From: Jann Horn <[email protected]>
To: Jens Axboe <[email protected]>, [email protected]
Cc: [email protected],
Andrew Morton <[email protected]>,
Michal Hocko <[email protected]>,
[email protected]
Subject: [PATCH] io-wq: fix handling of NUMA node IDs
Date: Tue, 26 Nov 2019 19:10:20 +0100 [thread overview]
Message-ID: <[email protected]> (raw)
There are several things that can go wrong in the current code on NUMA
systems, especially if not all nodes are online all the time:
- If the identifiers of the online nodes do not form a single contiguous
block starting at zero, wq->wqes will be too small, and OOB memory
accesses will occur e.g. in the loop in io_wq_create().
- If a node comes online between the call to num_online_nodes() and the
for_each_node() loop in io_wq_create(), an OOB write will occur.
- If a node comes online between io_wq_create() and io_wq_enqueue(), a
lookup is performed for an element that doesn't exist, and an OOB read
will probably occur.
Fix it by:
- using nr_node_ids instead of num_online_nodes() for the allocation size;
nr_node_ids is calculated by setup_nr_node_ids() to be bigger than the
highest node ID that could possibly come online at some point, even if
those nodes' identifiers are not a contiguous block
- creating workers for all possible CPUs, not just all online ones
This is basically what the normal workqueue code also does, as far as I can
tell.
Signed-off-by: Jann Horn <[email protected]>
---
Notes:
compile-tested only.
While I think I probably got this stuff right, it might be good if
someone more familiar with the NUMA logic could give an opinion on this.
An alternative might be to only allocate workers for online nodes, but
then we'd have to either fiddle together logic to create more workers
on demand or punt requests on newly-onlined nodes over to older nodes.
Both of those don't seem very nice to me.
fs/io-wq.c | 80 +++++++++++++++++++++++-------------------------------
1 file changed, 34 insertions(+), 46 deletions(-)
diff --git a/fs/io-wq.c b/fs/io-wq.c
index 465f1a1eb52c..f27071e5cae2 100644
--- a/fs/io-wq.c
+++ b/fs/io-wq.c
@@ -105,7 +105,6 @@ struct io_wqe {
struct io_wq {
struct io_wqe **wqes;
unsigned long state;
- unsigned nr_wqes;
get_work_fn *get_work;
put_work_fn *put_work;
@@ -632,21 +631,22 @@ static inline bool io_wqe_need_worker(struct io_wqe *wqe, int index)
static int io_wq_manager(void *data)
{
struct io_wq *wq = data;
- int i;
+ int workers_to_create = num_possible_nodes();
+ int node;
/* create fixed workers */
- refcount_set(&wq->refs, wq->nr_wqes);
- for (i = 0; i < wq->nr_wqes; i++) {
- if (create_io_worker(wq, wq->wqes[i], IO_WQ_ACCT_BOUND))
- continue;
- goto err;
+ refcount_set(&wq->refs, workers_to_create);
+ for_each_node(node) {
+ if (!create_io_worker(wq, wq->wqes[node], IO_WQ_ACCT_BOUND))
+ goto err;
+ workers_to_create--;
}
complete(&wq->done);
while (!kthread_should_stop()) {
- for (i = 0; i < wq->nr_wqes; i++) {
- struct io_wqe *wqe = wq->wqes[i];
+ for_each_node(node) {
+ struct io_wqe *wqe = wq->wqes[node];
bool fork_worker[2] = { false, false };
spin_lock_irq(&wqe->lock);
@@ -668,7 +668,7 @@ static int io_wq_manager(void *data)
err:
set_bit(IO_WQ_BIT_ERROR, &wq->state);
set_bit(IO_WQ_BIT_EXIT, &wq->state);
- if (refcount_sub_and_test(wq->nr_wqes - i, &wq->refs))
+ if (refcount_sub_and_test(workers_to_create, &wq->refs))
complete(&wq->done);
return 0;
}
@@ -776,7 +776,7 @@ static bool io_wq_for_each_worker(struct io_wqe *wqe,
void io_wq_cancel_all(struct io_wq *wq)
{
- int i;
+ int node;
set_bit(IO_WQ_BIT_CANCEL, &wq->state);
@@ -785,8 +785,8 @@ void io_wq_cancel_all(struct io_wq *wq)
* to a worker and the worker putting itself on the busy_list
*/
rcu_read_lock();
- for (i = 0; i < wq->nr_wqes; i++) {
- struct io_wqe *wqe = wq->wqes[i];
+ for_each_node(node) {
+ struct io_wqe *wqe = wq->wqes[node];
io_wq_for_each_worker(wqe, io_wqe_worker_send_sig, NULL);
}
@@ -859,10 +859,10 @@ enum io_wq_cancel io_wq_cancel_cb(struct io_wq *wq, work_cancel_fn *cancel,
void *data)
{
enum io_wq_cancel ret = IO_WQ_CANCEL_NOTFOUND;
- int i;
+ int node;
- for (i = 0; i < wq->nr_wqes; i++) {
- struct io_wqe *wqe = wq->wqes[i];
+ for_each_node(node) {
+ struct io_wqe *wqe = wq->wqes[node];
ret = io_wqe_cancel_cb_work(wqe, cancel, data);
if (ret != IO_WQ_CANCEL_NOTFOUND)
@@ -936,10 +936,10 @@ static enum io_wq_cancel io_wqe_cancel_work(struct io_wqe *wqe,
enum io_wq_cancel io_wq_cancel_work(struct io_wq *wq, struct io_wq_work *cwork)
{
enum io_wq_cancel ret = IO_WQ_CANCEL_NOTFOUND;
- int i;
+ int node;
- for (i = 0; i < wq->nr_wqes; i++) {
- struct io_wqe *wqe = wq->wqes[i];
+ for_each_node(node) {
+ struct io_wqe *wqe = wq->wqes[node];
ret = io_wqe_cancel_work(wqe, cwork);
if (ret != IO_WQ_CANCEL_NOTFOUND)
@@ -970,10 +970,10 @@ static void io_wq_flush_func(struct io_wq_work **workptr)
void io_wq_flush(struct io_wq *wq)
{
struct io_wq_flush_data data;
- int i;
+ int node;
- for (i = 0; i < wq->nr_wqes; i++) {
- struct io_wqe *wqe = wq->wqes[i];
+ for_each_node(node) {
+ struct io_wqe *wqe = wq->wqes[node];
init_completion(&data.done);
INIT_IO_WORK(&data.work, io_wq_flush_func);
@@ -985,15 +985,14 @@ void io_wq_flush(struct io_wq *wq)
struct io_wq *io_wq_create(unsigned bounded, struct io_wq_data *data)
{
- int ret = -ENOMEM, i, node;
+ int ret = -ENOMEM, node;
struct io_wq *wq;
wq = kzalloc(sizeof(*wq), GFP_KERNEL);
if (!wq)
return ERR_PTR(-ENOMEM);
- wq->nr_wqes = num_online_nodes();
- wq->wqes = kcalloc(wq->nr_wqes, sizeof(struct io_wqe *), GFP_KERNEL);
+ wq->wqes = kcalloc(nr_node_ids, sizeof(struct io_wqe *), GFP_KERNEL);
if (!wq->wqes) {
kfree(wq);
return ERR_PTR(-ENOMEM);
@@ -1006,14 +1005,13 @@ struct io_wq *io_wq_create(unsigned bounded, struct io_wq_data *data)
wq->user = data->user;
wq->creds = data->creds;
- i = 0;
- for_each_online_node(node) {
+ for_each_node(node) {
struct io_wqe *wqe;
wqe = kzalloc_node(sizeof(struct io_wqe), GFP_KERNEL, node);
if (!wqe)
- break;
- wq->wqes[i] = wqe;
+ goto err;
+ wq->wqes[node] = wqe;
wqe->node = node;
wqe->acct[IO_WQ_ACCT_BOUND].max_workers = bounded;
atomic_set(&wqe->acct[IO_WQ_ACCT_BOUND].nr_running, 0);
@@ -1029,15 +1027,10 @@ struct io_wq *io_wq_create(unsigned bounded, struct io_wq_data *data)
INIT_HLIST_NULLS_HEAD(&wqe->free_list, 0);
INIT_HLIST_NULLS_HEAD(&wqe->busy_list, 1);
INIT_LIST_HEAD(&wqe->all_list);
-
- i++;
}
init_completion(&wq->done);
- if (i != wq->nr_wqes)
- goto err;
-
/* caller must have already done mmgrab() on this mm */
wq->mm = data->mm;
@@ -1056,8 +1049,8 @@ struct io_wq *io_wq_create(unsigned bounded, struct io_wq_data *data)
ret = PTR_ERR(wq->manager);
complete(&wq->done);
err:
- for (i = 0; i < wq->nr_wqes; i++)
- kfree(wq->wqes[i]);
+ for_each_node(node)
+ kfree(wq->wqes[node]);
kfree(wq->wqes);
kfree(wq);
return ERR_PTR(ret);
@@ -1071,26 +1064,21 @@ static bool io_wq_worker_wake(struct io_worker *worker, void *data)
void io_wq_destroy(struct io_wq *wq)
{
- int i;
+ int node;
set_bit(IO_WQ_BIT_EXIT, &wq->state);
if (wq->manager)
kthread_stop(wq->manager);
rcu_read_lock();
- for (i = 0; i < wq->nr_wqes; i++) {
- struct io_wqe *wqe = wq->wqes[i];
-
- if (!wqe)
- continue;
- io_wq_for_each_worker(wqe, io_wq_worker_wake, NULL);
- }
+ for_each_node(node)
+ io_wq_for_each_worker(wq->wqes[node], io_wq_worker_wake, NULL);
rcu_read_unlock();
wait_for_completion(&wq->done);
- for (i = 0; i < wq->nr_wqes; i++)
- kfree(wq->wqes[i]);
+ for_each_node(node)
+ kfree(wq->wqes[node]);
kfree(wq->wqes);
kfree(wq);
}
--
2.24.0.432.g9d3f5f5b63-goog
next reply other threads:[~2019-11-26 18:10 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-26 18:10 Jann Horn [this message]
2019-11-26 18:17 ` [PATCH] io-wq: fix handling of NUMA node IDs Jens Axboe
2019-11-26 18:59 ` Jens Axboe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox