EXPECT_SYSER(1, unlink("/proc/self/blah"), -1, ENOENT); break;
+ CASE_TEST(wait_child); EXPECT_SYSER(1, wait(&tmp), -1, ECHILD); break;
+ CASE_TEST(waitpid_min); EXPECT_SYSER(1, waitpid(INT_MIN, &tmp, WNOHANG), -1, ESRCH); break;
+ CASE_TEST(waitpid_child); EXPECT_SYSER(1, waitpid(getpid(), &tmp, WNOHANG), -1, ECHILD); break;
+ CASE_TEST(write_badf); EXPECT_SYSER(1, write(-1, &tmp, 1), -1, EBADF); break;
+ CASE_TEST(write_zero); EXPECT_SYSZR(1, write(1, &tmp, 0)); break;
+ case __LINE__:
+ return ret; /* must be last */
+ /* note: do not set any defaults so as to permit holes above */
+ }
+ }
+ return ret;
+}
+
+
/* This is the definition of known test names, with their functions */
static struct test test_names[] = {
/* add new tests here */
+ { .name = "syscall", .func = run_syscall },
{ 0 }
};
--
2.31.1.189.g2e36527f23
next prev parent reply other threads:[~2022-08-31 18:21 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-31 18:21 [PATCH nolibc 0/18] nolibc updates for v6.1 Paul E. McKenney
2022-08-31 18:21 ` [PATCH nolibc 01/18] tools/nolibc: make argc 32-bit in riscv startup code Paul E. McKenney
2022-08-31 18:21 ` [PATCH rcu 1/2] torture: Optionally flush printk() buffers before powering off Paul E. McKenney
2022-09-01 9:12 ` John Ogness
2022-09-01 10:17 ` Paul E. McKenney
2022-08-31 18:21 ` [PATCH rcu 2/2] rcutorture: Use the barrier operation specified by cur_ops Paul E. McKenney
2022-08-31 18:21 ` [PATCH nolibc 02/18] tools/nolibc: fix build warning in sys_mmap() when my_syscall6 is not defined Paul E. McKenney
2022-08-31 18:21 ` [PATCH nolibc 03/18] tools/nolibc: make sys_mmap() automatically use the right __NR_mmap definition Paul E. McKenney
2022-08-31 18:21 ` [PATCH nolibc 04/18] selftests/nolibc: add basic infrastructure to ease creation of nolibc tests Paul E. McKenney
2022-08-31 18:21 ` [PATCH nolibc 05/18] selftests/nolibc: support a test definition format Paul E. McKenney
2022-08-31 18:21 ` Paul E. McKenney [this message]
2022-08-31 18:21 ` [PATCH nolibc 07/18] selftests/nolibc: add a few tests for some libc functions Paul E. McKenney
2022-08-31 18:21 ` [PATCH nolibc 08/18] selftests/nolibc: exit with poweroff on success when getpid() == 1 Paul E. McKenney
2022-08-31 18:21 ` [PATCH nolibc 09/18] selftests/nolibc: on x86, support exiting with isa-debug-exit Paul E. McKenney
2022-08-31 18:21 ` [PATCH nolibc 10/18] selftests/nolibc: recreate and populate /dev and /proc if missing Paul E. McKenney
2022-08-31 18:21 ` [PATCH nolibc 11/18] selftests/nolibc: condition some tests on /proc existence Paul E. McKenney
2022-08-31 18:21 ` [PATCH nolibc 12/18] selftests/nolibc: support glibc as well Paul E. McKenney
2022-08-31 18:21 ` [PATCH nolibc 13/18] selftests/nolibc: add a "kernel" target to build the kernel with the initramfs Paul E. McKenney
2022-08-31 18:21 ` [PATCH nolibc 14/18] selftests/nolibc: add a "defconfig" target Paul E. McKenney
2022-08-31 18:21 ` [PATCH nolibc 15/18] selftests/nolibc: add a "run" target to start the kernel in QEMU Paul E. McKenney
2022-08-31 18:21 ` [PATCH nolibc 16/18] selftests/nolibc: "sysroot" target installs a local copy of the sysroot Paul E. McKenney
2022-08-31 18:21 ` [PATCH nolibc 17/18] selftests/nolibc: add a "help" target Paul E. McKenney
2022-08-31 18:21 ` [PATCH nolibc 18/18] selftests/nolibc: Avoid generated files being committed Paul E. McKenney
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox