From: Jens Axboe <[email protected]>
To: [email protected], [email protected]
Cc: [email protected], [email protected], [email protected],
Jens Axboe <[email protected]>
Subject: [PATCH 2/4] kernel: add task_sigpending() helper
Date: Thu, 8 Oct 2020 09:27:50 -0600 [thread overview]
Message-ID: <[email protected]> (raw)
In-Reply-To: <[email protected]>
This is in preparation for maintaining signal_pending() as the decider
of whether or not a schedule() loop should be broken, or continue
sleeping. This is different than the core signal use cases, where we
really want to know if an actual signal is pending or not.
task_sigpending() returns non-zero if TIF_SIGPENDING is set.
Only core kernel use cases should care about the distinction between
the two, make sure those use the task_sigpending() helper.
Signed-off-by: Jens Axboe <[email protected]>
---
include/linux/sched/signal.h | 9 +++++++--
kernel/events/uprobes.c | 2 +-
kernel/signal.c | 8 ++++----
3 files changed, 12 insertions(+), 7 deletions(-)
diff --git a/include/linux/sched/signal.h b/include/linux/sched/signal.h
index 1bad18a1d8ba..404145dc536e 100644
--- a/include/linux/sched/signal.h
+++ b/include/linux/sched/signal.h
@@ -353,11 +353,16 @@ static inline int restart_syscall(void)
return -ERESTARTNOINTR;
}
-static inline int signal_pending(struct task_struct *p)
+static inline int task_sigpending(struct task_struct *p)
{
return unlikely(test_tsk_thread_flag(p,TIF_SIGPENDING));
}
+static inline int signal_pending(struct task_struct *p)
+{
+ return task_sigpending(p);
+}
+
static inline int __fatal_signal_pending(struct task_struct *p)
{
return unlikely(sigismember(&p->pending.signal, SIGKILL));
@@ -365,7 +370,7 @@ static inline int __fatal_signal_pending(struct task_struct *p)
static inline int fatal_signal_pending(struct task_struct *p)
{
- return signal_pending(p) && __fatal_signal_pending(p);
+ return task_sigpending(p) && __fatal_signal_pending(p);
}
static inline int signal_pending_state(long state, struct task_struct *p)
diff --git a/kernel/events/uprobes.c b/kernel/events/uprobes.c
index 0e18aaf23a7b..8bb26a338e06 100644
--- a/kernel/events/uprobes.c
+++ b/kernel/events/uprobes.c
@@ -1973,7 +1973,7 @@ bool uprobe_deny_signal(void)
WARN_ON_ONCE(utask->state != UTASK_SSTEP);
- if (signal_pending(t)) {
+ if (task_sigpending(t)) {
spin_lock_irq(&t->sighand->siglock);
clear_tsk_thread_flag(t, TIF_SIGPENDING);
spin_unlock_irq(&t->sighand->siglock);
diff --git a/kernel/signal.c b/kernel/signal.c
index a38b3edc6851..9f86246a8637 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -983,7 +983,7 @@ static inline bool wants_signal(int sig, struct task_struct *p)
if (task_is_stopped_or_traced(p))
return false;
- return task_curr(p) || !signal_pending(p);
+ return task_curr(p) || !task_sigpending(p);
}
static void complete_signal(int sig, struct task_struct *p, enum pid_type type)
@@ -2822,7 +2822,7 @@ static void retarget_shared_pending(struct task_struct *tsk, sigset_t *which)
/* Remove the signals this thread can handle. */
sigandsets(&retarget, &retarget, &t->blocked);
- if (!signal_pending(t))
+ if (!task_sigpending(t))
signal_wake_up(t, 0);
if (sigisemptyset(&retarget))
@@ -2856,7 +2856,7 @@ void exit_signals(struct task_struct *tsk)
cgroup_threadgroup_change_end(tsk);
- if (!signal_pending(tsk))
+ if (!task_sigpending(tsk))
goto out;
unblocked = tsk->blocked;
@@ -2900,7 +2900,7 @@ long do_no_restart_syscall(struct restart_block *param)
static void __set_task_blocked(struct task_struct *tsk, const sigset_t *newset)
{
- if (signal_pending(tsk) && !thread_group_empty(tsk)) {
+ if (task_sigpending(tsk) && !thread_group_empty(tsk)) {
sigset_t newblocked;
/* A set of now blocked but previously unblocked signals. */
sigandnsets(&newblocked, newset, ¤t->blocked);
--
2.28.0
next prev parent reply other threads:[~2020-10-08 15:28 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-08 15:27 [PATCHSET v4] Add support for TIF_NOTIFY_SIGNAL Jens Axboe
2020-10-08 15:27 ` [PATCH 1/4] tracehook: clear TIF_NOTIFY_RESUME in tracehook_notify_resume() Jens Axboe
2020-10-13 23:35 ` Thomas Gleixner
2020-10-14 1:13 ` Jens Axboe
2020-10-08 15:27 ` Jens Axboe [this message]
2020-10-13 23:36 ` [PATCH 2/4] kernel: add task_sigpending() helper Thomas Gleixner
2020-10-08 15:27 ` [PATCH 3/4] kernel: add support for TIF_NOTIFY_SIGNAL Jens Axboe
2020-10-09 14:43 ` Oleg Nesterov
2020-10-09 15:13 ` Jens Axboe
2020-10-13 23:45 ` Thomas Gleixner
2020-10-13 23:54 ` Jens Axboe
2020-10-13 23:42 ` Thomas Gleixner
2020-10-13 23:45 ` Jens Axboe
2020-10-08 15:27 ` [PATCH 4/4] task_work: use TIF_NOTIFY_SIGNAL if available Jens Axboe
2020-10-13 23:50 ` Thomas Gleixner
2020-10-13 23:55 ` Jens Axboe
2020-10-09 14:30 ` [PATCHSET v4] Add support for TIF_NOTIFY_SIGNAL Oleg Nesterov
2020-10-09 15:16 ` Jens Axboe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox