public inbox for gwml@vger.gnuweeb.org
 help / color / mirror / Atom feed
From: Ammar Faizi <ammarfaizi2@gnuweeb.org>
To: Oliver Neukum <oneukum@suse.com>,
	Andrew Lunn <andrew+netdev@lunn.ch>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>,
	Linus Torvalds <torvalds@linux-foundation.org>,
	Paolo Abeni <pabeni@redhat.com>
Cc: Ammar Faizi <ammarfaizi2@gnuweeb.org>,
	Simon Horman <horms@kernel.org>,
	John Ernberg <john.ernberg@actia.se>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Linux Netdev Mailing List <netdev@vger.kernel.org>,
	Linux USB Mailing List <linux-usb@vger.kernel.org>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	Armando Budianto <sprite@gnuweeb.org>,
	gwml@vger.gnuweeb.org, stable@vger.kernel.org
Subject: [PATCH net v3] net: usbnet: Fix the wrong netif_carrier_on() call
Date: Wed,  6 Aug 2025 07:31:05 +0700	[thread overview]
Message-ID: <20250806003105.15172-1-ammarfaizi2@gnuweeb.org> (raw)

The commit referenced in the Fixes tag causes usbnet to malfunction
(identified via git bisect). Post-commit, my external RJ45 LAN cable
fails to connect. Linus also reported the same issue after pulling that
commit.

The code has a logic error: netif_carrier_on() is only called when the
link is already on. Fix this by moving the netif_carrier_on() call
outside the if-statement entirely. This ensures it is always called
when EVENT_LINK_CARRIER_ON is set and properly clears it regardless
of the link state.

Cc: stable@vger.kernel.org
Cc: Armando Budianto <sprite@gnuweeb.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/all/CAHk-=wjqL4uF0MG_c8+xHX1Vv8==sPYQrtzbdA3kzi96284nuQ@mail.gmail.com
Closes: https://lore.kernel.org/netdev/CAHk-=wjKh8X4PT_mU1kD4GQrbjivMfPn-_hXa6han_BTDcXddw@mail.gmail.com
Closes: https://lore.kernel.org/netdev/0752dee6-43d6-4e1f-81d2-4248142cccd2@gnuweeb.org
Fixes: 0d9cfc9b8cb1 ("net: usbnet: Avoid potential RCU stall on LINK_CHANGE event")
Signed-off-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
---

v3:
  - Move the netif_carrier_on() call outside of the if-statement
    entirely (Linus).

v2:
  - Rebase on top of the latest netdev/net tree. The previous patch was
    based on 0d9cfc9b8cb1. Line numbers have changed since then.
  Link: https://lore.gnuweeb.org/gwml/20250801190310.58443-1-ammarfaizi2@gnuweeb.org

 drivers/net/usb/usbnet.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index a38ffbf4b3f0..511c4154cf74 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -1113,32 +1113,32 @@ static const struct ethtool_ops usbnet_ethtool_ops = {
 	.set_link_ksettings	= usbnet_set_link_ksettings_mii,
 };
 
 /*-------------------------------------------------------------------------*/
 
 static void __handle_link_change(struct usbnet *dev)
 {
 	if (!test_bit(EVENT_DEV_OPEN, &dev->flags))
 		return;
 
+	if (test_and_clear_bit(EVENT_LINK_CARRIER_ON, &dev->flags))
+		netif_carrier_on(dev->net);
+
 	if (!netif_carrier_ok(dev->net)) {
 		/* kill URBs for reading packets to save bus bandwidth */
 		unlink_urbs(dev, &dev->rxq);
 
 		/*
 		 * tx_timeout will unlink URBs for sending packets and
 		 * tx queue is stopped by netcore after link becomes off
 		 */
 	} else {
-		if (test_and_clear_bit(EVENT_LINK_CARRIER_ON, &dev->flags))
-			netif_carrier_on(dev->net);
-
 		/* submitting URBs for reading packets */
 		queue_work(system_bh_wq, &dev->bh_work);
 	}
 
 	/* hard_mtu or rx_urb_size may change during link change */
 	usbnet_update_max_qlen(dev);
 
 	clear_bit(EVENT_LINK_CHANGE, &dev->flags);
 }
 
-- 
Ammar Faizi


             reply	other threads:[~2025-08-06  0:31 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-08-06  0:31 Ammar Faizi [this message]
2025-08-06 19:54 ` [PATCH net v3] net: usbnet: Fix the wrong netif_carrier_on() call Simon Horman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250806003105.15172-1-ammarfaizi2@gnuweeb.org \
    --to=ammarfaizi2@gnuweeb.org \
    --cc=andrew+netdev@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=gwml@vger.gnuweeb.org \
    --cc=horms@kernel.org \
    --cc=john.ernberg@actia.se \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=oneukum@suse.com \
    --cc=pabeni@redhat.com \
    --cc=sprite@gnuweeb.org \
    --cc=stable@vger.kernel.org \
    --cc=torvalds@linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox