[PATCH for-next v11 00/13] Fixed-buffer for uring-cmd/passthru

[PATCH for-next v11 00/13] Fixed-buffer for uring-cmd/passthru

[Anuj Gupta]

Hi

uring-cmd lacks the ability to leverage the pre-registered buffers.
This series adds that support in uring-cmd, and plumbs nvme passthrough
to work with it.
Patch 3 and 4 contains a bunch of general nvme cleanups, which got added
along the iterations.
Patches 11, 12 and 13 carve out a block helper and scsi/nvme then use it to
avoid duplication of code.

Using registered-buffers showed IOPS hike from 1.65M to 2.04M.
Without fixedbufs
*****************
# taskset -c 0 t/io_uring -b512 -d128 -c32 -s32 -p1 -F1 -B0 -O0 -n1 -u1 /dev/ng0n1
submitter=0, tid=2481, file=/dev/ng0n1, node=-1
polled=1, fixedbufs=0/0, register_files=1, buffered=1, QD=128
Engine=io_uring, sq_ring=128, cq_ring=128
IOPS=2.60M, BW=1271MiB/s, IOS/call=32/31
IOPS=2.60M, BW=1271MiB/s, IOS/call=32/32
IOPS=2.61M, BW=1272MiB/s, IOS/call=32/32
IOPS=2.59M, BW=1266MiB/s, IOS/call=32/32
^CExiting on signal
Maximum IOPS=2.61M

With fixedbufs
**************
# taskset -c 0 t/io_uring -b512 -d128 -c32 -s32 -p1 -F1 -B1 -O0 -n1 -u1 /dev/ng0n1
submitter=0, tid=2487, file=/dev/ng0n1, node=-1
polled=1, fixedbufs=1/0, register_files=1, buffered=1, QD=128
Engine=io_uring, sq_ring=128, cq_ring=128
IOPS=3.15M, BW=1540MiB/s, IOS/call=32/31
IOPS=3.15M, BW=1538MiB/s, IOS/call=32/32
IOPS=3.15M, BW=1536MiB/s, IOS/call=32/32
IOPS=3.15M, BW=1537MiB/s, IOS/call=32/32
^CExiting on signal
Maximum IOPS=3.15M

Changes since v10:
- Patch 3: Fix overly long line (Christoph)
- Patch 4: create a helper in block-map for vectored and non-vectored-io,
to be used by scsi and nvme (Christoph)
- Patch 5: Rename bio_map_get to blk_rq_map_bio_alloc and bio_map_put to
blk_mq_map_bio_put (Christoph)
- Patch 6: Split it into a prep patch and avoid duplicate checks (Christoph)
- Patch 7: Put changes to pass ubuffer as a integer in a separate prep patch and
simplify condition checks in nvme (Christoph)

Changes since v9:
- Patch 6: Make blk_rq_map_user_iov() to operate on bvec iterator
  (Christoph)
- Patch 7: Change nvme to use the above

Changes since v8:
- Split some patches further; now 7 patches rather than 5 (Christoph)
- Applied a bunch of other suggested cleanups (Christoph)

Changes since v7:
- Patch 3: added many cleanups/refactoring suggested by Christoph
- Patch 4: added copying-pages fallback for bounce-buffer/dma-alignment case
  (Christoph)

Changes since v6:
- Patch 1: fix warning for io_uring_cmd_import_fixed (robot)
-
Changes since v5:
- Patch 4: newly addd, to split a nvme function into two
- Patch 3: folded cleanups in bio_map_user_iov (Chaitanya, Pankaj)
- Rebase to latest for-next

Changes since v4:
- Patch 1, 2: folded all review comments of Jens

Changes since v3:
- uring_cmd_flags, change from u16 to u32 (Jens)
- patch 3, add another helper to reduce code-duplication (Jens)

Changes since v2:
- Kill the new opcode, add a flag instead (Pavel)
- Fix standalone build issue with patch 1 (Pavel)

Changes since v1:
- Fix a naming issue for an exported helper

Anuj Gupta (6):
  io_uring: add io_uring_cmd_import_fixed
  io_uring: introduce fixed buffer support for io_uring_cmd
  block: rename bio_map_put to blk_mq_map_bio_put
  block: add blk_rq_map_user_io
  scsi: Use blk_rq_map_user_io helper
  nvme: Use blk_rq_map_user_io helper

Kanchan Joshi (7):
  nvme: refactor nvme_add_user_metadata
  nvme: refactor nvme_alloc_request
  block: factor out blk_rq_map_bio_alloc helper
  block: add blk_rq_map_user_bvec
  block: extend functionality to map bvec iterator
  nvme: pass ubuffer as an integer
  nvme: wire up fixed buffer support for nvme passthrough

 block/blk-map.c               | 150 ++++++++++++++++++++++++++++++----
 drivers/nvme/host/ioctl.c     | 149 +++++++++++++++++++--------------
 drivers/scsi/scsi_ioctl.c     |  22 +----
 drivers/scsi/sg.c             |  22 +----
 include/linux/blk-mq.h        |   2 +
 include/linux/io_uring.h      |  10 ++-
 include/uapi/linux/io_uring.h |   9 ++
 io_uring/uring_cmd.c          |  26 +++++-
 8 files changed, 268 insertions(+), 122 deletions(-)

-- 
2.25.1

[PATCH for-next v11 01/13] io_uring: add io_uring_cmd_import_fixed

[Anuj Gupta]

This is a new helper that callers can use to obtain a bvec iterator for
the previously mapped buffer. This is preparatory work to enable
fixed-buffer support for io_uring_cmd.

Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
---
 include/linux/io_uring.h |  8 ++++++++
 io_uring/uring_cmd.c     | 10 ++++++++++
 2 files changed, 18 insertions(+)

diff --git a/include/linux/io_uring.h b/include/linux/io_uring.h
index 58676c0a398f..1dbf51115c30 100644
--- a/include/linux/io_uring.h
+++ b/include/linux/io_uring.h
@@ -4,6 +4,7 @@
 
 #include <linux/sched.h>
 #include <linux/xarray.h>
+#include <uapi/linux/io_uring.h>
 
 enum io_uring_cmd_flags {
 	IO_URING_F_COMPLETE_DEFER	= 1,
@@ -32,6 +33,8 @@ struct io_uring_cmd {
 };
 
 #if defined(CONFIG_IO_URING)
+int io_uring_cmd_import_fixed(u64 ubuf, unsigned long len, int rw,
+			      struct iov_iter *iter, void *ioucmd);
 void io_uring_cmd_done(struct io_uring_cmd *cmd, ssize_t ret, ssize_t res2);
 void io_uring_cmd_complete_in_task(struct io_uring_cmd *ioucmd,
 			void (*task_work_cb)(struct io_uring_cmd *));
@@ -59,6 +62,11 @@ static inline void io_uring_free(struct task_struct *tsk)
 		__io_uring_free(tsk);
 }
 #else
+static int io_uring_cmd_import_fixed(u64 ubuf, unsigned long len, int rw,
+			      struct iov_iter *iter, void *ioucmd)
+{
+	return -EOPNOTSUPP;
+}
 static inline void io_uring_cmd_done(struct io_uring_cmd *cmd, ssize_t ret,
 		ssize_t ret2)
 {
diff --git a/io_uring/uring_cmd.c b/io_uring/uring_cmd.c
index f3ed61e9bd0f..6a6d69523d75 100644
--- a/io_uring/uring_cmd.c
+++ b/io_uring/uring_cmd.c
@@ -8,6 +8,7 @@
 #include <uapi/linux/io_uring.h>
 
 #include "io_uring.h"
+#include "rsrc.h"
 #include "uring_cmd.h"
 
 static void io_uring_cmd_work(struct io_kiocb *req, bool *locked)
@@ -129,3 +130,12 @@ int io_uring_cmd(struct io_kiocb *req, unsigned int issue_flags)
 
 	return IOU_ISSUE_SKIP_COMPLETE;
 }
+
+int io_uring_cmd_import_fixed(u64 ubuf, unsigned long len, int rw,
+			      struct iov_iter *iter, void *ioucmd)
+{
+	struct io_kiocb *req = cmd_to_io_kiocb(ioucmd);
+
+	return io_import_fixed(rw, iter, req->imu, ubuf, len);
+}
+EXPORT_SYMBOL_GPL(io_uring_cmd_import_fixed);
-- 
2.25.1

[PATCH for-next v11 02/13] io_uring: introduce fixed buffer support for io_uring_cmd

[Anuj Gupta]

Add IORING_URING_CMD_FIXED flag that is to be used for sending io_uring
command with previously registered buffers. User-space passes the buffer
index in sqe->buf_index, same as done in read/write variants that uses
fixed buffers.

Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
---
 include/linux/io_uring.h      |  2 +-
 include/uapi/linux/io_uring.h |  9 +++++++++
 io_uring/uring_cmd.c          | 16 +++++++++++++++-
 3 files changed, 25 insertions(+), 2 deletions(-)

diff --git a/include/linux/io_uring.h b/include/linux/io_uring.h
index 1dbf51115c30..e10c5cc81082 100644
--- a/include/linux/io_uring.h
+++ b/include/linux/io_uring.h
@@ -28,7 +28,7 @@ struct io_uring_cmd {
 		void *cookie;
 	};
 	u32		cmd_op;
-	u32		pad;
+	u32		flags;
 	u8		pdu[32]; /* available inline for free use */
 };
 
diff --git a/include/uapi/linux/io_uring.h b/include/uapi/linux/io_uring.h
index 92f29d9505a6..ab7458033ee3 100644
--- a/include/uapi/linux/io_uring.h
+++ b/include/uapi/linux/io_uring.h
@@ -56,6 +56,7 @@ struct io_uring_sqe {
 		__u32		hardlink_flags;
 		__u32		xattr_flags;
 		__u32		msg_ring_flags;
+		__u32		uring_cmd_flags;
 	};
 	__u64	user_data;	/* data to be passed back at completion time */
 	/* pack this to avoid bogus arm OABI complaints */
@@ -219,6 +220,14 @@ enum io_uring_op {
 	IORING_OP_LAST,
 };
 
+/*
+ * sqe->uring_cmd_flags
+ * IORING_URING_CMD_FIXED	use registered buffer; pass thig flag
+ *				along with setting sqe->buf_index.
+ */
+#define IORING_URING_CMD_FIXED	(1U << 0)
+
+
 /*
  * sqe->fsync_flags
  */
diff --git a/io_uring/uring_cmd.c b/io_uring/uring_cmd.c
index 6a6d69523d75..faefa9f6f259 100644
--- a/io_uring/uring_cmd.c
+++ b/io_uring/uring_cmd.c
@@ -4,6 +4,7 @@
 #include <linux/file.h>
 #include <linux/io_uring.h>
 #include <linux/security.h>
+#include <linux/nospec.h>
 
 #include <uapi/linux/io_uring.h>
 
@@ -77,8 +78,21 @@ int io_uring_cmd_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe)
 {
 	struct io_uring_cmd *ioucmd = io_kiocb_to_cmd(req, struct io_uring_cmd);
 
-	if (sqe->rw_flags || sqe->__pad1)
+	if (sqe->__pad1)
 		return -EINVAL;
+
+	ioucmd->flags = READ_ONCE(sqe->uring_cmd_flags);
+	if (ioucmd->flags & IORING_URING_CMD_FIXED) {
+		struct io_ring_ctx *ctx = req->ctx;
+		u16 index;
+
+		req->buf_index = READ_ONCE(sqe->buf_index);
+		if (unlikely(req->buf_index >= ctx->nr_user_bufs))
+			return -EFAULT;
+		index = array_index_nospec(req->buf_index, ctx->nr_user_bufs);
+		req->imu = ctx->user_bufs[index];
+		io_req_set_rsrc_node(req, ctx, 0);
+	}
 	ioucmd->cmd = sqe->cmd;
 	ioucmd->cmd_op = READ_ONCE(sqe->cmd_op);
 	return 0;
-- 
2.25.1

[PATCH for-next v11 03/13] nvme: refactor nvme_add_user_metadata

[Anuj Gupta]

From: Kanchan Joshi <joshi.k@samsung.com>

Pass struct request rather than bio. It helps to kill a parameter, and
some processing clean-up too.

Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
---
 drivers/nvme/host/ioctl.c | 23 +++++++++++++----------
 1 file changed, 13 insertions(+), 10 deletions(-)

diff --git a/drivers/nvme/host/ioctl.c b/drivers/nvme/host/ioctl.c
index 914b142b6f2b..749f588a1228 100644
--- a/drivers/nvme/host/ioctl.c
+++ b/drivers/nvme/host/ioctl.c
@@ -20,19 +20,20 @@ static void __user *nvme_to_user_ptr(uintptr_t ptrval)
 	return (void __user *)ptrval;
 }
 
-static void *nvme_add_user_metadata(struct bio *bio, void __user *ubuf,
-		unsigned len, u32 seed, bool write)
+static void *nvme_add_user_metadata(struct request *req, void __user *ubuf,
+		unsigned len, u32 seed)
 {
 	struct bio_integrity_payload *bip;
 	int ret = -ENOMEM;
 	void *buf;
+	struct bio *bio = req->bio;
 
 	buf = kmalloc(len, GFP_KERNEL);
 	if (!buf)
 		goto out;
 
 	ret = -EFAULT;
-	if (write && copy_from_user(buf, ubuf, len))
+	if ((req_op(req) == REQ_OP_DRV_OUT) && copy_from_user(buf, ubuf, len))
 		goto out_free_meta;
 
 	bip = bio_integrity_alloc(bio, GFP_KERNEL, 1);
@@ -45,9 +46,13 @@ static void *nvme_add_user_metadata(struct bio *bio, void __user *ubuf,
 	bip->bip_iter.bi_sector = seed;
 	ret = bio_integrity_add_page(bio, virt_to_page(buf), len,
 			offset_in_page(buf));
-	if (ret == len)
-		return buf;
-	ret = -ENOMEM;
+	if (ret != len) {
+		ret = -ENOMEM;
+		goto out_free_meta;
+	}
+
+	req->cmd_flags |= REQ_INTEGRITY;
+	return buf;
 out_free_meta:
 	kfree(buf);
 out:
@@ -70,7 +75,6 @@ static struct request *nvme_alloc_user_request(struct request_queue *q,
 		u32 meta_seed, void **metap, unsigned timeout, bool vec,
 		blk_opf_t rq_flags, blk_mq_req_flags_t blk_flags)
 {
-	bool write = nvme_is_write(cmd);
 	struct nvme_ns *ns = q->queuedata;
 	struct block_device *bdev = ns ? ns->disk->part0 : NULL;
 	struct request *req;
@@ -110,13 +114,12 @@ static struct request *nvme_alloc_user_request(struct request_queue *q,
 		if (bdev)
 			bio_set_dev(bio, bdev);
 		if (bdev && meta_buffer && meta_len) {
-			meta = nvme_add_user_metadata(bio, meta_buffer, meta_len,
-					meta_seed, write);
+			meta = nvme_add_user_metadata(req, meta_buffer,
+					meta_len, meta_seed);
 			if (IS_ERR(meta)) {
 				ret = PTR_ERR(meta);
 				goto out_unmap;
 			}
-			req->cmd_flags |= REQ_INTEGRITY;
 			*metap = meta;
 		}
 	}
-- 
2.25.1

[PATCH for-next v11 04/13] nvme: refactor nvme_alloc_request

[Anuj Gupta]

From: Kanchan Joshi <joshi.k@samsung.com>

nvme_alloc_request expects a large number of parameters.
Split this out into two functions to reduce number of parameters.
First one retains the name nvme_alloc_request, while second one is
named nvme_map_user_request.

Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
---
 drivers/nvme/host/ioctl.c | 120 ++++++++++++++++++++++----------------
 1 file changed, 69 insertions(+), 51 deletions(-)

diff --git a/drivers/nvme/host/ioctl.c b/drivers/nvme/host/ioctl.c
index 749f588a1228..0143f62b27c2 100644
--- a/drivers/nvme/host/ioctl.c
+++ b/drivers/nvme/host/ioctl.c
@@ -70,68 +70,69 @@ static int nvme_finish_user_metadata(struct request *req, void __user *ubuf,
 }
 
 static struct request *nvme_alloc_user_request(struct request_queue *q,
-		struct nvme_command *cmd, void __user *ubuffer,
-		unsigned bufflen, void __user *meta_buffer, unsigned meta_len,
-		u32 meta_seed, void **metap, unsigned timeout, bool vec,
-		blk_opf_t rq_flags, blk_mq_req_flags_t blk_flags)
+		struct nvme_command *cmd, blk_opf_t rq_flags,
+		blk_mq_req_flags_t blk_flags)
 {
-	struct nvme_ns *ns = q->queuedata;
-	struct block_device *bdev = ns ? ns->disk->part0 : NULL;
 	struct request *req;
-	struct bio *bio = NULL;
-	void *meta = NULL;
-	int ret;
 
 	req = blk_mq_alloc_request(q, nvme_req_op(cmd) | rq_flags, blk_flags);
 	if (IS_ERR(req))
 		return req;
 	nvme_init_request(req, cmd);
-
-	if (timeout)
-		req->timeout = timeout;
 	nvme_req(req)->flags |= NVME_REQ_USERCMD;
+	return req;
+}
 
-	if (ubuffer && bufflen) {
-		if (!vec)
-			ret = blk_rq_map_user(q, req, NULL, ubuffer, bufflen,
-				GFP_KERNEL);
-		else {
-			struct iovec fast_iov[UIO_FASTIOV];
-			struct iovec *iov = fast_iov;
-			struct iov_iter iter;
-
-			ret = import_iovec(rq_data_dir(req), ubuffer, bufflen,
-					UIO_FASTIOV, &iov, &iter);
-			if (ret < 0)
-				goto out;
-			ret = blk_rq_map_user_iov(q, req, NULL, &iter,
-					GFP_KERNEL);
-			kfree(iov);
-		}
-		if (ret)
+static int nvme_map_user_request(struct request *req, void __user *ubuffer,
+		unsigned bufflen, void __user *meta_buffer, unsigned meta_len,
+		u32 meta_seed, void **metap, bool vec)
+{
+	struct request_queue *q = req->q;
+	struct nvme_ns *ns = q->queuedata;
+	struct block_device *bdev = ns ? ns->disk->part0 : NULL;
+	struct bio *bio = NULL;
+	void *meta = NULL;
+	int ret;
+
+	if (!vec)
+		ret = blk_rq_map_user(q, req, NULL, ubuffer, bufflen,
+			GFP_KERNEL);
+	else {
+		struct iovec fast_iov[UIO_FASTIOV];
+		struct iovec *iov = fast_iov;
+		struct iov_iter iter;
+
+		ret = import_iovec(rq_data_dir(req), ubuffer, bufflen,
+				UIO_FASTIOV, &iov, &iter);
+		if (ret < 0)
 			goto out;
-		bio = req->bio;
-		if (bdev)
-			bio_set_dev(bio, bdev);
-		if (bdev && meta_buffer && meta_len) {
-			meta = nvme_add_user_metadata(req, meta_buffer,
-					meta_len, meta_seed);
-			if (IS_ERR(meta)) {
-				ret = PTR_ERR(meta);
-				goto out_unmap;
-			}
-			*metap = meta;
+
+		ret = blk_rq_map_user_iov(q, req, NULL, &iter, GFP_KERNEL);
+		kfree(iov);
+	}
+	if (ret)
+		goto out;
+	bio = req->bio;
+	if (bdev)
+		bio_set_dev(bio, bdev);
+
+	if (bdev && meta_buffer && meta_len) {
+		meta = nvme_add_user_metadata(req, meta_buffer, meta_len,
+				meta_seed);
+		if (IS_ERR(meta)) {
+			ret = PTR_ERR(meta);
+			goto out_unmap;
 		}
+		*metap = meta;
 	}
 
-	return req;
+	return ret;
 
 out_unmap:
 	if (bio)
 		blk_rq_unmap_user(bio);
 out:
-	blk_mq_free_request(req);
-	return ERR_PTR(ret);
+	return ret;
 }
 
 static int nvme_submit_user_cmd(struct request_queue *q,
@@ -146,11 +147,18 @@ static int nvme_submit_user_cmd(struct request_queue *q,
 	u32 effects;
 	int ret;
 
-	req = nvme_alloc_user_request(q, cmd, ubuffer, bufflen, meta_buffer,
-			meta_len, meta_seed, &meta, timeout, vec, 0, 0);
+	req = nvme_alloc_user_request(q, cmd, 0, 0);
 	if (IS_ERR(req))
 		return PTR_ERR(req);
 
+	req->timeout = timeout;
+	if (ubuffer && bufflen) {
+		ret = nvme_map_user_request(req, ubuffer, bufflen, meta_buffer,
+				meta_len, meta_seed, &meta, vec);
+		if (ret)
+			goto out;
+	}
+
 	bio = req->bio;
 	ctrl = nvme_req(req)->ctrl;
 
@@ -163,6 +171,7 @@ static int nvme_submit_user_cmd(struct request_queue *q,
 						meta_len, ret);
 	if (bio)
 		blk_rq_unmap_user(bio);
+out:
 	blk_mq_free_request(req);
 
 	if (effects)
@@ -470,6 +479,7 @@ static int nvme_uring_cmd_io(struct nvme_ctrl *ctrl, struct nvme_ns *ns,
 	blk_opf_t rq_flags = 0;
 	blk_mq_req_flags_t blk_flags = 0;
 	void *meta = NULL;
+	int ret;
 
 	if (!capable(CAP_SYS_ADMIN))
 		return -EACCES;
@@ -509,13 +519,18 @@ static int nvme_uring_cmd_io(struct nvme_ctrl *ctrl, struct nvme_ns *ns,
 		rq_flags |= REQ_POLLED;
 
 retry:
-	req = nvme_alloc_user_request(q, &c, nvme_to_user_ptr(d.addr),
-			d.data_len, nvme_to_user_ptr(d.metadata),
-			d.metadata_len, 0, &meta, d.timeout_ms ?
-			msecs_to_jiffies(d.timeout_ms) : 0, vec, rq_flags,
-			blk_flags);
+	req = nvme_alloc_user_request(q, &c, rq_flags, blk_flags);
 	if (IS_ERR(req))
 		return PTR_ERR(req);
+	req->timeout = d.timeout_ms ? msecs_to_jiffies(d.timeout_ms) : 0;
+
+	if (d.addr && d.data_len) {
+		ret = nvme_map_user_request(req, nvme_to_user_ptr(d.addr),
+			d.data_len, nvme_to_user_ptr(d.metadata),
+			d.metadata_len, 0, &meta, vec);
+		if (ret)
+			goto out_err;
+	}
 
 	if (issue_flags & IO_URING_F_IOPOLL && rq_flags & REQ_POLLED) {
 		if (unlikely(!req->bio)) {
@@ -541,6 +556,9 @@ static int nvme_uring_cmd_io(struct nvme_ctrl *ctrl, struct nvme_ns *ns,
 	}
 	blk_execute_rq_nowait(req, false);
 	return -EIOCBQUEUED;
+out_err:
+	blk_mq_free_request(req);
+	return ret;
 }
 
 static bool is_ctrl_ioctl(unsigned int cmd)
-- 
2.25.1

[PATCH for-next v11 05/13] block: rename bio_map_put to blk_mq_map_bio_put

[Anuj Gupta]

This patch renames existing bio_map_put function to blk_mq_map_bio_put.

Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Suggested-by: Christoph Hellwig <hch@lst.de>
---
 block/blk-map.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/block/blk-map.c b/block/blk-map.c
index 7693f8e3c454..d913ef92a9fe 100644
--- a/block/blk-map.c
+++ b/block/blk-map.c
@@ -231,7 +231,7 @@ static int bio_copy_user_iov(struct request *rq, struct rq_map_data *map_data,
 	return ret;
 }
 
-static void bio_map_put(struct bio *bio)
+static void blk_mq_map_bio_put(struct bio *bio)
 {
 	if (bio->bi_opf & REQ_ALLOC_CACHE) {
 		bio_put(bio);
@@ -331,7 +331,7 @@ static int bio_map_user_iov(struct request *rq, struct iov_iter *iter,
 
  out_unmap:
 	bio_release_pages(bio, false);
-	bio_map_put(bio);
+	blk_mq_map_bio_put(bio);
 	return ret;
 }
 
@@ -636,7 +636,7 @@ int blk_rq_unmap_user(struct bio *bio)
 
 		next_bio = bio;
 		bio = bio->bi_next;
-		bio_map_put(next_bio);
+		blk_mq_map_bio_put(next_bio);
 	}
 
 	return ret;
-- 
2.25.1

[PATCH for-next v11 06/13] block: factor out blk_rq_map_bio_alloc helper

[Anuj Gupta]

From: Kanchan Joshi <joshi.k@samsung.com>

Move bio allocation logic from bio_map_user_iov to a new helper
blk_rq_map_bio_alloc. It is named so because functionality is opposite
of what is done inside blk_mq_map_bio_put. This is a prep patch.

Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
---
 block/blk-map.c | 33 ++++++++++++++++++++++-----------
 1 file changed, 22 insertions(+), 11 deletions(-)

diff --git a/block/blk-map.c b/block/blk-map.c
index d913ef92a9fe..9e37a03b8a21 100644
--- a/block/blk-map.c
+++ b/block/blk-map.c
@@ -241,17 +241,10 @@ static void blk_mq_map_bio_put(struct bio *bio)
 	}
 }
 
-static int bio_map_user_iov(struct request *rq, struct iov_iter *iter,
-		gfp_t gfp_mask)
+static struct bio *blk_rq_map_bio_alloc(struct request *rq,
+		unsigned int nr_vecs, gfp_t gfp_mask)
 {
-	unsigned int max_sectors = queue_max_hw_sectors(rq->q);
-	unsigned int nr_vecs = iov_iter_npages(iter, BIO_MAX_VECS);
 	struct bio *bio;
-	int ret;
-	int j;
-
-	if (!iov_iter_count(iter))
-		return -EINVAL;
 
 	if (rq->cmd_flags & REQ_POLLED) {
 		blk_opf_t opf = rq->cmd_flags | REQ_ALLOC_CACHE;
@@ -259,13 +252,31 @@ static int bio_map_user_iov(struct request *rq, struct iov_iter *iter,
 		bio = bio_alloc_bioset(NULL, nr_vecs, opf, gfp_mask,
 					&fs_bio_set);
 		if (!bio)
-			return -ENOMEM;
+			return NULL;
 	} else {
 		bio = bio_kmalloc(nr_vecs, gfp_mask);
 		if (!bio)
-			return -ENOMEM;
+			return NULL;
 		bio_init(bio, NULL, bio->bi_inline_vecs, nr_vecs, req_op(rq));
 	}
+	return bio;
+}
+
+static int bio_map_user_iov(struct request *rq, struct iov_iter *iter,
+		gfp_t gfp_mask)
+{
+	unsigned int max_sectors = queue_max_hw_sectors(rq->q);
+	unsigned int nr_vecs = iov_iter_npages(iter, BIO_MAX_VECS);
+	struct bio *bio;
+	int ret;
+	int j;
+
+	if (!iov_iter_count(iter))
+		return -EINVAL;
+
+	bio = blk_rq_map_bio_alloc(rq, nr_vecs, gfp_mask);
+	if (bio == NULL)
+		return -ENOMEM;
 
 	while (iov_iter_count(iter)) {
 		struct page **pages, *stack_pages[UIO_FASTIOV];
-- 
2.25.1

[PATCH for-next v11 07/13] block: add blk_rq_map_user_bvec

[Anuj Gupta]

From: Kanchan Joshi <joshi.k@samsung.com>

This is a prep patch. This function maps the pages from bvec iterator into
a bio and place the bio into request.

This helper will be used by nvme for uring-passthrough path when IO is
done using pre-mapped buffers.

Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Suggested-by: Christoph Hellwig <hch@lst.de>
---
 block/blk-map.c | 56 +++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 56 insertions(+)

diff --git a/block/blk-map.c b/block/blk-map.c
index 9e37a03b8a21..023b63ad06d8 100644
--- a/block/blk-map.c
+++ b/block/blk-map.c
@@ -548,6 +548,62 @@ int blk_rq_append_bio(struct request *rq, struct bio *bio)
 }
 EXPORT_SYMBOL(blk_rq_append_bio);
 
+/* Prepare bio for passthrough IO given ITER_BVEC iter */
+static int blk_rq_map_user_bvec(struct request *rq, const struct iov_iter *iter)
+{
+	struct request_queue *q = rq->q;
+	size_t nr_iter = iov_iter_count(iter);
+	size_t nr_segs = iter->nr_segs;
+	struct bio_vec *bvecs, *bvprvp = NULL;
+	struct queue_limits *lim = &q->limits;
+	unsigned int nsegs = 0, bytes = 0;
+	struct bio *bio;
+	size_t i;
+
+	if (!nr_iter || (nr_iter >> SECTOR_SHIFT) > queue_max_hw_sectors(q))
+		return -EINVAL;
+	if (nr_segs > queue_max_segments(q))
+		return -EINVAL;
+
+	/* no iovecs to alloc, as we already have a BVEC iterator */
+	bio = blk_rq_map_bio_alloc(rq, 0, GFP_KERNEL);
+	if (bio == NULL)
+		return -ENOMEM;
+
+	bio_iov_bvec_set(bio, (struct iov_iter *)iter);
+	blk_rq_bio_prep(rq, bio, nr_segs);
+
+	/* loop to perform a bunch of sanity checks */
+	bvecs = (struct bio_vec *)iter->bvec;
+	for (i = 0; i < nr_segs; i++) {
+		struct bio_vec *bv = &bvecs[i];
+
+		/*
+		 * If the queue doesn't support SG gaps and adding this
+		 * offset would create a gap, fallback to copy.
+		 */
+		if (bvprvp && bvec_gap_to_prev(lim, bvprvp, bv->bv_offset)) {
+			blk_mq_map_bio_put(bio);
+			return -EREMOTEIO;
+		}
+		/* check full condition */
+		if (nsegs >= nr_segs || bytes > UINT_MAX - bv->bv_len)
+			goto put_bio;
+		if (bytes + bv->bv_len > nr_iter)
+			goto put_bio;
+		if (bv->bv_offset + bv->bv_len > PAGE_SIZE)
+			goto put_bio;
+
+		nsegs++;
+		bytes += bv->bv_len;
+		bvprvp = bv;
+	}
+	return 0;
+put_bio:
+	blk_mq_map_bio_put(bio);
+	return -EINVAL;
+}
+
 /**
  * blk_rq_map_user_iov - map user data to a request, for passthrough requests
  * @q:		request queue where request should be inserted
-- 
2.25.1

[PATCH for-next v11 08/13] block: extend functionality to map bvec iterator

[Anuj Gupta]

From: Kanchan Joshi <joshi.k@samsung.com>

Extend blk_rq_map_user_iov so that it can handle bvec iterator, using
the new blk_rq_map_user_bvec function.

Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Suggested-by: Christoph Hellwig <hch@lst.de>
---
 block/blk-map.c | 19 +++++++++++++++----
 1 file changed, 15 insertions(+), 4 deletions(-)

diff --git a/block/blk-map.c b/block/blk-map.c
index 023b63ad06d8..ffab5d2d8d6d 100644
--- a/block/blk-map.c
+++ b/block/blk-map.c
@@ -623,24 +623,35 @@ int blk_rq_map_user_iov(struct request_queue *q, struct request *rq,
 			struct rq_map_data *map_data,
 			const struct iov_iter *iter, gfp_t gfp_mask)
 {
-	bool copy = false;
+	bool copy = false, map_bvec = false;
 	unsigned long align = q->dma_pad_mask | queue_dma_alignment(q);
 	struct bio *bio = NULL;
 	struct iov_iter i;
 	int ret = -EINVAL;
 
-	if (!iter_is_iovec(iter))
-		goto fail;
-
 	if (map_data)
 		copy = true;
 	else if (blk_queue_may_bounce(q))
 		copy = true;
 	else if (iov_iter_alignment(iter) & align)
 		copy = true;
+	else if (iov_iter_is_bvec(iter))
+		map_bvec = true;
+	else if (!iter_is_iovec(iter))
+		copy = true;
 	else if (queue_virt_boundary(q))
 		copy = queue_virt_boundary(q) & iov_iter_gap_alignment(iter);
 
+	if (map_bvec) {
+		ret = blk_rq_map_user_bvec(rq, iter);
+		if (!ret)
+			return 0;
+		if (ret != -EREMOTEIO)
+			goto fail;
+		/* fall back to copying the data on limits mismatches */
+		copy = true;
+	}
+
 	i = *iter;
 	do {
 		if (copy)
-- 
2.25.1

[PATCH for-next v11 09/13] nvme: pass ubuffer as an integer

[Anuj Gupta]

From: Kanchan Joshi <joshi.k@samsung.com>

This is a prep patch. Modify nvme_submit_user_cmd and
nvme_map_user_request to take ubuffer as plain integer
argument, and do away with nvme_to_user_ptr conversion in callers.

Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
---
 drivers/nvme/host/ioctl.c | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

diff --git a/drivers/nvme/host/ioctl.c b/drivers/nvme/host/ioctl.c
index 0143f62b27c2..4a7e45a263b6 100644
--- a/drivers/nvme/host/ioctl.c
+++ b/drivers/nvme/host/ioctl.c
@@ -83,9 +83,10 @@ static struct request *nvme_alloc_user_request(struct request_queue *q,
 	return req;
 }
 
-static int nvme_map_user_request(struct request *req, void __user *ubuffer,
+static int nvme_map_user_request(struct request *req, u64 ubuffer,
 		unsigned bufflen, void __user *meta_buffer, unsigned meta_len,
-		u32 meta_seed, void **metap, bool vec)
+		u32 meta_seed, void **metap, struct io_uring_cmd *ioucmd,
+		bool vec)
 {
 	struct request_queue *q = req->q;
 	struct nvme_ns *ns = q->queuedata;
@@ -136,7 +137,7 @@ static int nvme_map_user_request(struct request *req, void __user *ubuffer,
 }
 
 static int nvme_submit_user_cmd(struct request_queue *q,
-		struct nvme_command *cmd, void __user *ubuffer,
+		struct nvme_command *cmd, u64 ubuffer,
 		unsigned bufflen, void __user *meta_buffer, unsigned meta_len,
 		u32 meta_seed, u64 *result, unsigned timeout, bool vec)
 {
@@ -154,7 +155,7 @@ static int nvme_submit_user_cmd(struct request_queue *q,
 	req->timeout = timeout;
 	if (ubuffer && bufflen) {
 		ret = nvme_map_user_request(req, ubuffer, bufflen, meta_buffer,
-				meta_len, meta_seed, &meta, vec);
+				meta_len, meta_seed, &meta, NULL, vec);
 		if (ret)
 			goto out;
 	}
@@ -239,7 +240,7 @@ static int nvme_submit_io(struct nvme_ns *ns, struct nvme_user_io __user *uio)
 	c.rw.appmask = cpu_to_le16(io.appmask);
 
 	return nvme_submit_user_cmd(ns->queue, &c,
-			nvme_to_user_ptr(io.addr), length,
+			io.addr, length,
 			metadata, meta_len, lower_32_bits(io.slba), NULL, 0,
 			false);
 }
@@ -293,7 +294,7 @@ static int nvme_user_cmd(struct nvme_ctrl *ctrl, struct nvme_ns *ns,
 		timeout = msecs_to_jiffies(cmd.timeout_ms);
 
 	status = nvme_submit_user_cmd(ns ? ns->queue : ctrl->admin_q, &c,
-			nvme_to_user_ptr(cmd.addr), cmd.data_len,
+			cmd.addr, cmd.data_len,
 			nvme_to_user_ptr(cmd.metadata), cmd.metadata_len,
 			0, &result, timeout, false);
 
@@ -339,7 +340,7 @@ static int nvme_user_cmd64(struct nvme_ctrl *ctrl, struct nvme_ns *ns,
 		timeout = msecs_to_jiffies(cmd.timeout_ms);
 
 	status = nvme_submit_user_cmd(ns ? ns->queue : ctrl->admin_q, &c,
-			nvme_to_user_ptr(cmd.addr), cmd.data_len,
+			cmd.addr, cmd.data_len,
 			nvme_to_user_ptr(cmd.metadata), cmd.metadata_len,
 			0, &cmd.result, timeout, vec);
 
@@ -525,9 +526,9 @@ static int nvme_uring_cmd_io(struct nvme_ctrl *ctrl, struct nvme_ns *ns,
 	req->timeout = d.timeout_ms ? msecs_to_jiffies(d.timeout_ms) : 0;
 
 	if (d.addr && d.data_len) {
-		ret = nvme_map_user_request(req, nvme_to_user_ptr(d.addr),
+		ret = nvme_map_user_request(req, d.addr,
 			d.data_len, nvme_to_user_ptr(d.metadata),
-			d.metadata_len, 0, &meta, vec);
+			d.metadata_len, 0, &meta, ioucmd, vec);
 		if (ret)
 			goto out_err;
 	}
-- 
2.25.1

[PATCH for-next v11 10/13] nvme: wire up fixed buffer support for nvme passthrough

[Anuj Gupta]

From: Kanchan Joshi <joshi.k@samsung.com>

if io_uring sends passthrough command with IORING_URING_CMD_FIXED flag,
use the pre-registered buffer for IO (non-vectored variant). Pass the
buffer/length to io_uring and get the bvec iterator for the range. Next,
pass this bvec to block-layer and obtain a bio/request for subsequent
processing.

Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Suggested-by: Christoph Hellwig <hch@lst.de>
---
 drivers/nvme/host/ioctl.c | 24 +++++++++++++++++-------
 1 file changed, 17 insertions(+), 7 deletions(-)

diff --git a/drivers/nvme/host/ioctl.c b/drivers/nvme/host/ioctl.c
index 4a7e45a263b6..25a68e8c60db 100644
--- a/drivers/nvme/host/ioctl.c
+++ b/drivers/nvme/host/ioctl.c
@@ -95,21 +95,31 @@ static int nvme_map_user_request(struct request *req, u64 ubuffer,
 	void *meta = NULL;
 	int ret;
 
-	if (!vec)
-		ret = blk_rq_map_user(q, req, NULL, ubuffer, bufflen,
-			GFP_KERNEL);
-	else {
+	if (ioucmd && (ioucmd->flags & IORING_URING_CMD_FIXED)) {
+		struct iov_iter iter;
+
+		/* fixedbufs is only for non-vectored io */
+		if (WARN_ON_ONCE(vec))
+			return -EINVAL;
+		ret = io_uring_cmd_import_fixed(ubuffer, bufflen,
+				rq_data_dir(req), &iter, ioucmd);
+		if (ret < 0)
+			goto out;
+		ret = blk_rq_map_user_iov(q, req, NULL, &iter, GFP_KERNEL);
+	} else if (vec) {
 		struct iovec fast_iov[UIO_FASTIOV];
 		struct iovec *iov = fast_iov;
 		struct iov_iter iter;
 
-		ret = import_iovec(rq_data_dir(req), ubuffer, bufflen,
-				UIO_FASTIOV, &iov, &iter);
+		ret = import_iovec(rq_data_dir(req), nvme_to_user_ptr(ubuffer),
+				bufflen, UIO_FASTIOV, &iov, &iter);
 		if (ret < 0)
 			goto out;
-
 		ret = blk_rq_map_user_iov(q, req, NULL, &iter, GFP_KERNEL);
 		kfree(iov);
+	} else {
+		ret = blk_rq_map_user(q, req, NULL,
+				nvme_to_user_ptr(ubuffer), bufflen, GFP_KERNEL);
 	}
 	if (ret)
 		goto out;
-- 
2.25.1

[PATCH for-next v11 11/13] block: add blk_rq_map_user_io

[Anuj Gupta]

Create a helper blk_rq_map_user_io for mapping of vectored as well as
non-vectored requests. This will help in saving dupilcation of code at few
places in scsi and nvme.

Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Suggested-by: Christoph Hellwig <hch@lst.de>
---
 block/blk-map.c        | 36 ++++++++++++++++++++++++++++++++++++
 include/linux/blk-mq.h |  2 ++
 2 files changed, 38 insertions(+)

diff --git a/block/blk-map.c b/block/blk-map.c
index ffab5d2d8d6d..74ee496c2d3a 100644
--- a/block/blk-map.c
+++ b/block/blk-map.c
@@ -689,6 +689,42 @@ int blk_rq_map_user(struct request_queue *q, struct request *rq,
 }
 EXPORT_SYMBOL(blk_rq_map_user);
 
+int blk_rq_map_user_io(struct request *req, struct rq_map_data *map_data,
+		void __user *ubuf, unsigned long buf_len, gfp_t gfp_mask,
+		bool vec, int iov_count, bool check_iter_count, int rw)
+{
+	int ret;
+
+	if (vec) {
+		struct iovec fast_iov[UIO_FASTIOV];
+		struct iovec *iov = fast_iov;
+		struct iov_iter iter;
+
+		ret = import_iovec(rw, ubuf, iov_count ? iov_count : buf_len,
+				UIO_FASTIOV, &iov, &iter);
+		if (ret < 0)
+			return ret;
+
+		if (iov_count) {
+			/* SG_IO howto says that the shorter of the two wins */
+			iov_iter_truncate(&iter, buf_len);
+			if (check_iter_count && !iov_iter_count(&iter)) {
+				kfree(iov);
+				return -EINVAL;
+			}
+		}
+
+		ret = blk_rq_map_user_iov(req->q, req, map_data, &iter,
+				gfp_mask);
+		kfree(iov);
+	} else if (buf_len) {
+		ret = blk_rq_map_user(req->q, req, map_data, ubuf, buf_len,
+				gfp_mask);
+	}
+	return ret;
+}
+EXPORT_SYMBOL(blk_rq_map_user_io);
+
 /**
  * blk_rq_unmap_user - unmap a request with user data
  * @bio:	       start of bio list
diff --git a/include/linux/blk-mq.h b/include/linux/blk-mq.h
index 50811d0fb143..ba18e9bdb799 100644
--- a/include/linux/blk-mq.h
+++ b/include/linux/blk-mq.h
@@ -985,6 +985,8 @@ struct rq_map_data {
 
 int blk_rq_map_user(struct request_queue *, struct request *,
 		struct rq_map_data *, void __user *, unsigned long, gfp_t);
+int blk_rq_map_user_io(struct request *, struct rq_map_data *,
+		void __user *, unsigned long, gfp_t, bool, int, bool, int);
 int blk_rq_map_user_iov(struct request_queue *, struct request *,
 		struct rq_map_data *, const struct iov_iter *, gfp_t);
 int blk_rq_unmap_user(struct bio *);
-- 
2.25.1

[PATCH for-next v11 12/13] scsi: Use blk_rq_map_user_io helper

[Anuj Gupta]

Use the new blk_rq_map_user_io helper instead of duplicating code at
various places.

Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
---
 drivers/scsi/scsi_ioctl.c | 22 +++-------------------
 drivers/scsi/sg.c         | 22 ++--------------------
 2 files changed, 5 insertions(+), 39 deletions(-)

diff --git a/drivers/scsi/scsi_ioctl.c b/drivers/scsi/scsi_ioctl.c
index 729e309e6034..2d20da55fb64 100644
--- a/drivers/scsi/scsi_ioctl.c
+++ b/drivers/scsi/scsi_ioctl.c
@@ -449,25 +449,9 @@ static int sg_io(struct scsi_device *sdev, struct sg_io_hdr *hdr, fmode_t mode)
 	if (ret < 0)
 		goto out_put_request;
 
-	ret = 0;
-	if (hdr->iovec_count && hdr->dxfer_len) {
-		struct iov_iter i;
-		struct iovec *iov = NULL;
-
-		ret = import_iovec(rq_data_dir(rq), hdr->dxferp,
-				   hdr->iovec_count, 0, &iov, &i);
-		if (ret < 0)
-			goto out_put_request;
-
-		/* SG_IO howto says that the shorter of the two wins */
-		iov_iter_truncate(&i, hdr->dxfer_len);
-
-		ret = blk_rq_map_user_iov(rq->q, rq, NULL, &i, GFP_KERNEL);
-		kfree(iov);
-	} else if (hdr->dxfer_len)
-		ret = blk_rq_map_user(rq->q, rq, NULL, hdr->dxferp,
-				      hdr->dxfer_len, GFP_KERNEL);
-
+	ret = blk_rq_map_user_io(rq, NULL, hdr->dxferp, hdr->dxfer_len,
+			GFP_KERNEL, hdr->iovec_count && hdr->dxfer_len,
+			hdr->iovec_count, 0, rq_data_dir(rq));
 	if (ret)
 		goto out_put_request;
 
diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index 94c5e9a9309c..ce34a8ad53b4 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -1804,26 +1804,8 @@ sg_start_req(Sg_request *srp, unsigned char *cmd)
 			md->from_user = 0;
 	}
 
-	if (iov_count) {
-		struct iovec *iov = NULL;
-		struct iov_iter i;
-
-		res = import_iovec(rw, hp->dxferp, iov_count, 0, &iov, &i);
-		if (res < 0)
-			return res;
-
-		iov_iter_truncate(&i, hp->dxfer_len);
-		if (!iov_iter_count(&i)) {
-			kfree(iov);
-			return -EINVAL;
-		}
-
-		res = blk_rq_map_user_iov(q, rq, md, &i, GFP_ATOMIC);
-		kfree(iov);
-	} else
-		res = blk_rq_map_user(q, rq, md, hp->dxferp,
-				      hp->dxfer_len, GFP_ATOMIC);
-
+	res = blk_rq_map_user_io(rq, md, hp->dxferp, hp->dxfer_len,
+			GFP_ATOMIC, iov_count, iov_count, 1, rw);
 	if (!res) {
 		srp->bio = rq->bio;
 
-- 
2.25.1

[PATCH for-next v11 13/13] nvme: Use blk_rq_map_user_io helper

[Anuj Gupta]

User blk_rq_map_user_io instead of duplicating the same code at
different places

Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
---
 drivers/nvme/host/ioctl.c | 17 ++++-------------
 1 file changed, 4 insertions(+), 13 deletions(-)

diff --git a/drivers/nvme/host/ioctl.c b/drivers/nvme/host/ioctl.c
index 25a68e8c60db..a3f22bbe511a 100644
--- a/drivers/nvme/host/ioctl.c
+++ b/drivers/nvme/host/ioctl.c
@@ -106,21 +106,12 @@ static int nvme_map_user_request(struct request *req, u64 ubuffer,
 		if (ret < 0)
 			goto out;
 		ret = blk_rq_map_user_iov(q, req, NULL, &iter, GFP_KERNEL);
-	} else if (vec) {
-		struct iovec fast_iov[UIO_FASTIOV];
-		struct iovec *iov = fast_iov;
-		struct iov_iter iter;
-
-		ret = import_iovec(rq_data_dir(req), nvme_to_user_ptr(ubuffer),
-				bufflen, UIO_FASTIOV, &iov, &iter);
-		if (ret < 0)
-			goto out;
-		ret = blk_rq_map_user_iov(q, req, NULL, &iter, GFP_KERNEL);
-		kfree(iov);
 	} else {
-		ret = blk_rq_map_user(q, req, NULL,
-				nvme_to_user_ptr(ubuffer), bufflen, GFP_KERNEL);
+		ret = blk_rq_map_user_io(req, NULL, nvme_to_user_ptr(ubuffer),
+				bufflen, GFP_KERNEL, vec, 0, 0,
+				rq_data_dir(req));
 	}
+
 	if (ret)
 		goto out;
 	bio = req->bio;
-- 
2.25.1

Re: [PATCH for-next v11 04/13] nvme: refactor nvme_alloc_request

[Christoph Hellwig]

On Thu, Sep 29, 2022 at 05:36:23PM +0530, Anuj Gupta wrote:
> From: Kanchan Joshi <joshi.k@samsung.com>
> 
> nvme_alloc_request expects a large number of parameters.
> Split this out into two functions to reduce number of parameters.
> First one retains the name nvme_alloc_request, while second one is
> named nvme_map_user_request.

Looks good:

Reviewed-by: Christoph Hellwig <hch@lst.de>

Re: [PATCH for-next v11 05/13] block: rename bio_map_put to blk_mq_map_bio_put

[Christoph Hellwig]

Looks good:

Reviewed-by: Christoph Hellwig <hch@lst.de>

Re: [PATCH for-next v11 07/13] block: add blk_rq_map_user_bvec

[Christoph Hellwig]

Please fold this into the next patch - adding a static helper without
users will cause a compiler warning, or even an error with pinheads
favourite -Werror setting.

Re: [PATCH for-next v11 09/13] nvme: pass ubuffer as an integer

[Christoph Hellwig]

Looks good:

Reviewed-by: Christoph Hellwig <hch@lst.de>

Re: [PATCH for-next v11 11/13] block: add blk_rq_map_user_io

[Christoph Hellwig]

On Thu, Sep 29, 2022 at 05:36:30PM +0530, Anuj Gupta wrote:
> Create a helper blk_rq_map_user_io for mapping of vectored as well as
> non-vectored requests. This will help in saving dupilcation of code at few
> places in scsi and nvme.
> 
> Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
> Suggested-by: Christoph Hellwig <hch@lst.de>

This looks good:

Reviewed-by: Christoph Hellwig <hch@lst.de>

but it should be early on in this series.  Certainly before the fixebufs
addition, and probably also before the nvme refactoring.

Re: [PATCH for-next v11 12/13] scsi: Use blk_rq_map_user_io helper

[Christoph Hellwig]

On Thu, Sep 29, 2022 at 05:36:31PM +0530, Anuj Gupta wrote:
> Use the new blk_rq_map_user_io helper instead of duplicating code at
> various places.

Additionally this also takes advantage of the on-stack iov fast path
which should be mentined here.

Othewise looks good:

Reviewed-by: Christoph Hellwig <hch@lst.de>

Re: [PATCH for-next v11 02/13] io_uring: introduce fixed buffer support for io_uring_cmd

[Jens Axboe]

On 9/29/22 6:06 AM, Anuj Gupta wrote:
> diff --git a/io_uring/uring_cmd.c b/io_uring/uring_cmd.c
> index 6a6d69523d75..faefa9f6f259 100644
> --- a/io_uring/uring_cmd.c
> +++ b/io_uring/uring_cmd.c
> @@ -4,6 +4,7 @@
>  #include <linux/file.h>
>  #include <linux/io_uring.h>
>  #include <linux/security.h>
> +#include <linux/nospec.h>
>  
>  #include <uapi/linux/io_uring.h>
>  
> @@ -77,8 +78,21 @@ int io_uring_cmd_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe)
>  {
>  	struct io_uring_cmd *ioucmd = io_kiocb_to_cmd(req, struct io_uring_cmd);
>  
> -	if (sqe->rw_flags || sqe->__pad1)
> +	if (sqe->__pad1)
>  		return -EINVAL;
> +
> +	ioucmd->flags = READ_ONCE(sqe->uring_cmd_flags);

After reading this and checking for IORING_URING_CMD_FIXED, this should
have a:

	if (iocmd->flags & ~IORING_URING_CMD_FIXED)
		return -EINVAL;

to ensure we can safely add more flags in the future. Apart from that,
this looks good.

-- 
Jens Axboe