From: Jens Axboe <[email protected]>
To: [email protected]
Cc: [email protected], [email protected],
[email protected], Jens Axboe <[email protected]>
Subject: [PATCH 03/11] mm: add support for async page locking
Date: Fri, 22 May 2020 14:23:03 -0600 [thread overview]
Message-ID: <[email protected]> (raw)
In-Reply-To: <[email protected]>
Normally waiting for a page to become unlocked, or locking the page,
requires waiting for IO to complete. Add support for lock_page_async()
and wait_on_page_locked_async(), which are callback based instead. This
allows a caller to get notified when a page becomes unlocked, rather
than wait for it.
We use the iocb->private field to pass in this necessary data for this
to happen. struct wait_page_key is made public, and we define struct
wait_page_async as the interface between the caller and the core.
Signed-off-by: Jens Axboe <[email protected]>
---
include/linux/fs.h | 2 ++
include/linux/pagemap.h | 22 +++++++++++++++++++++
mm/filemap.c | 44 ++++++++++++++++++++++++++++++++++-------
3 files changed, 61 insertions(+), 7 deletions(-)
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 7e84d823c6a8..82b989695ab9 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -314,6 +314,8 @@ enum rw_hint {
#define IOCB_SYNC (1 << 5)
#define IOCB_WRITE (1 << 6)
#define IOCB_NOWAIT (1 << 7)
+/* iocb->private holds wait_page_async struct */
+#define IOCB_WAITQ (1 << 8)
struct kiocb {
struct file *ki_filp;
diff --git a/include/linux/pagemap.h b/include/linux/pagemap.h
index a8f7bd8ea1c6..39af9f890866 100644
--- a/include/linux/pagemap.h
+++ b/include/linux/pagemap.h
@@ -456,8 +456,21 @@ static inline pgoff_t linear_page_index(struct vm_area_struct *vma,
return pgoff;
}
+/* This has the same layout as wait_bit_key - see fs/cachefiles/rdwr.c */
+struct wait_page_key {
+ struct page *page;
+ int bit_nr;
+ int page_match;
+};
+
+struct wait_page_async {
+ struct wait_queue_entry wait;
+ struct wait_page_key key;
+};
+
extern void __lock_page(struct page *page);
extern int __lock_page_killable(struct page *page);
+extern int __lock_page_async(struct page *page, struct wait_page_async *wait);
extern int __lock_page_or_retry(struct page *page, struct mm_struct *mm,
unsigned int flags);
extern void unlock_page(struct page *page);
@@ -494,6 +507,15 @@ static inline int lock_page_killable(struct page *page)
return 0;
}
+static inline int lock_page_async(struct page *page,
+ struct wait_page_async *wait)
+{
+ int ret;
+ if (!trylock_page(page))
+ ret = __lock_page_async(page, wait);
+ return ret;
+}
+
/*
* lock_page_or_retry - Lock the page, unless this would block and the
* caller indicated that it can handle a retry.
diff --git a/mm/filemap.c b/mm/filemap.c
index 80747f1377d5..0bc77f431bea 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -990,13 +990,6 @@ void __init pagecache_init(void)
page_writeback_init();
}
-/* This has the same layout as wait_bit_key - see fs/cachefiles/rdwr.c */
-struct wait_page_key {
- struct page *page;
- int bit_nr;
- int page_match;
-};
-
struct wait_page_queue {
struct page *page;
int bit_nr;
@@ -1210,6 +1203,38 @@ int wait_on_page_bit_killable(struct page *page, int bit_nr)
}
EXPORT_SYMBOL(wait_on_page_bit_killable);
+static int __wait_on_page_locked_async(struct page *page,
+ struct wait_page_async *wait)
+{
+ struct wait_queue_head *q = page_waitqueue(page);
+ int ret = 0;
+
+ wait->key.page = page;
+ wait->key.bit_nr = PG_locked;
+
+ spin_lock_irq(&q->lock);
+ if (PageLocked(page)) {
+ __add_wait_queue_entry_tail(q, &wait->wait);
+ SetPageWaiters(page);
+ ret = -EIOCBQUEUED;
+ }
+ spin_unlock_irq(&q->lock);
+ return ret;
+}
+
+static int wait_on_page_locked_async(struct page *page,
+ struct wait_page_async *wait)
+{
+ int ret;
+ if (!PageLocked(page))
+ return 0;
+ ret = __wait_on_page_locked_async(compound_head(page), wait);
+ if (ret == -EIOCBQUEUED && !PageLocked(page))
+ ret = 0;
+ return ret;
+}
+
+
/**
* put_and_wait_on_page_locked - Drop a reference and wait for it to be unlocked
* @page: The page to wait for.
@@ -1372,6 +1397,11 @@ int __lock_page_killable(struct page *__page)
}
EXPORT_SYMBOL_GPL(__lock_page_killable);
+int __lock_page_async(struct page *page, struct wait_page_async *wait)
+{
+ return wait_on_page_locked_async(page, wait);
+}
+
/*
* Return values:
* 1 - page is locked; mmap_sem is still held.
--
2.26.2
next prev parent reply other threads:[~2020-05-22 20:23 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-22 20:23 [PATCHSET RFC 0/11] Add support for async buffered reads Jens Axboe
2020-05-22 20:23 ` [PATCH 01/11] block: read-ahead submission should imply no-wait as well Jens Axboe
2020-05-22 20:23 ` [PATCH 02/11] mm: allow read-ahead with IOCB_NOWAIT set Jens Axboe
2020-05-22 20:23 ` Jens Axboe [this message]
2020-05-22 20:57 ` [PATCH v2 03/11] mm: add support for async page locking Jens Axboe
2020-05-22 20:23 ` [PATCH 04/11] mm: support async buffered reads in generic_file_buffered_read() Jens Axboe
2020-05-22 20:23 ` [PATCH 05/11] fs: add FMODE_BUF_RASYNC Jens Axboe
2020-05-22 20:23 ` [PATCH 06/11] ext4: flag as supporting buffered async reads Jens Axboe
2020-05-22 20:23 ` [PATCH 07/11] block: flag block devices as supporting IOCB_WAITQ Jens Axboe
2020-05-22 20:23 ` [PATCH 08/11] xfs: flag files as supporting buffered async reads Jens Axboe
2020-05-22 20:23 ` [PATCH 09/11] btrfs: " Jens Axboe
2020-05-22 20:23 ` [PATCH 10/11] mm: add kiocb_wait_page_async_init() helper Jens Axboe
2020-05-22 20:23 ` [PATCH 11/11] io_uring: support true async buffered reads, if file provides it Jens Axboe
-- strict thread matches above, loose matches on Subject: below --
2020-05-23 1:50 [PATCHSET v2 RFC 0/11] Add support for async buffered reads Jens Axboe
2020-05-23 1:50 ` [PATCH 03/11] mm: add support for async page locking Jens Axboe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox