From: Jens Axboe <[email protected]>
To: [email protected]
Cc: [email protected], [email protected],
[email protected], Jens Axboe <[email protected]>
Subject: [PATCH 8/9] io_uring: mark requests that we can do poll async in io_op_defs
Date: Thu, 20 Feb 2020 13:31:50 -0700 [thread overview]
Message-ID: <[email protected]> (raw)
In-Reply-To: <[email protected]>
Add a pollin/pollout field to the request table, and have commands that
we can safely poll for properly marked.
Signed-off-by: Jens Axboe <[email protected]>
---
fs/io_uring.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/fs/io_uring.c b/fs/io_uring.c
index 5991bcc24387..ca96e0206132 100644
--- a/fs/io_uring.c
+++ b/fs/io_uring.c
@@ -624,6 +624,9 @@ struct io_op_def {
unsigned file_table : 1;
/* needs ->fs */
unsigned needs_fs : 1;
+ /* set if opcode supports polled "wait" */
+ unsigned pollin : 1;
+ unsigned pollout : 1;
};
static const struct io_op_def io_op_defs[] = {
@@ -633,6 +636,7 @@ static const struct io_op_def io_op_defs[] = {
.needs_mm = 1,
.needs_file = 1,
.unbound_nonreg_file = 1,
+ .pollin = 1,
},
[IORING_OP_WRITEV] = {
.async_ctx = 1,
@@ -640,6 +644,7 @@ static const struct io_op_def io_op_defs[] = {
.needs_file = 1,
.hash_reg_file = 1,
.unbound_nonreg_file = 1,
+ .pollout = 1,
},
[IORING_OP_FSYNC] = {
.needs_file = 1,
@@ -647,11 +652,13 @@ static const struct io_op_def io_op_defs[] = {
[IORING_OP_READ_FIXED] = {
.needs_file = 1,
.unbound_nonreg_file = 1,
+ .pollin = 1,
},
[IORING_OP_WRITE_FIXED] = {
.needs_file = 1,
.hash_reg_file = 1,
.unbound_nonreg_file = 1,
+ .pollout = 1,
},
[IORING_OP_POLL_ADD] = {
.needs_file = 1,
@@ -667,6 +674,7 @@ static const struct io_op_def io_op_defs[] = {
.needs_file = 1,
.unbound_nonreg_file = 1,
.needs_fs = 1,
+ .pollout = 1,
},
[IORING_OP_RECVMSG] = {
.async_ctx = 1,
@@ -674,6 +682,7 @@ static const struct io_op_def io_op_defs[] = {
.needs_file = 1,
.unbound_nonreg_file = 1,
.needs_fs = 1,
+ .pollin = 1,
},
[IORING_OP_TIMEOUT] = {
.async_ctx = 1,
@@ -685,6 +694,7 @@ static const struct io_op_def io_op_defs[] = {
.needs_file = 1,
.unbound_nonreg_file = 1,
.file_table = 1,
+ .pollin = 1,
},
[IORING_OP_ASYNC_CANCEL] = {},
[IORING_OP_LINK_TIMEOUT] = {
@@ -696,6 +706,7 @@ static const struct io_op_def io_op_defs[] = {
.needs_mm = 1,
.needs_file = 1,
.unbound_nonreg_file = 1,
+ .pollout = 1,
},
[IORING_OP_FALLOCATE] = {
.needs_file = 1,
@@ -724,11 +735,13 @@ static const struct io_op_def io_op_defs[] = {
.needs_mm = 1,
.needs_file = 1,
.unbound_nonreg_file = 1,
+ .pollin = 1,
},
[IORING_OP_WRITE] = {
.needs_mm = 1,
.needs_file = 1,
.unbound_nonreg_file = 1,
+ .pollout = 1,
},
[IORING_OP_FADVISE] = {
.needs_file = 1,
@@ -740,11 +753,13 @@ static const struct io_op_def io_op_defs[] = {
.needs_mm = 1,
.needs_file = 1,
.unbound_nonreg_file = 1,
+ .pollout = 1,
},
[IORING_OP_RECV] = {
.needs_mm = 1,
.needs_file = 1,
.unbound_nonreg_file = 1,
+ .pollin = 1,
},
[IORING_OP_OPENAT2] = {
.needs_file = 1,
--
2.25.1
next prev parent reply other threads:[~2020-02-20 20:32 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-20 20:31 [PATCHSET 0/9] io_uring: use polled async retry Jens Axboe
2020-02-20 20:31 ` [PATCH 1/9] io_uring: consider any io_read/write -EAGAIN as final Jens Axboe
2020-02-20 20:31 ` [PATCH 2/9] io_uring: io_accept() should hold on to submit reference on retry Jens Axboe
2020-02-20 20:31 ` [PATCH 3/9] sched: move io-wq/workqueue worker sched in/out into helpers Jens Axboe
2020-02-20 20:31 ` [PATCH 4/9] task_work_run: don't take ->pi_lock unconditionally Jens Axboe
2020-02-20 20:31 ` [PATCH 5/9] kernel: abstract out task work helpers Jens Axboe
2020-02-20 21:07 ` Peter Zijlstra
2020-02-20 21:08 ` Jens Axboe
2020-02-20 20:31 ` [PATCH 6/9] sched: add a sched_work list Jens Axboe
2020-02-20 21:17 ` Peter Zijlstra
2020-02-20 21:53 ` Jens Axboe
2020-02-20 22:02 ` Jens Axboe
2020-02-20 20:31 ` [PATCH 7/9] io_uring: add per-task callback handler Jens Axboe
2020-02-20 22:02 ` Jann Horn
2020-02-20 22:14 ` Jens Axboe
2020-02-20 22:18 ` Jens Axboe
2020-02-20 22:25 ` Jann Horn
2020-02-20 22:23 ` Jens Axboe
2020-02-20 22:38 ` Jann Horn
2020-02-20 22:56 ` Jens Axboe
2020-02-20 22:58 ` Jann Horn
2020-02-20 23:02 ` Jens Axboe
2020-02-20 22:23 ` Jann Horn
2020-02-20 23:00 ` Jens Axboe
2020-02-20 23:12 ` Jann Horn
2020-02-20 23:22 ` Jens Axboe
2020-02-21 1:29 ` Jann Horn
2020-02-21 17:32 ` Jens Axboe
2020-02-21 19:24 ` Jann Horn
2020-02-21 20:18 ` Jens Axboe
2020-02-20 22:56 ` Jann Horn
2020-02-21 10:47 ` Peter Zijlstra
2020-02-21 14:49 ` Jens Axboe
2020-02-21 15:02 ` Jann Horn
2020-02-21 16:12 ` Peter Zijlstra
2020-02-21 16:23 ` Peter Zijlstra
2020-02-21 20:13 ` Jens Axboe
2020-02-21 13:51 ` Pavel Begunkov
2020-02-21 14:50 ` Jens Axboe
2020-02-21 18:30 ` Pavel Begunkov
2020-02-21 19:10 ` Jens Axboe
2020-02-21 19:22 ` Pavel Begunkov
2020-02-23 6:00 ` Jens Axboe
2020-02-23 6:26 ` Jens Axboe
2020-02-23 11:02 ` Pavel Begunkov
2020-02-23 14:49 ` Jens Axboe
2020-02-23 14:58 ` Jens Axboe
2020-02-23 15:07 ` Jens Axboe
2020-02-23 18:04 ` Pavel Begunkov
2020-02-23 18:06 ` Jens Axboe
2020-02-23 17:55 ` Pavel Begunkov
2020-02-20 20:31 ` Jens Axboe [this message]
2020-02-20 20:31 ` [PATCH 9/9] io_uring: use poll driven retry for files that support it Jens Axboe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox