public inbox for [email protected]
 help / color / mirror / Atom feed
From: Jeffle Xu <[email protected]>
To: [email protected], [email protected]
Cc: [email protected], [email protected],
	[email protected], [email protected], [email protected],
	[email protected]
Subject: [PATCH v3 09/11] dm: support IO polling for bio-based dm device
Date: Mon,  8 Feb 2021 16:52:41 +0800	[thread overview]
Message-ID: <[email protected]> (raw)
In-Reply-To: <[email protected]>

DM will iterate and poll all polling hardware queues of all target mq
devices when polling IO for dm device. To mitigate the race introduced
by iterating all target hw queues, a per-hw-queue flag is maintained
to indicate whether this polling hw queue currently being polled on or
not. Every polling hw queue is exclusive to one polling instance, i.e.,
the polling instance will skip this polling hw queue if this hw queue
currently is being polled by another polling instance, and start
polling on the next hw queue.

IO polling is enabled when all underlying target devices are capable
of IO polling. The sanity check supports the stacked device model, in
which one dm device may be build upon another dm device. In this case,
the mapped device will check if the underlying dm target device
supports IO polling.

Signed-off-by: Jeffle Xu <[email protected]>
---
 drivers/md/dm-table.c         | 26 ++++++++++++++
 drivers/md/dm.c               | 64 +++++++++++++++++++++++++++++++++++
 include/linux/device-mapper.h |  1 +
 3 files changed, 91 insertions(+)

diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c
index aa37f3e82238..b090b4c9692d 100644
--- a/drivers/md/dm-table.c
+++ b/drivers/md/dm-table.c
@@ -1764,6 +1764,19 @@ static int device_requires_stable_pages(struct dm_target *ti,
 	return blk_queue_stable_writes(q);
 }
 
+static int device_not_poll_capable(struct dm_target *ti, struct dm_dev *dev,
+				   sector_t start, sector_t len, void *data)
+{
+	struct request_queue *q = bdev_get_queue(dev->bdev);
+
+	return !test_bit(QUEUE_FLAG_POLL, &q->queue_flags);
+}
+
+int dm_table_supports_poll(struct dm_table *t)
+{
+	return dm_table_all_devs_attr(t, device_not_poll_capable, NULL);
+}
+
 /*
  * type->iterate_devices() should be called when the sanity check needs to
  * iterate and check all underlying data devices. iterate_devices() will
@@ -1875,6 +1888,19 @@ void dm_table_set_restrictions(struct dm_table *t, struct request_queue *q,
 #endif
 
 	blk_queue_update_readahead(q);
+
+	/*
+	 * Check for request-based device is remained to
+	 * dm_mq_init_request_queue()->blk_mq_init_allocated_queue().
+	 * For bio-based device, only set QUEUE_FLAG_POLL when all underlying
+	 * devices supporting polling.
+	 */
+	if (__table_type_bio_based(t->type)) {
+		if (dm_table_supports_poll(t))
+			blk_queue_flag_set(QUEUE_FLAG_POLL, q);
+		else
+			blk_queue_flag_clear(QUEUE_FLAG_POLL, q);
+	}
 }
 
 unsigned int dm_table_get_num_targets(struct dm_table *t)
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index c2945c90745e..8423f1347bb8 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -1657,6 +1657,68 @@ static blk_qc_t dm_submit_bio(struct bio *bio)
 	return BLK_QC_T_NONE;
 }
 
+static int dm_poll_one_md(struct mapped_device *md);
+
+static int dm_poll_one_dev(struct dm_target *ti, struct dm_dev *dev,
+				sector_t start, sector_t len, void *data)
+{
+	int i, *count = data;
+	struct request_queue *q = bdev_get_queue(dev->bdev);
+	struct blk_mq_hw_ctx *hctx;
+
+	if (queue_is_mq(q)) {
+		if (!percpu_ref_tryget(&q->q_usage_counter))
+			return 0;
+
+		queue_for_each_poll_hw_ctx(q, hctx, i)
+			*count += blk_mq_poll_hctx(q, hctx);
+
+		percpu_ref_put(&q->q_usage_counter);
+	} else
+		*count += dm_poll_one_md(dev->bdev->bd_disk->private_data);
+
+	return 0;
+}
+
+static int dm_poll_one_md(struct mapped_device *md)
+{
+	int i, srcu_idx, ret = 0;
+	struct dm_table *t;
+	struct dm_target *ti;
+
+	t = dm_get_live_table(md, &srcu_idx);
+
+	for (i = 0; i < dm_table_get_num_targets(t); i++) {
+		ti = dm_table_get_target(t, i);
+		ti->type->iterate_devices(ti, dm_poll_one_dev, &ret);
+	}
+
+	dm_put_live_table(md, srcu_idx);
+
+	return ret;
+}
+
+static int dm_bio_poll(struct request_queue *q, blk_qc_t cookie)
+{
+	struct gendisk *disk = queue_to_disk(q);
+	struct mapped_device *md = disk->private_data;
+
+	return dm_poll_one_md(md);
+}
+
+static bool dm_bio_poll_capable(struct gendisk *disk)
+{
+	int ret, srcu_idx;
+	struct mapped_device *md = disk->private_data;
+	struct dm_table *t;
+
+	t = dm_get_live_table(md, &srcu_idx);
+	ret = dm_table_supports_poll(t);
+	dm_put_live_table(md, srcu_idx);
+
+	return ret;
+}
+
 /*-----------------------------------------------------------------
  * An IDR is used to keep track of allocated minor numbers.
  *---------------------------------------------------------------*/
@@ -3049,6 +3111,8 @@ static const struct pr_ops dm_pr_ops = {
 };
 
 static const struct block_device_operations dm_blk_dops = {
+	.poll = dm_bio_poll,
+	.poll_capable = dm_bio_poll_capable,
 	.submit_bio = dm_submit_bio,
 	.open = dm_blk_open,
 	.release = dm_blk_close,
diff --git a/include/linux/device-mapper.h b/include/linux/device-mapper.h
index 61a66fb8ebb3..6a9de3fd0087 100644
--- a/include/linux/device-mapper.h
+++ b/include/linux/device-mapper.h
@@ -515,6 +515,7 @@ unsigned int dm_table_get_num_targets(struct dm_table *t);
 fmode_t dm_table_get_mode(struct dm_table *t);
 struct mapped_device *dm_table_get_md(struct dm_table *t);
 const char *dm_table_device_name(struct dm_table *t);
+int dm_table_supports_poll(struct dm_table *t);
 
 /*
  * Trigger an event.
-- 
2.27.0


  parent reply	other threads:[~2021-02-08  8:57 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-08  8:52 [PATCH v3 00/11] dm: support IO polling Jeffle Xu
2021-02-08  8:52 ` [PATCH v3 01/11] block: move definition of blk_qc_t to types.h Jeffle Xu
2021-02-08  8:52 ` [PATCH v3 02/11] block: add queue_to_disk() to get gendisk from request_queue Jeffle Xu
2021-02-08  8:52 ` [PATCH v3 03/11] block: add poll method to support bio-based IO polling Jeffle Xu
2021-02-08  8:52 ` [PATCH v3 04/11] block: add poll_capable " Jeffle Xu
2021-02-08  8:52 ` [PATCH v3 05/11] block/mq: extract one helper function polling hw queue Jeffle Xu
2021-02-08  8:52 ` [PATCH v3 06/11] block/mq: add iterator for polling hw queues Jeffle Xu
2021-02-08  8:52 ` [PATCH v3 07/11] dm: always return BLK_QC_T_NONE for bio-based device Jeffle Xu
2021-02-08  8:52 ` [PATCH v3 08/11] dm: fix iterate_device sanity check Jeffle Xu
2021-02-08  8:52 ` Jeffle Xu [this message]
2021-02-09  3:11   ` [PATCH v3 09/11] dm: support IO polling for bio-based dm device Ming Lei
2021-02-09  6:13     ` JeffleXu
2021-02-09  6:22       ` JeffleXu
2021-02-09  8:07       ` Ming Lei
2021-02-09  8:46         ` JeffleXu
2021-02-19 14:17   ` [dm-devel] " Mikulas Patocka
2021-02-24  1:42     ` JeffleXu
2021-02-26  8:22     ` JeffleXu
2021-02-08  8:52 ` [PATCH v3 10/11] nvme/pci: don't wait for locked polling queue Jeffle Xu
2021-02-08  8:52 ` [PATCH v3 11/11] dm: fastpath of bio-based polling Jeffle Xu
2021-02-19 19:38   ` [dm-devel] " Mikulas Patocka
2021-02-26  8:12     ` JeffleXu
2021-03-02 19:03       ` Mikulas Patocka
2021-03-03  1:55         ` JeffleXu
2021-02-17 13:15 ` [PATCH v3 00/11] dm: support IO polling JeffleXu
2021-03-10 20:01 ` Mike Snitzer
2021-03-11  7:07   ` [dm-devel] " JeffleXu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    [email protected] \
    [email protected] \
    [email protected] \
    [email protected] \
    [email protected] \
    [email protected] \
    [email protected] \
    [email protected] \
    [email protected] \
    [email protected] \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox