[PATCH 4/4] fsx: add IO_URING test

[Zorro Lang <zlang@redhat.com>]

New IO_URING test for fsx, use -U option to enable IO_URING test.

Signed-off-by: Zorro Lang <zlang@redhat.com>
---
 ltp/fsx.c | 154 +++++++++++++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 140 insertions(+), 14 deletions(-)

diff --git a/ltp/fsx.c b/ltp/fsx.c
index 7c76655a..1b7401a2 100644
--- a/ltp/fsx.c
+++ b/ltp/fsx.c
@@ -34,6 +34,9 @@
 #ifdef AIO
 #include <libaio.h>
 #endif
+#ifdef URING
+#include <liburing.h>
+#endif
 #include <sys/syscall.h>
 
 #ifndef MAP_FILE
@@ -176,21 +179,17 @@ int	integrity = 0;			/* -i flag */
 int	fsxgoodfd = 0;
 int	o_direct;			/* -Z */
 int	aio = 0;
+int	uring = 0;
 int	mark_nr = 0;
 
 int page_size;
 int page_mask;
 int mmap_mask;
-#ifdef AIO
-int aio_rw(int rw, int fd, char *buf, unsigned len, unsigned offset);
+int fsx_rw(int rw, int fd, char *buf, unsigned len, unsigned offset);
 #define READ 0
 #define WRITE 1
-#define fsxread(a,b,c,d)	aio_rw(READ, a,b,c,d)
-#define fsxwrite(a,b,c,d)	aio_rw(WRITE, a,b,c,d)
-#else
-#define fsxread(a,b,c,d)	read(a,b,c)
-#define fsxwrite(a,b,c,d)	write(a,b,c)
-#endif
+#define fsxread(a,b,c,d)	fsx_rw(READ, a,b,c,d)
+#define fsxwrite(a,b,c,d)	fsx_rw(WRITE, a,b,c,d)
 
 const char *replayops = NULL;
 const char *recordops = NULL;
@@ -2242,7 +2241,7 @@ void
 usage(void)
 {
 	fprintf(stdout, "usage: %s",
-		"fsx [-dknqxABEFJLOWZ] [-b opnum] [-c Prob] [-g filldata] [-i logdev] [-j logid] [-l flen] [-m start:end] [-o oplen] [-p progressinterval] [-r readbdy] [-s style] [-t truncbdy] [-w writebdy] [-D startingop] [-N numops] [-P dirpath] [-S seed] fname\n\
+		"fsx [-dknqxBEFJLOWZ][-A|-U] [-b opnum] [-c Prob] [-g filldata] [-i logdev] [-j logid] [-l flen] [-m start:end] [-o oplen] [-p progressinterval] [-r readbdy] [-s style] [-t truncbdy] [-w writebdy] [-D startingop] [-N numops] [-P dirpath] [-S seed] fname\n\
 	-b opnum: beginning operation number (default 1)\n\
 	-c P: 1 in P chance of file close+open at each op (default infinity)\n\
 	-d: debug output for all operations\n\
@@ -2265,7 +2264,10 @@ usage(void)
 	-y synchronize changes to a file\n"
 
 #ifdef AIO
-"	-A: Use the AIO system calls\n"
+"	-A: Use the AIO system calls, -A excludes -U\n"
+#endif
+#ifdef URING
+"	-U: Use the IO_URING system calls, -U excludes -A\n"
 #endif
 "	-D startingop: debug output starting at specified operation\n"
 #ifdef HAVE_LINUX_FALLOC_H
@@ -2425,13 +2427,127 @@ out_error:
 	errno = -ret;
 	return -1;
 }
+#endif
+
+#ifdef URING
+struct io_uring ring;
+#define URING_ENTRIES	1024
+int
+uring_setup()
+{
+	int ret;
+
+	ret = io_uring_queue_init(URING_ENTRIES, &ring, 0);
+	if (ret != 0) {
+		fprintf(stderr, "uring_setup: io_uring_queue_init failed: %s\n",
+                        strerror(ret));
+                return -1;
+        }
+        return 0;
+}
 
-int aio_rw(int rw, int fd, char *buf, unsigned len, unsigned offset)
+int
+__uring_rw(int rw, int fd, char *buf, unsigned len, unsigned offset)
 {
+        struct io_uring_sqe	*sqe;
+        struct io_uring_cqe	*cqe;
 	int ret;
+	int res, res2 = 0;
+	char *p = buf;
+	unsigned l = len;
+	unsigned o = offset;
+
+	/*
+	 * Due to io_uring tries non-blocking IOs (especially read), that
+	 * always cause 'normal' short reading. To avoid this short read
+	 * fail, try to loop read/write (escpecilly read) data.
+	 */
+ uring_loop:
+	sqe = io_uring_get_sqe(&ring);
+	if (!sqe) {
+		fprintf(stderr, "uring_rw: io_uring_get_sqe failed: %s\n",
+		        strerror(errno));
+		return -1;
+        }
+
+	if (rw == READ) {
+		io_uring_prep_read(sqe, fd, p, l, o);
+	} else {
+		io_uring_prep_write(sqe, fd, p, l, o);
+	}
+
+	ret = io_uring_submit(&ring);
+	if (ret != 1) {
+		fprintf(stderr, "errcode=%d\n", -ret);
+		fprintf(stderr, "uring %s: io_uring_submit failed: %s\n",
+		        rw == READ ? "read":"write", strerror(-ret));
+		goto uring_error;
+	}
+
+	ret = io_uring_wait_cqe(&ring, &cqe);
+	if (ret < 0) {
+		if (ret == 0)
+			fprintf(stderr, "uring %s: no events available\n",
+			        rw == READ ? "read":"write");
+		else {
+			fprintf(stderr, "errcode=%d\n", -ret);
+			fprintf(stderr, "uring %s: io_uring_wait_cqe failed: %s\n",
+			        rw == READ ? "read":"write", strerror(-ret));
+		}
+		goto uring_error;
+	}
+	res = cqe->res;
+	io_uring_cqe_seen(&ring, cqe);
+
+	res2 += res;
+	if (len != res2) {
+		if (res > 0) {
+			o += res;
+			l -= res;
+			p += res;
+			if (l > 0)
+				goto uring_loop;
+		} else if (res < 0) {
+			ret = res;
+			fprintf(stderr, "errcode=%d\n", -ret);
+			fprintf(stderr, "uring %s: io_uring failed: %s\n",
+			        rw == READ ? "read":"write", strerror(-ret));
+			goto uring_error;
+		} else {
+			fprintf(stderr, "uring %s bad io length: %d instead of %u\n",
+			        rw == READ ? "read":"write", res2, len);
+		}
+	}
+	return res2;
+
+ uring_error:
+	/*
+	 * The caller expects error return in traditional libc
+	 * convention, i.e. -1 and the errno set to error.
+	 */
+	errno = -ret;
+	return -1;
+}
+#endif
+
+int fsx_rw(int rw, int fd, char *buf, unsigned len, unsigned offset)
+{
+	int ret = -1;
 
 	if (aio) {
+#ifdef AIO
 		ret = __aio_rw(rw, fd, buf, len, offset);
+#elif
+		fprintf(stderr, "io_rw: need AIO support!\n");
+		exit(111);
+#endif
+	} else if (uring) {
+#ifdef URING
+		ret = __uring_rw(rw, fd, buf, len, offset);
+#elif
+		fprintf(stderr, "io_rw: need IO_URING support!\n");
+		exit(111);
+#endif
 	} else {
 		if (rw == READ)
 			ret = read(fd, buf, len);
@@ -2441,8 +2557,6 @@ int aio_rw(int rw, int fd, char *buf, unsigned len, unsigned offset)
 	return ret;
 }
 
-#endif
-
 #define test_fallocate(mode) __test_fallocate(mode, #mode)
 
 int
@@ -2496,7 +2610,7 @@ main(int argc, char **argv)
 	setvbuf(stdout, (char *)0, _IOLBF, 0); /* line buffered stdout */
 
 	while ((ch = getopt_long(argc, argv,
-				 "b:c:dfg:i:j:kl:m:no:p:qr:s:t:w:xyABD:EFJKHzCILN:OP:RS:WXZ",
+				 "b:c:dfg:i:j:kl:m:no:p:qr:s:t:w:xyABD:EFJKHzCILN:OP:RS:UWXZ",
 				 longopts, NULL)) != EOF)
 		switch (ch) {
 		case 'b':
@@ -2604,6 +2718,9 @@ main(int argc, char **argv)
 		case 'A':
 		        aio = 1;
 			break;
+		case 'U':
+		        uring = 1;
+			break;
 		case 'D':
 			debugstart = getnum(optarg, &endp);
 			if (debugstart < 1)
@@ -2694,6 +2811,11 @@ main(int argc, char **argv)
 	if (argc != 1)
 		usage();
 
+	if (aio && uring) {
+		fprintf(stderr, "-A and -U shouldn't be used together\n");
+		usage();
+	}
+
 	if (integrity && !dirpath) {
 		fprintf(stderr, "option -i <logdev> requires -P <dirpath>\n");
 		usage();
@@ -2784,6 +2906,10 @@ main(int argc, char **argv)
 	if (aio) 
 		aio_setup();
 #endif
+#ifdef URING
+	if (uring)
+		uring_setup();
+#endif
 
 	if (!(o_flags & O_TRUNC)) {
 		off_t ret;
-- 
2.20.1