From: Jens Axboe <[email protected]>
To: [email protected], [email protected]
Cc: Jens Axboe <[email protected]>, Hannes Reinecke <[email protected]>
Subject: [PATCH 3/4] nvme: separate command prep and issue
Date: Wed, 15 Dec 2021 09:24:20 -0700 [thread overview]
Message-ID: <[email protected]> (raw)
In-Reply-To: <[email protected]>
Add a nvme_prep_rq() helper to setup a command, and nvme_queue_rq() is
adapted to use this helper.
Reviewed-by: Hannes Reinecke <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
---
drivers/nvme/host/pci.c | 57 ++++++++++++++++++++++++-----------------
1 file changed, 33 insertions(+), 24 deletions(-)
diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index 09ea21f75439..6be6b1ab4285 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -918,52 +918,32 @@ static blk_status_t nvme_map_metadata(struct nvme_dev *dev, struct request *req,
return BLK_STS_OK;
}
-/*
- * NOTE: ns is NULL when called on the admin queue.
- */
-static blk_status_t nvme_queue_rq(struct blk_mq_hw_ctx *hctx,
- const struct blk_mq_queue_data *bd)
+static blk_status_t nvme_prep_rq(struct nvme_dev *dev, struct request *req)
{
- struct nvme_ns *ns = hctx->queue->queuedata;
- struct nvme_queue *nvmeq = hctx->driver_data;
- struct nvme_dev *dev = nvmeq->dev;
- struct request *req = bd->rq;
struct nvme_iod *iod = blk_mq_rq_to_pdu(req);
- struct nvme_command *cmnd = &iod->cmd;
blk_status_t ret;
iod->aborted = 0;
iod->npages = -1;
iod->nents = 0;
- /*
- * We should not need to do this, but we're still using this to
- * ensure we can drain requests on a dying queue.
- */
- if (unlikely(!test_bit(NVMEQ_ENABLED, &nvmeq->flags)))
- return BLK_STS_IOERR;
-
- if (!nvme_check_ready(&dev->ctrl, req, true))
- return nvme_fail_nonready_command(&dev->ctrl, req);
-
- ret = nvme_setup_cmd(ns, req);
+ ret = nvme_setup_cmd(req->q->queuedata, req);
if (ret)
return ret;
if (blk_rq_nr_phys_segments(req)) {
- ret = nvme_map_data(dev, req, cmnd);
+ ret = nvme_map_data(dev, req, &iod->cmd);
if (ret)
goto out_free_cmd;
}
if (blk_integrity_rq(req)) {
- ret = nvme_map_metadata(dev, req, cmnd);
+ ret = nvme_map_metadata(dev, req, &iod->cmd);
if (ret)
goto out_unmap_data;
}
blk_mq_start_request(req);
- nvme_submit_cmd(nvmeq, cmnd, bd->last);
return BLK_STS_OK;
out_unmap_data:
nvme_unmap_data(dev, req);
@@ -972,6 +952,35 @@ static blk_status_t nvme_queue_rq(struct blk_mq_hw_ctx *hctx,
return ret;
}
+/*
+ * NOTE: ns is NULL when called on the admin queue.
+ */
+static blk_status_t nvme_queue_rq(struct blk_mq_hw_ctx *hctx,
+ const struct blk_mq_queue_data *bd)
+{
+ struct nvme_queue *nvmeq = hctx->driver_data;
+ struct nvme_dev *dev = nvmeq->dev;
+ struct request *req = bd->rq;
+ struct nvme_iod *iod = blk_mq_rq_to_pdu(req);
+ blk_status_t ret;
+
+ /*
+ * We should not need to do this, but we're still using this to
+ * ensure we can drain requests on a dying queue.
+ */
+ if (unlikely(!test_bit(NVMEQ_ENABLED, &nvmeq->flags)))
+ return BLK_STS_IOERR;
+
+ if (unlikely(!nvme_check_ready(&dev->ctrl, req, true)))
+ return nvme_fail_nonready_command(&dev->ctrl, req);
+
+ ret = nvme_prep_rq(dev, req);
+ if (unlikely(ret))
+ return ret;
+ nvme_submit_cmd(nvmeq, &iod->cmd, bd->last);
+ return BLK_STS_OK;
+}
+
static __always_inline void nvme_pci_unmap_rq(struct request *req)
{
struct nvme_iod *iod = blk_mq_rq_to_pdu(req);
--
2.34.1
next prev parent reply other threads:[~2021-12-15 16:24 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-15 16:24 [PATCHSET v3 0/4] Add support for list issue Jens Axboe
2021-12-15 16:24 ` [PATCH 1/4] block: add mq_ops->queue_rqs hook Jens Axboe
2021-12-16 9:01 ` Christoph Hellwig
2021-12-20 20:36 ` Keith Busch
2021-12-20 20:47 ` Jens Axboe
2021-12-15 16:24 ` [PATCH 2/4] nvme: split command copy into a helper Jens Axboe
2021-12-16 9:01 ` Christoph Hellwig
2021-12-16 12:17 ` Max Gurtovoy
2021-12-15 16:24 ` Jens Axboe [this message]
2021-12-16 9:02 ` [PATCH 3/4] nvme: separate command prep and issue Christoph Hellwig
2021-12-15 16:24 ` [PATCH 4/4] nvme: add support for mq_ops->queue_rqs() Jens Axboe
2021-12-15 17:29 ` Keith Busch
2021-12-15 20:27 ` Jens Axboe
2021-12-16 9:08 ` Christoph Hellwig
2021-12-16 13:06 ` Max Gurtovoy
2021-12-16 15:48 ` Jens Axboe
2021-12-16 16:00 ` Max Gurtovoy
2021-12-16 16:05 ` Jens Axboe
2021-12-16 16:19 ` Max Gurtovoy
2021-12-16 16:25 ` Jens Axboe
2021-12-16 16:34 ` Max Gurtovoy
2021-12-16 16:36 ` Jens Axboe
2021-12-16 16:57 ` Max Gurtovoy
2021-12-16 17:16 ` Jens Axboe
2021-12-19 12:14 ` Max Gurtovoy
2021-12-19 14:48 ` Jens Axboe
2021-12-20 10:11 ` Max Gurtovoy
2021-12-20 14:19 ` Jens Axboe
2021-12-20 14:25 ` Jens Axboe
2021-12-20 15:29 ` Max Gurtovoy
2021-12-20 16:34 ` Jens Axboe
2021-12-20 18:48 ` Max Gurtovoy
2021-12-20 18:58 ` Jens Axboe
2021-12-21 10:20 ` Max Gurtovoy
2021-12-21 15:23 ` Jens Axboe
2021-12-21 15:29 ` Max Gurtovoy
2021-12-21 15:33 ` Jens Axboe
2021-12-21 16:08 ` Max Gurtovoy
2021-12-16 15:45 ` Jens Axboe
2021-12-16 16:15 ` Christoph Hellwig
2021-12-16 16:27 ` Jens Axboe
2021-12-16 16:30 ` Christoph Hellwig
2021-12-16 16:36 ` Jens Axboe
2021-12-16 13:02 ` Max Gurtovoy
2021-12-16 15:59 ` Jens Axboe
2021-12-16 16:06 ` Max Gurtovoy
2021-12-16 16:09 ` Jens Axboe
-- strict thread matches above, loose matches on Subject: below --
2021-12-16 16:05 [PATCHSET v4 0/4] Add support for list issue Jens Axboe
2021-12-16 16:05 ` [PATCH 3/4] nvme: separate command prep and issue Jens Axboe
2021-12-16 16:38 [PATCHSET v5 0/4] Add support for list issue Jens Axboe
2021-12-16 16:39 ` [PATCH 3/4] nvme: separate command prep and issue Jens Axboe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox