From: Jens Axboe <[email protected]>
To: [email protected]
Cc: [email protected], [email protected], Jens Axboe <[email protected]>
Subject: [PATCH 3/6] io_uring: move read/write side file based prep into op handler
Date: Wed, 4 Mar 2020 11:00:13 -0700 [thread overview]
Message-ID: <[email protected]> (raw)
In-Reply-To: <[email protected]>
In preparation for not needing req->file in on the prep side at all.
Signed-off-by: Jens Axboe <[email protected]>
---
fs/io_uring.c | 73 +++++++++++++++++++++++++++++++--------------------
1 file changed, 44 insertions(+), 29 deletions(-)
diff --git a/fs/io_uring.c b/fs/io_uring.c
index c29a721114e0..ed70ac09ca18 100644
--- a/fs/io_uring.c
+++ b/fs/io_uring.c
@@ -2030,37 +2030,19 @@ static bool io_file_supports_async(struct file *file)
return false;
}
-static int io_prep_rw(struct io_kiocb *req, const struct io_uring_sqe *sqe,
- bool force_nonblock)
+static int io_prep_rw(struct io_kiocb *req, bool force_nonblock)
{
- struct io_ring_ctx *ctx = req->ctx;
struct kiocb *kiocb = &req->rw.kiocb;
- unsigned ioprio;
- int ret;
if (S_ISREG(file_inode(req->file)->i_mode))
req->flags |= REQ_F_ISREG;
- kiocb->ki_pos = READ_ONCE(sqe->off);
if (kiocb->ki_pos == -1 && !(req->file->f_mode & FMODE_STREAM)) {
req->flags |= REQ_F_CUR_POS;
kiocb->ki_pos = req->file->f_pos;
}
kiocb->ki_hint = ki_hint_validate(file_write_hint(kiocb->ki_filp));
- kiocb->ki_flags = iocb_flags(kiocb->ki_filp);
- ret = kiocb_set_rw_flags(kiocb, READ_ONCE(sqe->rw_flags));
- if (unlikely(ret))
- return ret;
-
- ioprio = READ_ONCE(sqe->ioprio);
- if (ioprio) {
- ret = ioprio_check_cap(ioprio);
- if (ret)
- return ret;
-
- kiocb->ki_ioprio = ioprio;
- } else
- kiocb->ki_ioprio = get_current_ioprio();
+ kiocb->ki_flags |= iocb_flags(kiocb->ki_filp);
/* don't allow async punt if RWF_NOWAIT was requested */
if ((kiocb->ki_flags & IOCB_NOWAIT) ||
@@ -2070,7 +2052,7 @@ static int io_prep_rw(struct io_kiocb *req, const struct io_uring_sqe *sqe,
if (force_nonblock)
kiocb->ki_flags |= IOCB_NOWAIT;
- if (ctx->flags & IORING_SETUP_IOPOLL) {
+ if (req->ctx->flags & IORING_SETUP_IOPOLL) {
if (!(kiocb->ki_flags & IOCB_DIRECT) ||
!kiocb->ki_filp->f_op->iopoll)
return -EOPNOTSUPP;
@@ -2084,6 +2066,31 @@ static int io_prep_rw(struct io_kiocb *req, const struct io_uring_sqe *sqe,
kiocb->ki_complete = io_complete_rw;
}
+ return 0;
+}
+
+static int io_sqe_prep_rw(struct io_kiocb *req, const struct io_uring_sqe *sqe)
+{
+ struct kiocb *kiocb = &req->rw.kiocb;
+ unsigned ioprio;
+ int ret;
+
+ kiocb->ki_pos = READ_ONCE(sqe->off);
+ kiocb->ki_flags = 0;
+ ret = kiocb_set_rw_flags(kiocb, READ_ONCE(sqe->rw_flags));
+ if (unlikely(ret))
+ return ret;
+
+ ioprio = READ_ONCE(sqe->ioprio);
+ if (ioprio) {
+ ret = ioprio_check_cap(ioprio);
+ if (ret)
+ return ret;
+
+ kiocb->ki_ioprio = ioprio;
+ } else
+ kiocb->ki_ioprio = get_current_ioprio();
+
req->rw.addr = READ_ONCE(sqe->addr);
req->rw.len = READ_ONCE(sqe->len);
/* we own ->private, reuse it for the buffer index / buffer ID */
@@ -2487,13 +2494,10 @@ static int io_read_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe,
struct iov_iter iter;
ssize_t ret;
- ret = io_prep_rw(req, sqe, force_nonblock);
+ ret = io_sqe_prep_rw(req, sqe);
if (ret)
return ret;
- if (unlikely(!(req->file->f_mode & FMODE_READ)))
- return -EBADF;
-
/* either don't need iovec imported or already have it */
if (!req->io || req->flags & REQ_F_NEED_CLEANUP)
return 0;
@@ -2518,6 +2522,13 @@ static int io_read(struct io_kiocb *req, bool force_nonblock)
size_t iov_count;
ssize_t io_size, ret;
+ if (unlikely(!(req->file->f_mode & FMODE_READ)))
+ return -EBADF;
+
+ ret = io_prep_rw(req, force_nonblock);
+ if (ret)
+ return ret;
+
ret = io_import_iovec(READ, req, &iovec, &iter, !force_nonblock);
if (ret < 0)
return ret;
@@ -2576,13 +2587,10 @@ static int io_write_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe,
struct iov_iter iter;
ssize_t ret;
- ret = io_prep_rw(req, sqe, force_nonblock);
+ ret = io_sqe_prep_rw(req, sqe);
if (ret)
return ret;
- if (unlikely(!(req->file->f_mode & FMODE_WRITE)))
- return -EBADF;
-
/* either don't need iovec imported or already have it */
if (!req->io || req->flags & REQ_F_NEED_CLEANUP)
return 0;
@@ -2607,6 +2615,13 @@ static int io_write(struct io_kiocb *req, bool force_nonblock)
size_t iov_count;
ssize_t ret, io_size;
+ if (unlikely(!(req->file->f_mode & FMODE_WRITE)))
+ return -EBADF;
+
+ ret = io_prep_rw(req, force_nonblock);
+ if (ret)
+ return ret;
+
ret = io_import_iovec(WRITE, req, &iovec, &iter, !force_nonblock);
if (ret < 0)
return ret;
--
2.25.1
next prev parent reply other threads:[~2020-03-04 18:00 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-04 18:00 [PATCHSET v2 0/6] Support selectable file descriptors Jens Axboe
2020-03-04 18:00 ` [PATCH 1/6] fs: openat2: Extend open_how to allow userspace-selected fds Jens Axboe
2020-03-04 18:00 ` [PATCH 2/6] io_uring: move CLOSE req->file checking into handler Jens Axboe
2020-03-04 18:00 ` Jens Axboe [this message]
2020-03-04 18:00 ` [PATCH 4/6] io_uring: support deferred retrival of file from fd Jens Axboe
2020-03-04 18:00 ` [PATCH 5/6] net: allow specific fd selection for __sys_accept4_file() Jens Axboe
2020-03-04 18:00 ` [PATCH 6/6] io_uring: allow specific fd for IORING_OP_ACCEPT Jens Axboe
2020-03-04 19:02 ` Josh Triplett
2020-03-04 19:09 ` Jens Axboe
2020-03-04 19:51 ` Josh Triplett
2020-03-04 19:03 ` [PATCHSET v2 0/6] Support selectable file descriptors Josh Triplett
2020-03-04 19:10 ` Jens Axboe
2020-03-04 19:28 ` Jeff Layton
2020-03-04 19:50 ` Jens Axboe
2020-03-04 19:56 ` Josh Triplett
2020-03-04 20:00 ` Jens Axboe
2020-03-04 20:09 ` Josh Triplett
2020-03-04 20:14 ` Jens Axboe
2020-03-09 20:33 ` Stefan Metzmacher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox