From: Jens Axboe <[email protected]>
To: [email protected]
Cc: Jens Axboe <[email protected]>
Subject: [PATCH 3/8] io_uring: use private ctx wait queue entries for SQPOLL
Date: Wed, 2 Sep 2020 20:20:48 -0600 [thread overview]
Message-ID: <[email protected]> (raw)
In-Reply-To: <[email protected]>
This is in preparation to sharing the poller thread between rings. For
that we need per-ring wait_queue_entry storage, and we can't easily put
that on the stack if one thread is managing multiple rings.
We'll also be sharing the wait_queue_head across rings for the purposes
of wakeups, provide the usual private ring wait_queue_head for now but
make it a pointer so we can easily override it when sharing.
Signed-off-by: Jens Axboe <[email protected]>
---
fs/io_uring.c | 34 +++++++++++++++++++---------------
1 file changed, 19 insertions(+), 15 deletions(-)
diff --git a/fs/io_uring.c b/fs/io_uring.c
index e2e62dbc4b93..76f02db37ffc 100644
--- a/fs/io_uring.c
+++ b/fs/io_uring.c
@@ -277,7 +277,10 @@ struct io_ring_ctx {
struct io_wq *io_wq;
struct task_struct *sqo_thread; /* if using sq thread polling */
struct mm_struct *sqo_mm;
- wait_queue_head_t sqo_wait;
+ struct wait_queue_head *sqo_wait;
+ struct wait_queue_head __sqo_wait;
+ struct wait_queue_entry sqo_wait_entry;
+
/*
* For SQPOLL usage - no reference is held to this file table, we
@@ -1083,7 +1086,8 @@ static struct io_ring_ctx *io_ring_ctx_alloc(struct io_uring_params *p)
goto err;
ctx->flags = p->flags;
- init_waitqueue_head(&ctx->sqo_wait);
+ init_waitqueue_head(&ctx->__sqo_wait);
+ ctx->sqo_wait = &ctx->__sqo_wait;
init_waitqueue_head(&ctx->cq_wait);
INIT_LIST_HEAD(&ctx->cq_overflow_list);
init_completion(&ctx->ref_comp);
@@ -1346,8 +1350,8 @@ static void io_cqring_ev_posted(struct io_ring_ctx *ctx)
{
if (waitqueue_active(&ctx->wait))
wake_up(&ctx->wait);
- if (waitqueue_active(&ctx->sqo_wait))
- wake_up(&ctx->sqo_wait);
+ if (waitqueue_active(ctx->sqo_wait))
+ wake_up(ctx->sqo_wait);
if (io_should_trigger_evfd(ctx))
eventfd_signal(ctx->cq_ev_fd, 1);
}
@@ -2411,9 +2415,8 @@ static void io_iopoll_req_issued(struct io_kiocb *req)
else
list_add_tail(&req->inflight_entry, &ctx->iopoll_list);
- if ((ctx->flags & IORING_SETUP_SQPOLL) &&
- wq_has_sleeper(&ctx->sqo_wait))
- wake_up(&ctx->sqo_wait);
+ if ((ctx->flags & IORING_SETUP_SQPOLL) && wq_has_sleeper(ctx->sqo_wait))
+ wake_up(ctx->sqo_wait);
}
static void __io_state_file_put(struct io_submit_state *state)
@@ -6614,10 +6617,11 @@ static int io_sq_thread(void *data)
{
struct io_ring_ctx *ctx = data;
const struct cred *old_cred;
- DEFINE_WAIT(wait);
unsigned long timeout;
int ret = 0;
+ init_wait(&ctx->sqo_wait_entry);
+
complete(&ctx->sq_thread_comp);
old_cred = override_creds(ctx->creds);
@@ -6671,7 +6675,7 @@ static int io_sq_thread(void *data)
continue;
}
- prepare_to_wait(&ctx->sqo_wait, &wait,
+ prepare_to_wait(ctx->sqo_wait, &ctx->sqo_wait_entry,
TASK_INTERRUPTIBLE);
/*
@@ -6683,7 +6687,7 @@ static int io_sq_thread(void *data)
*/
if ((ctx->flags & IORING_SETUP_IOPOLL) &&
!list_empty_careful(&ctx->iopoll_list)) {
- finish_wait(&ctx->sqo_wait, &wait);
+ finish_wait(ctx->sqo_wait, &ctx->sqo_wait_entry);
continue;
}
@@ -6692,22 +6696,22 @@ static int io_sq_thread(void *data)
to_submit = io_sqring_entries(ctx);
if (!to_submit || ret == -EBUSY) {
if (kthread_should_park()) {
- finish_wait(&ctx->sqo_wait, &wait);
+ finish_wait(ctx->sqo_wait, &ctx->sqo_wait_entry);
break;
}
if (io_run_task_work()) {
- finish_wait(&ctx->sqo_wait, &wait);
+ finish_wait(ctx->sqo_wait, &ctx->sqo_wait_entry);
io_ring_clear_wakeup_flag(ctx);
continue;
}
schedule();
- finish_wait(&ctx->sqo_wait, &wait);
+ finish_wait(ctx->sqo_wait, &ctx->sqo_wait_entry);
io_ring_clear_wakeup_flag(ctx);
ret = 0;
continue;
}
- finish_wait(&ctx->sqo_wait, &wait);
+ finish_wait(ctx->sqo_wait, &ctx->sqo_wait_entry);
io_ring_clear_wakeup_flag(ctx);
}
@@ -8371,7 +8375,7 @@ SYSCALL_DEFINE6(io_uring_enter, unsigned int, fd, u32, to_submit,
if (!list_empty_careful(&ctx->cq_overflow_list))
io_cqring_overflow_flush(ctx, false);
if (flags & IORING_ENTER_SQ_WAKEUP)
- wake_up(&ctx->sqo_wait);
+ wake_up(ctx->sqo_wait);
submitted = to_submit;
} else if (to_submit) {
mutex_lock(&ctx->uring_lock);
--
2.28.0
next prev parent reply other threads:[~2020-09-03 2:21 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-03 2:20 [PATCHSET for-next 0/8] io_uring SQPOLL improvements Jens Axboe
2020-09-03 2:20 ` [PATCH 1/8] io_uring: io_sq_thread() doesn't need to flush signals Jens Axboe
2020-09-03 2:20 ` [PATCH 2/8] io_uring: allow SQPOLL with CAP_SYS_NICE privileges Jens Axboe
2020-09-03 2:20 ` Jens Axboe [this message]
2020-09-03 2:20 ` [PATCH 4/8] io_uring: move SQPOLL post-wakeup ring need wakeup flag into wake handler Jens Axboe
2020-09-03 2:20 ` [PATCH 5/8] io_uring: split work handling part of SQPOLL into helper Jens Axboe
2020-09-03 2:20 ` [PATCH 6/8] io_uring: split SQPOLL data into separate structure Jens Axboe
2020-09-03 2:20 ` [PATCH 7/8] io_uring: base SQPOLL handling off io_sq_data Jens Axboe
2020-09-03 2:20 ` [PATCH 8/8] io_uring: enable IORING_SETUP_ATTACH_WQ to attach to SQPOLL thread too Jens Axboe
2020-09-07 8:56 ` Xiaoguang Wang
2020-09-07 14:00 ` Pavel Begunkov
2020-09-07 16:11 ` Jens Axboe
2020-09-07 16:14 ` Jens Axboe
2020-09-07 16:18 ` Jens Axboe
2020-09-08 2:28 ` Xiaoguang Wang
2020-09-08 2:53 ` Xiaoguang Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
[email protected] \
[email protected] \
[email protected] \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox