From: Xiaoguang Wang <[email protected]>
To: [email protected]
Cc: [email protected], [email protected],
Xiaoguang Wang <[email protected]>
Subject: [PATCH v2] io_uring: fix poll_list race for SETUP_IOPOLL|SETUP_SQPOLL
Date: Wed, 19 Feb 2020 00:28:00 +0800 [thread overview]
Message-ID: <[email protected]> (raw)
After making ext4 support iopoll method:
let ext4_file_operations's iopoll method be iomap_dio_iopoll(),
we found fio can easily hang in fio_ioring_getevents() with below fio
job:
rm -f testfile; sync;
sudo fio -name=fiotest -filename=testfile -iodepth=128 -thread
-rw=write -ioengine=io_uring -hipri=1 -sqthread_poll=1 -direct=1
-bs=4k -size=10G -numjobs=8 -runtime=2000 -group_reporting
with IORING_SETUP_SQPOLL and IORING_SETUP_IOPOLL enabled.
There are two issues that results in this hang, one reason is that
when IORING_SETUP_SQPOLL and IORING_SETUP_IOPOLL are enabled, fio
does not use io_uring_enter to get completed events, it relies on
kernel io_sq_thread to poll for completed events.
Another reason is that there is a race: when io_submit_sqes() in
io_sq_thread() submits a batch of sqes, variable 'inflight' will
record the number of submitted reqs, then io_sq_thread will poll for
reqs which have been added to poll_list. But note, if some previous
reqs have been punted to io worker, these reqs will won't be in
poll_list timely. io_sq_thread() will only poll for a part of previous
submitted reqs, and then find poll_list is empty, reset variable
'inflight' to be zero. If app just waits these deferred reqs and does
not wake up io_sq_thread again, then hang happens.
For app that entirely relies on io_sq_thread to poll completed requests,
let io_iopoll_req_issued() wake up io_sq_thread properly when adding new
element to poll_list.
Fixes: 2b2ed9750fc9 ("io_uring: fix bad inflight accounting for SETUP_IOPOLL|SETUP_SQTHREAD")
Signed-off-by: Xiaoguang Wang <[email protected]>
---
V2:
simple code cleanups and add necessary comments.
---
fs/io_uring.c | 72 ++++++++++++++++++++++++++++-----------------------
1 file changed, 40 insertions(+), 32 deletions(-)
diff --git a/fs/io_uring.c b/fs/io_uring.c
index 77f22c3da30f..b6d7c45d0d0d 100644
--- a/fs/io_uring.c
+++ b/fs/io_uring.c
@@ -1793,6 +1793,9 @@ static void io_iopoll_req_issued(struct io_kiocb *req)
list_add(&req->list, &ctx->poll_list);
else
list_add_tail(&req->list, &ctx->poll_list);
+
+ if (ctx->flags & IORING_SETUP_SQPOLL && wq_has_sleeper(&ctx->sqo_wait))
+ wake_up(&ctx->sqo_wait);
}
static void io_file_put(struct io_submit_state *state)
@@ -5011,9 +5014,9 @@ static int io_sq_thread(void *data)
const struct cred *old_cred;
mm_segment_t old_fs;
DEFINE_WAIT(wait);
- unsigned inflight;
unsigned long timeout;
- int ret;
+ int ret = 0;
+ bool needs_uring_lock = false;
complete(&ctx->completions[1]);
@@ -5021,39 +5024,21 @@ static int io_sq_thread(void *data)
set_fs(USER_DS);
old_cred = override_creds(ctx->creds);
- ret = timeout = inflight = 0;
+ if (ctx->flags & IORING_SETUP_IOPOLL)
+ needs_uring_lock = true;
+ timeout = jiffies + ctx->sq_thread_idle;
while (!kthread_should_park()) {
unsigned int to_submit;
- if (inflight) {
+ if (!list_empty(&ctx->poll_list)) {
unsigned nr_events = 0;
- if (ctx->flags & IORING_SETUP_IOPOLL) {
- /*
- * inflight is the count of the maximum possible
- * entries we submitted, but it can be smaller
- * if we dropped some of them. If we don't have
- * poll entries available, then we know that we
- * have nothing left to poll for. Reset the
- * inflight count to zero in that case.
- */
- mutex_lock(&ctx->uring_lock);
- if (!list_empty(&ctx->poll_list))
- __io_iopoll_check(ctx, &nr_events, 0);
- else
- inflight = 0;
- mutex_unlock(&ctx->uring_lock);
- } else {
- /*
- * Normal IO, just pretend everything completed.
- * We don't have to poll completions for that.
- */
- nr_events = inflight;
- }
-
- inflight -= nr_events;
- if (!inflight)
+ mutex_lock(&ctx->uring_lock);
+ if (!list_empty(&ctx->poll_list))
+ __io_iopoll_check(ctx, &nr_events, 0);
+ if (list_empty(&ctx->poll_list))
timeout = jiffies + ctx->sq_thread_idle;
+ mutex_unlock(&ctx->uring_lock);
}
to_submit = io_sqring_entries(ctx);
@@ -5070,7 +5055,7 @@ static int io_sq_thread(void *data)
* more IO, we should wait for the application to
* reap events and wake us up.
*/
- if (inflight ||
+ if (!list_empty(&ctx->poll_list) ||
(!time_after(jiffies, timeout) && ret != -EBUSY &&
!percpu_ref_is_dying(&ctx->refs))) {
cond_resched();
@@ -5089,6 +5074,24 @@ static int io_sq_thread(void *data)
cur_mm = NULL;
}
+ /*
+ * While doing polled IO, before going to sleep, we need
+ * to check if there are new reqs added to poll_list, it
+ * is because reqs may have been punted to io worker and
+ * will be added to poll_list later, hence check the
+ * poll_list again, meanwhile we need to hold uring_lock
+ * to do this check, otherwise we may lose wakeup event
+ * in io_iopoll_req_issued().
+ */
+ if (needs_uring_lock) {
+ mutex_lock(&ctx->uring_lock);
+ if (!list_empty(&ctx->poll_list)) {
+ mutex_unlock(&ctx->uring_lock);
+ cond_resched();
+ continue;
+ }
+ }
+
prepare_to_wait(&ctx->sqo_wait, &wait,
TASK_INTERRUPTIBLE);
@@ -5101,16 +5104,22 @@ static int io_sq_thread(void *data)
if (!to_submit || ret == -EBUSY) {
if (kthread_should_park()) {
finish_wait(&ctx->sqo_wait, &wait);
+ if (needs_uring_lock)
+ mutex_unlock(&ctx->uring_lock);
break;
}
if (signal_pending(current))
flush_signals(current);
+ if (needs_uring_lock)
+ mutex_unlock(&ctx->uring_lock);
schedule();
finish_wait(&ctx->sqo_wait, &wait);
ctx->rings->sq_flags &= ~IORING_SQ_NEED_WAKEUP;
continue;
}
+ if (needs_uring_lock)
+ mutex_unlock(&ctx->uring_lock);
finish_wait(&ctx->sqo_wait, &wait);
ctx->rings->sq_flags &= ~IORING_SQ_NEED_WAKEUP;
@@ -5119,8 +5128,7 @@ static int io_sq_thread(void *data)
mutex_lock(&ctx->uring_lock);
ret = io_submit_sqes(ctx, to_submit, NULL, -1, &cur_mm, true);
mutex_unlock(&ctx->uring_lock);
- if (ret > 0)
- inflight += ret;
+ timeout = jiffies + ctx->sq_thread_idle;
}
set_fs(old_fs);
--
2.17.2
next reply other threads:[~2020-02-18 16:28 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-18 16:28 Xiaoguang Wang [this message]
2020-02-18 16:39 ` [PATCH v2] io_uring: fix poll_list race for SETUP_IOPOLL|SETUP_SQPOLL Xiaoguang Wang
2020-02-19 1:49 ` Xiaoguang Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200218162800.3089-1-xiaoguang.wang@linux.alibaba.com \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox