From: Jens Axboe <[email protected]>
To: [email protected], [email protected]
Cc: [email protected], [email protected],
Jens Axboe <[email protected]>
Subject: [PATCH 2/3] io_uring: use iov_iter state save/restore helpers
Date: Tue, 14 Sep 2021 08:17:49 -0600 [thread overview]
Message-ID: <[email protected]> (raw)
In-Reply-To: <[email protected]>
Get rid of the need to do re-expand and revert on an iterator when we
encounter a short IO, or failure that warrants a retry. Use the new
state save/restore helpers instead.
We keep the iov_iter_state persistent across retries, if we need to
restart the read or write operation. If there's a pending retry, the
operation will always exit with the state correctly saved.
Signed-off-by: Jens Axboe <[email protected]>
---
fs/io_uring.c | 62 ++++++++++++++++++++++++++++++++++-----------------
1 file changed, 41 insertions(+), 21 deletions(-)
diff --git a/fs/io_uring.c b/fs/io_uring.c
index 855ea544807f..dbc97d440801 100644
--- a/fs/io_uring.c
+++ b/fs/io_uring.c
@@ -712,6 +712,7 @@ struct io_async_rw {
struct iovec fast_iov[UIO_FASTIOV];
const struct iovec *free_iovec;
struct iov_iter iter;
+ struct iov_iter_state iter_state;
size_t bytes_done;
struct wait_page_queue wpq;
};
@@ -2608,8 +2609,7 @@ static bool io_resubmit_prep(struct io_kiocb *req)
if (!rw)
return !io_req_prep_async(req);
- /* may have left rw->iter inconsistent on -EIOCBQUEUED */
- iov_iter_revert(&rw->iter, req->result - iov_iter_count(&rw->iter));
+ iov_iter_restore(&rw->iter, &rw->iter_state);
return true;
}
@@ -3310,12 +3310,16 @@ static int io_setup_async_rw(struct io_kiocb *req, const struct iovec *iovec,
if (!force && !io_op_defs[req->opcode].needs_async_setup)
return 0;
if (!req->async_data) {
+ struct io_async_rw *iorw;
+
if (io_alloc_async_data(req)) {
kfree(iovec);
return -ENOMEM;
}
io_req_map_rw(req, iovec, fast_iov, iter);
+ iorw = req->async_data;
+ iov_iter_save_state(&iorw->iter, &iorw->iter_state);
}
return 0;
}
@@ -3334,6 +3338,7 @@ static inline int io_rw_prep_async(struct io_kiocb *req, int rw)
iorw->free_iovec = iov;
if (iov)
req->flags |= REQ_F_NEED_CLEANUP;
+ iov_iter_save_state(&iorw->iter, &iorw->iter_state);
return 0;
}
@@ -3437,19 +3442,23 @@ static int io_read(struct io_kiocb *req, unsigned int issue_flags)
struct kiocb *kiocb = &req->rw.kiocb;
struct iov_iter __iter, *iter = &__iter;
struct io_async_rw *rw = req->async_data;
- ssize_t io_size, ret, ret2;
bool force_nonblock = issue_flags & IO_URING_F_NONBLOCK;
+ struct iov_iter_state __state, *state;
+ ssize_t ret, ret2;
if (rw) {
iter = &rw->iter;
+ state = &rw->iter_state;
+ iov_iter_restore(iter, state);
iovec = NULL;
} else {
ret = io_import_iovec(READ, req, &iovec, iter, !force_nonblock);
if (ret < 0)
return ret;
+ state = &__state;
+ iov_iter_save_state(iter, state);
}
- io_size = iov_iter_count(iter);
- req->result = io_size;
+ req->result = iov_iter_count(iter);
/* Ensure we clear previously set non-block flag */
if (!force_nonblock)
@@ -3463,7 +3472,7 @@ static int io_read(struct io_kiocb *req, unsigned int issue_flags)
return ret ?: -EAGAIN;
}
- ret = rw_verify_area(READ, req->file, io_kiocb_ppos(kiocb), io_size);
+ ret = rw_verify_area(READ, req->file, io_kiocb_ppos(kiocb), req->result);
if (unlikely(ret)) {
kfree(iovec);
return ret;
@@ -3479,30 +3488,36 @@ static int io_read(struct io_kiocb *req, unsigned int issue_flags)
/* no retry on NONBLOCK nor RWF_NOWAIT */
if (req->flags & REQ_F_NOWAIT)
goto done;
- /* some cases will consume bytes even on error returns */
- iov_iter_reexpand(iter, iter->count + iter->truncated);
- iov_iter_revert(iter, io_size - iov_iter_count(iter));
ret = 0;
} else if (ret == -EIOCBQUEUED) {
goto out_free;
- } else if (ret <= 0 || ret == io_size || !force_nonblock ||
+ } else if (ret <= 0 || ret == req->result || !force_nonblock ||
(req->flags & REQ_F_NOWAIT) || !need_read_all(req)) {
/* read all, failed, already did sync or don't want to retry */
goto done;
}
+ iov_iter_restore(iter, state);
+
ret2 = io_setup_async_rw(req, iovec, inline_vecs, iter, true);
if (ret2)
return ret2;
iovec = NULL;
rw = req->async_data;
- /* now use our persistent iterator, if we aren't already */
- iter = &rw->iter;
+ /* now use our persistent iterator and state, if we aren't already */
+ if (iter != &rw->iter) {
+ iter = &rw->iter;
+ state = &rw->iter_state;
+ }
do {
- io_size -= ret;
rw->bytes_done += ret;
+ iov_iter_advance(iter, ret);
+ if (!iov_iter_count(iter))
+ break;
+ iov_iter_save_state(iter, state);
+
/* if we can retry, do so with the callbacks armed */
if (!io_rw_should_retry(req)) {
kiocb->ki_flags &= ~IOCB_WAITQ;
@@ -3520,7 +3535,7 @@ static int io_read(struct io_kiocb *req, unsigned int issue_flags)
return 0;
/* we got some bytes, but not all. retry. */
kiocb->ki_flags &= ~IOCB_WAITQ;
- } while (ret > 0 && ret < io_size);
+ } while (ret > 0);
done:
kiocb_done(kiocb, ret, issue_flags);
out_free:
@@ -3543,19 +3558,24 @@ static int io_write(struct io_kiocb *req, unsigned int issue_flags)
struct kiocb *kiocb = &req->rw.kiocb;
struct iov_iter __iter, *iter = &__iter;
struct io_async_rw *rw = req->async_data;
- ssize_t ret, ret2, io_size;
bool force_nonblock = issue_flags & IO_URING_F_NONBLOCK;
+ struct iov_iter_state __state, *state;
+ ssize_t ret, ret2;
if (rw) {
iter = &rw->iter;
+ state = &rw->iter_state;
+ iov_iter_restore(iter, state);
iovec = NULL;
} else {
ret = io_import_iovec(WRITE, req, &iovec, iter, !force_nonblock);
if (ret < 0)
return ret;
+ state = &__state;
+ iov_iter_save_state(iter, state);
}
- io_size = iov_iter_count(iter);
- req->result = io_size;
+ req->result = iov_iter_count(iter);
+ ret2 = 0;
/* Ensure we clear previously set non-block flag */
if (!force_nonblock)
@@ -3572,7 +3592,7 @@ static int io_write(struct io_kiocb *req, unsigned int issue_flags)
(req->flags & REQ_F_ISREG))
goto copy_iov;
- ret = rw_verify_area(WRITE, req->file, io_kiocb_ppos(kiocb), io_size);
+ ret = rw_verify_area(WRITE, req->file, io_kiocb_ppos(kiocb), req->result);
if (unlikely(ret))
goto out_free;
@@ -3619,9 +3639,9 @@ static int io_write(struct io_kiocb *req, unsigned int issue_flags)
kiocb_done(kiocb, ret2, issue_flags);
} else {
copy_iov:
- /* some cases will consume bytes even on error returns */
- iov_iter_reexpand(iter, iter->count + iter->truncated);
- iov_iter_revert(iter, io_size - iov_iter_count(iter));
+ iov_iter_restore(iter, state);
+ if (ret2 > 0)
+ iov_iter_advance(iter, ret2);
ret = io_setup_async_rw(req, iovec, inline_vecs, iter, false);
return ret ?: -EAGAIN;
}
--
2.33.0
next prev parent reply other threads:[~2021-09-14 14:18 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-14 14:17 [PATCHSET v2 0/3] Add ability to save/restore iov_iter state Jens Axboe
2021-09-14 14:17 ` [PATCH 1/3] iov_iter: add helper to save " Jens Axboe
2021-09-14 14:17 ` Jens Axboe [this message]
2021-09-14 18:45 ` [PATCH 2/3] io_uring: use iov_iter state save/restore helpers Linus Torvalds
2021-09-14 19:37 ` Jens Axboe
2021-09-14 23:02 ` Jens Axboe
2021-09-14 14:17 ` [PATCH 3/3] Revert "iov_iter: track truncated size" Jens Axboe
-- strict thread matches above, loose matches on Subject: below --
2021-09-15 16:29 [PATCHSET v3 0/3] Add ability to save/restore iov_iter state Jens Axboe
2021-09-15 16:29 ` [PATCH 2/3] io_uring: use iov_iter state save/restore helpers Jens Axboe
2021-09-10 18:25 [PATCHSET 0/3] Add ability to save/restore iov_iter state Jens Axboe
2021-09-10 18:25 ` [PATCH 2/3] io_uring: use iov_iter state save/restore helpers Jens Axboe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox