From: syzbot <[email protected]>
To: [email protected], [email protected],
[email protected], [email protected],
[email protected], [email protected],
[email protected]
Subject: Re: [syzbot] WARNING in io_link_timeout_fn
Date: Thu, 13 May 2021 17:08:07 -0700 [thread overview]
Message-ID: <[email protected]> (raw)
In-Reply-To: <[email protected]>
Hello,
syzbot has tested the proposed patch but the reproducer is still triggering an issue:
KASAN: use-after-free Read in hrtimer_active
==================================================================
BUG: KASAN: use-after-free in hrtimer_active+0x1d6/0x1f0 kernel/time/hrtimer.c:1462
Read of size 8 at addr ffff8880129a64b8 by task syz-executor.0/9928
CPU: 0 PID: 9928 Comm: syz-executor.0 Not tainted 5.12.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x141/0x1d7 lib/dump_stack.c:120
print_address_description.constprop.0.cold+0x5b/0x2f8 mm/kasan/report.c:233
__kasan_report mm/kasan/report.c:419 [inline]
kasan_report.cold+0x7c/0xd8 mm/kasan/report.c:436
hrtimer_active+0x1d6/0x1f0 kernel/time/hrtimer.c:1462
hrtimer_try_to_cancel+0x21/0x1e0 kernel/time/hrtimer.c:1180
io_kill_linked_timeout fs/io_uring.c:1794 [inline]
io_disarm_next+0x196/0xad0 fs/io_uring.c:1827
__io_req_find_next+0xca/0x160 fs/io_uring.c:1852
io_req_find_next fs/io_uring.c:1868 [inline]
io_queue_next fs/io_uring.c:2070 [inline]
io_free_req fs/io_uring.c:2078 [inline]
io_put_req_deferred_cb+0x253/0x4a0 fs/io_uring.c:2180
__tctx_task_work fs/io_uring.c:1909 [inline]
tctx_task_work+0x24e/0x550 fs/io_uring.c:1923
task_work_run+0xdd/0x1a0 kernel/task_work.c:161
tracehook_notify_signal include/linux/tracehook.h:212 [inline]
handle_signal_work kernel/entry/common.c:145 [inline]
exit_to_user_mode_loop kernel/entry/common.c:171 [inline]
exit_to_user_mode_prepare+0x24a/0x280 kernel/entry/common.c:208
__syscall_exit_to_user_mode_work kernel/entry/common.c:290 [inline]
syscall_exit_to_user_mode+0x19/0x60 kernel/entry/common.c:301
do_syscall_64+0x47/0xb0 arch/x86/entry/common.c:57
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x4665f9
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f9092a97188 EFLAGS: 00000246 ORIG_RAX: 00000000000001aa
RAX: 0000000000000100 RBX: 000000000056bf60 RCX: 00000000004665f9
RDX: 0000000000000000 RSI: 000000000000450c RDI: 0000000000000003
RBP: 00000000004bfce1 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 000000000056bf60
R13: 0000000000a9fb1f R14: 00007f9092a97300 R15: 0000000000022000
Allocated by task 9928:
kasan_save_stack+0x1b/0x40 mm/kasan/common.c:38
kasan_set_track mm/kasan/common.c:46 [inline]
set_alloc_info mm/kasan/common.c:427 [inline]
____kasan_kmalloc mm/kasan/common.c:506 [inline]
____kasan_kmalloc mm/kasan/common.c:465 [inline]
__kasan_kmalloc+0x99/0xc0 mm/kasan/common.c:515
kmalloc include/linux/slab.h:561 [inline]
io_alloc_async_data fs/io_uring.c:3116 [inline]
io_timeout_prep+0x3d9/0x500 fs/io_uring.c:5637
io_req_prep fs/io_uring.c:5908 [inline]
io_submit_sqe fs/io_uring.c:6576 [inline]
io_submit_sqes+0x4e4c/0x6c50 fs/io_uring.c:6734
__do_sys_io_uring_enter+0xeaf/0x1d50 fs/io_uring.c:9319
do_syscall_64+0x3a/0xb0 arch/x86/entry/common.c:47
entry_SYSCALL_64_after_hwframe+0x44/0xae
Freed by task 4826:
kasan_save_stack+0x1b/0x40 mm/kasan/common.c:38
kasan_set_track+0x1c/0x30 mm/kasan/common.c:46
kasan_set_free_info+0x20/0x30 mm/kasan/generic.c:357
____kasan_slab_free mm/kasan/common.c:360 [inline]
____kasan_slab_free mm/kasan/common.c:325 [inline]
__kasan_slab_free+0xf5/0x130 mm/kasan/common.c:367
kasan_slab_free include/linux/kasan.h:199 [inline]
slab_free_hook mm/slub.c:1563 [inline]
slab_free_freelist_hook+0x92/0x210 mm/slub.c:1601
slab_free mm/slub.c:3162 [inline]
kfree+0xe5/0x7f0 mm/slub.c:4216
io_dismantle_req+0x116/0x250 fs/io_uring.c:1743
io_req_complete_post+0x1d7/0x890 fs/io_uring.c:1600
io_link_timeout_fn+0x5f7/0xb10 fs/io_uring.c:6369
__run_hrtimer kernel/time/hrtimer.c:1537 [inline]
__hrtimer_run_queues+0x609/0xe40 kernel/time/hrtimer.c:1601
hrtimer_interrupt+0x330/0xa00 kernel/time/hrtimer.c:1663
local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1089 [inline]
__sysvec_apic_timer_interrupt+0x146/0x540 arch/x86/kernel/apic/apic.c:1106
sysvec_apic_timer_interrupt+0x8e/0xc0 arch/x86/kernel/apic/apic.c:1100
asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:632
The buggy address belongs to the object at ffff8880129a6480
which belongs to the cache kmalloc-96 of size 96
The buggy address is located 56 bytes inside of
96-byte region [ffff8880129a6480, ffff8880129a64e0)
The buggy address belongs to the page:
page:ffffea00004a6980 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x129a6
flags: 0xfff00000000200(slab|node=0|zone=1|lastcpupid=0x7ff)
raw: 00fff00000000200 dead000000000100 dead000000000122 ffff888010841780
raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 0, migratetype Unmovable, gfp_mask 0x12cc0(GFP_KERNEL|__GFP_NOWARN|__GFP_NORETRY), pid 9928, ts 107924339577
set_page_owner include/linux/page_owner.h:31 [inline]
post_alloc_hook+0x161/0x1c0 mm/page_alloc.c:2302
prep_new_page mm/page_alloc.c:2311 [inline]
get_page_from_freelist+0x1c6f/0x3fb0 mm/page_alloc.c:3951
__alloc_pages_nodemask+0x2d6/0x730 mm/page_alloc.c:5001
alloc_pages_current+0x18c/0x2a0 mm/mempolicy.c:2277
alloc_pages include/linux/gfp.h:561 [inline]
alloc_slab_page mm/slub.c:1639 [inline]
allocate_slab+0x2c5/0x4c0 mm/slub.c:1779
new_slab mm/slub.c:1842 [inline]
new_slab_objects mm/slub.c:2588 [inline]
___slab_alloc+0x44c/0x7a0 mm/slub.c:2751
__slab_alloc.constprop.0+0xa7/0xf0 mm/slub.c:2791
slab_alloc_node mm/slub.c:2872 [inline]
slab_alloc mm/slub.c:2916 [inline]
__kmalloc+0x2e5/0x300 mm/slub.c:4054
kmalloc include/linux/slab.h:561 [inline]
io_alloc_async_data fs/io_uring.c:3116 [inline]
io_timeout_prep+0x3d9/0x500 fs/io_uring.c:5637
io_req_prep fs/io_uring.c:5908 [inline]
io_submit_sqe fs/io_uring.c:6576 [inline]
io_submit_sqes+0x4e4c/0x6c50 fs/io_uring.c:6734
__do_sys_io_uring_enter+0xeaf/0x1d50 fs/io_uring.c:9319
do_syscall_64+0x3a/0xb0 arch/x86/entry/common.c:47
entry_SYSCALL_64_after_hwframe+0x44/0xae
page last free stack trace:
reset_page_owner include/linux/page_owner.h:24 [inline]
free_pages_prepare mm/page_alloc.c:1271 [inline]
free_pcp_prepare+0x2cb/0x410 mm/page_alloc.c:1310
free_unref_page_prepare mm/page_alloc.c:3205 [inline]
free_unref_page+0x12/0x1d0 mm/page_alloc.c:3253
qlink_free mm/kasan/quarantine.c:146 [inline]
qlist_free_all+0x5a/0xc0 mm/kasan/quarantine.c:165
kasan_quarantine_reduce+0x180/0x200 mm/kasan/quarantine.c:272
__kasan_slab_alloc+0x7f/0x90 mm/kasan/common.c:437
kasan_slab_alloc include/linux/kasan.h:223 [inline]
slab_post_alloc_hook mm/slab.h:516 [inline]
slab_alloc_node mm/slub.c:2908 [inline]
slab_alloc mm/slub.c:2916 [inline]
kmem_cache_alloc+0x153/0x370 mm/slub.c:2921
getname_flags.part.0+0x50/0x4f0 fs/namei.c:138
getname_flags include/linux/audit.h:319 [inline]
getname+0x8e/0xd0 fs/namei.c:209
do_sys_openat2+0xf5/0x420 fs/open.c:1181
do_sys_open fs/open.c:1203 [inline]
__do_sys_open fs/open.c:1211 [inline]
__se_sys_open fs/open.c:1207 [inline]
__x64_sys_open+0x119/0x1c0 fs/open.c:1207
do_syscall_64+0x3a/0xb0 arch/x86/entry/common.c:47
entry_SYSCALL_64_after_hwframe+0x44/0xae
Memory state around the buggy address:
ffff8880129a6380: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
ffff8880129a6400: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc
>ffff8880129a6480: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
^
ffff8880129a6500: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
ffff8880129a6580: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
==================================================================
Tested on:
commit: a519b86e io_uring: syz debug output
git tree: https://github.com/isilence/linux.git syz_test6
console output: https://syzkaller.appspot.com/x/log.txt?x=14127779d00000
kernel config: https://syzkaller.appspot.com/x/.config?x=ae2e6c63d6410fd3
dashboard link: https://syzkaller.appspot.com/bug?extid=5a864149dd970b546223
compiler:
next prev parent reply other threads:[~2021-05-14 0:08 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-12 20:28 [syzbot] WARNING in io_link_timeout_fn syzbot
2021-05-12 20:56 ` Jens Axboe
2021-05-12 22:38 ` syzbot
2021-05-13 21:03 ` Pavel Begunkov
2021-05-14 0:08 ` syzbot [this message]
2021-05-14 0:39 ` Pavel Begunkov
2021-05-14 1:05 ` syzbot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox