From: Stefan Roesch <[email protected]>
To: <[email protected]>, <[email protected]>,
<[email protected]>
Cc: <[email protected]>, <[email protected]>, Jens Axboe <[email protected]>
Subject: [PATCH v3 12/12] io_uring: support CQE32 for nop operation
Date: Mon, 25 Apr 2022 11:25:30 -0700 [thread overview]
Message-ID: <[email protected]> (raw)
In-Reply-To: <[email protected]>
This adds support for filling the extra1 and extra2 fields for large
CQE's.
Co-developed-by: Jens Axboe <[email protected]>
Signed-off-by: Stefan Roesch <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
---
fs/io_uring.c | 28 ++++++++++++++++++++++++++--
1 file changed, 26 insertions(+), 2 deletions(-)
diff --git a/fs/io_uring.c b/fs/io_uring.c
index caeddcf8a61c..9e1fb8be9687 100644
--- a/fs/io_uring.c
+++ b/fs/io_uring.c
@@ -744,6 +744,12 @@ struct io_msg {
u32 len;
};
+struct io_nop {
+ struct file *file;
+ u64 extra1;
+ u64 extra2;
+};
+
struct io_async_connect {
struct sockaddr_storage address;
};
@@ -937,6 +943,7 @@ struct io_kiocb {
struct io_msg msg;
struct io_xattr xattr;
struct io_socket sock;
+ struct io_nop nop;
};
u8 opcode;
@@ -4872,6 +4879,19 @@ static int io_splice(struct io_kiocb *req, unsigned int issue_flags)
return 0;
}
+static int io_nop_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe)
+{
+ /*
+ * If the ring is setup with CQE32, relay back addr/addr
+ */
+ if (req->ctx->flags & IORING_SETUP_CQE32) {
+ req->nop.extra1 = READ_ONCE(sqe->addr);
+ req->nop.extra2 = READ_ONCE(sqe->addr2);
+ }
+
+ return 0;
+}
+
/*
* IORING_OP_NOP just posts a completion event, nothing else.
*/
@@ -4882,7 +4902,11 @@ static int io_nop(struct io_kiocb *req, unsigned int issue_flags)
if (unlikely(ctx->flags & IORING_SETUP_IOPOLL))
return -EINVAL;
- __io_req_complete(req, issue_flags, 0, 0);
+ if (!(ctx->flags & IORING_SETUP_CQE32))
+ __io_req_complete(req, issue_flags, 0, 0);
+ else
+ __io_req_complete32(req, issue_flags, 0, 0, req->nop.extra1,
+ req->nop.extra2);
return 0;
}
@@ -7354,7 +7378,7 @@ static int io_req_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe)
{
switch (req->opcode) {
case IORING_OP_NOP:
- return 0;
+ return io_nop_prep(req, sqe);
case IORING_OP_READV:
case IORING_OP_READ_FIXED:
case IORING_OP_READ:
--
2.30.2
next prev parent reply other threads:[~2022-04-25 18:26 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20220425182557epcas5p2e1b72edf0fcc4c21b2b96a32910a2736@epcas5p2.samsung.com>
2022-04-25 18:25 ` [PATCH v3 00/12] add large CQE support for io-uring Stefan Roesch
2022-04-25 18:25 ` [PATCH v3 01/12] io_uring: support CQE32 in io_uring_cqe Stefan Roesch
2022-04-26 5:22 ` Kanchan Joshi
2022-04-25 18:25 ` [PATCH v3 02/12] io_uring: wire up inline completion path for CQE32 Stefan Roesch
2022-04-26 5:45 ` Kanchan Joshi
2022-04-25 18:25 ` [PATCH v3 03/12] io_uring: change ring size calculation " Stefan Roesch
2022-04-25 18:25 ` [PATCH v3 04/12] io_uring: add CQE32 setup processing Stefan Roesch
2022-04-25 18:25 ` [PATCH v3 05/12] io_uring: add CQE32 completion processing Stefan Roesch
2022-04-25 18:25 ` [PATCH v3 06/12] io_uring: modify io_get_cqe for CQE32 Stefan Roesch
2022-04-25 18:25 ` [PATCH v3 07/12] io_uring: flush completions " Stefan Roesch
2022-04-25 18:25 ` [PATCH v3 08/12] io_uring: overflow processing " Stefan Roesch
2022-04-26 6:28 ` Kanchan Joshi
2022-04-26 12:53 ` Jens Axboe
2022-04-25 18:25 ` [PATCH v3 09/12] io_uring: add tracing for additional CQE32 fields Stefan Roesch
2022-04-25 18:25 ` [PATCH v3 10/12] io_uring: support CQE32 in /proc info Stefan Roesch
2022-04-25 18:25 ` [PATCH v3 11/12] io_uring: enable CQE32 Stefan Roesch
2022-04-25 18:25 ` Stefan Roesch [this message]
2022-04-25 18:38 ` [PATCH v3 00/12] add large CQE support for io-uring Jens Axboe
2022-04-26 11:37 ` Kanchan Joshi
2022-04-26 12:54 ` Jens Axboe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox