[PATCH 05/23] target: use bvec_set_page to initialize bvecs

[PATCH 05/23] target: use bvec_set_page to initialize bvecs

[Christoph Hellwig]

Use the bvec_set_page helper to initialize bvecs.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 drivers/target/target_core_file.c | 18 ++++++------------
 1 file changed, 6 insertions(+), 12 deletions(-)

diff --git a/drivers/target/target_core_file.c b/drivers/target/target_core_file.c
index fd584111da45c0..ce0e000b74fc39 100644
--- a/drivers/target/target_core_file.c
+++ b/drivers/target/target_core_file.c
@@ -281,10 +281,8 @@ fd_execute_rw_aio(struct se_cmd *cmd, struct scatterlist *sgl, u32 sgl_nents,
 		return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
 
 	for_each_sg(sgl, sg, sgl_nents, i) {
-		aio_cmd->bvecs[i].bv_page = sg_page(sg);
-		aio_cmd->bvecs[i].bv_len = sg->length;
-		aio_cmd->bvecs[i].bv_offset = sg->offset;
-
+		bvec_set_page(&aio_cmd->bvecs[i], sg_page(sg), sg->length,
+			      sg->offset);
 		len += sg->length;
 	}
 
@@ -329,10 +327,7 @@ static int fd_do_rw(struct se_cmd *cmd, struct file *fd,
 	}
 
 	for_each_sg(sgl, sg, sgl_nents, i) {
-		bvec[i].bv_page = sg_page(sg);
-		bvec[i].bv_len = sg->length;
-		bvec[i].bv_offset = sg->offset;
-
+		bvec_set_page(&bvec[i], sg_page(sg), sg->length, sg->offset);
 		len += sg->length;
 	}
 
@@ -465,10 +460,9 @@ fd_execute_write_same(struct se_cmd *cmd)
 		return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
 
 	for (i = 0; i < nolb; i++) {
-		bvec[i].bv_page = sg_page(&cmd->t_data_sg[0]);
-		bvec[i].bv_len = cmd->t_data_sg[0].length;
-		bvec[i].bv_offset = cmd->t_data_sg[0].offset;
-
+		bvec_set_page(&bvec[i], sg_page(&cmd->t_data_sg[0]),
+			      cmd->t_data_sg[0].length,
+			      cmd->t_data_sg[0].offset);
 		len += se_dev->dev_attrib.block_size;
 	}
 
-- 
2.39.0

Re: [PATCH 05/23] target: use bvec_set_page to initialize bvecs

[Chaitanya Kulkarni]

On 1/30/23 01:21, Christoph Hellwig wrote:
> Use the bvec_set_page helper to initialize bvecs.
> 
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---


Looks good.

Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>

-ck

add bvec initialization helpers v2

[Christoph Hellwig]

Hi all,

this series adds the helpers to initalize a bvec.  These remove open coding of
bvec internals and help with experimenting with other representations like
a phys_addr_t instead of page + offset.

Changes since v1:
 - fix a typo
 - simplify the code in ceph's __iter_get_bvecs a little bit further
 - fix two subject prefixes

Diffstat:
 block/bio-integrity.c             |    7 ------
 block/bio.c                       |   12 +----------
 drivers/block/rbd.c               |    7 ++----
 drivers/block/virtio_blk.c        |    4 ---
 drivers/block/zram/zram_drv.c     |   15 +++-----------
 drivers/nvme/host/core.c          |    4 ---
 drivers/nvme/target/io-cmd-file.c |   10 +--------
 drivers/nvme/target/tcp.c         |    5 +---
 drivers/scsi/sd.c                 |   36 ++++++++++++++++------------------
 drivers/target/target_core_file.c |   18 +++++------------
 drivers/vhost/vringh.c            |    5 +---
 fs/afs/write.c                    |    8 ++-----
 fs/ceph/file.c                    |   12 +++--------
 fs/cifs/connect.c                 |    5 ++--
 fs/cifs/fscache.c                 |   16 +++++----------
 fs/cifs/misc.c                    |    5 +---
 fs/cifs/smb2ops.c                 |    6 ++---
 fs/coredump.c                     |    7 +-----
 fs/nfs/fscache.c                  |   16 +++++----------
 fs/orangefs/inode.c               |   22 ++++++--------------
 fs/splice.c                       |    5 +---
 include/linux/bvec.h              |   40 ++++++++++++++++++++++++++++++++++++++
 io_uring/rsrc.c                   |    4 ---
 mm/page_io.c                      |    8 +------
 net/ceph/messenger_v1.c           |    7 +-----
 net/ceph/messenger_v2.c           |   28 ++++++++++----------------
 net/rxrpc/rxperf.c                |    8 ++-----
 net/sunrpc/svcsock.c              |    7 +-----
 net/sunrpc/xdr.c                  |    5 +---
 29 files changed, 142 insertions(+), 190 deletions(-)

[PATCH 01/23] block: factor out a bvec_set_page helper

[Christoph Hellwig]

Add a helper to initialize a bvec based of a page pointer.  This will help
removing various open code bvec initializations.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
---
 block/bio-integrity.c |  7 +------
 block/bio.c           | 12 ++----------
 include/linux/bvec.h  | 15 +++++++++++++++
 3 files changed, 18 insertions(+), 16 deletions(-)

diff --git a/block/bio-integrity.c b/block/bio-integrity.c
index 3f5685c00e360b..a3776064c52a16 100644
--- a/block/bio-integrity.c
+++ b/block/bio-integrity.c
@@ -124,23 +124,18 @@ int bio_integrity_add_page(struct bio *bio, struct page *page,
 			   unsigned int len, unsigned int offset)
 {
 	struct bio_integrity_payload *bip = bio_integrity(bio);
-	struct bio_vec *iv;
 
 	if (bip->bip_vcnt >= bip->bip_max_vcnt) {
 		printk(KERN_ERR "%s: bip_vec full\n", __func__);
 		return 0;
 	}
 
-	iv = bip->bip_vec + bip->bip_vcnt;
-
 	if (bip->bip_vcnt &&
 	    bvec_gap_to_prev(&bdev_get_queue(bio->bi_bdev)->limits,
 			     &bip->bip_vec[bip->bip_vcnt - 1], offset))
 		return 0;
 
-	iv->bv_page = page;
-	iv->bv_len = len;
-	iv->bv_offset = offset;
+	bvec_set_page(&bip->bip_vec[bip->bip_vcnt], page, len, offset);
 	bip->bip_vcnt++;
 
 	return len;
diff --git a/block/bio.c b/block/bio.c
index d7fbc7adfc50aa..71e411a0c12950 100644
--- a/block/bio.c
+++ b/block/bio.c
@@ -1029,10 +1029,7 @@ int bio_add_hw_page(struct request_queue *q, struct bio *bio,
 	if (bio->bi_vcnt >= queue_max_segments(q))
 		return 0;
 
-	bvec = &bio->bi_io_vec[bio->bi_vcnt];
-	bvec->bv_page = page;
-	bvec->bv_len = len;
-	bvec->bv_offset = offset;
+	bvec_set_page(&bio->bi_io_vec[bio->bi_vcnt], page, len, offset);
 	bio->bi_vcnt++;
 	bio->bi_iter.bi_size += len;
 	return len;
@@ -1108,15 +1105,10 @@ EXPORT_SYMBOL_GPL(bio_add_zone_append_page);
 void __bio_add_page(struct bio *bio, struct page *page,
 		unsigned int len, unsigned int off)
 {
-	struct bio_vec *bv = &bio->bi_io_vec[bio->bi_vcnt];
-
 	WARN_ON_ONCE(bio_flagged(bio, BIO_CLONED));
 	WARN_ON_ONCE(bio_full(bio, len));
 
-	bv->bv_page = page;
-	bv->bv_offset = off;
-	bv->bv_len = len;
-
+	bvec_set_page(&bio->bi_io_vec[bio->bi_vcnt], page, len, off);
 	bio->bi_iter.bi_size += len;
 	bio->bi_vcnt++;
 }
diff --git a/include/linux/bvec.h b/include/linux/bvec.h
index 35c25dff651a5e..9e3dac51eb26b6 100644
--- a/include/linux/bvec.h
+++ b/include/linux/bvec.h
@@ -35,6 +35,21 @@ struct bio_vec {
 	unsigned int	bv_offset;
 };
 
+/**
+ * bvec_set_page - initialize a bvec based off a struct page
+ * @bv:		bvec to initialize
+ * @page:	page the bvec should point to
+ * @len:	length of the bvec
+ * @offset:	offset into the page
+ */
+static inline void bvec_set_page(struct bio_vec *bv, struct page *page,
+		unsigned int len, unsigned int offset)
+{
+	bv->bv_page = page;
+	bv->bv_len = len;
+	bv->bv_offset = offset;
+}
+
 struct bvec_iter {
 	sector_t		bi_sector;	/* device address in 512 byte
 						   sectors */
-- 
2.39.0

[PATCH 02/23] block: add a bvec_set_folio helper

[Christoph Hellwig]

A smaller wrapper around bvec_set_page that takes a folio instead.
There are only two potential users for this in the tree, but the number
will grow in the future.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
---
 include/linux/bvec.h | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/include/linux/bvec.h b/include/linux/bvec.h
index 9e3dac51eb26b6..2bae1134499e7f 100644
--- a/include/linux/bvec.h
+++ b/include/linux/bvec.h
@@ -50,6 +50,19 @@ static inline void bvec_set_page(struct bio_vec *bv, struct page *page,
 	bv->bv_offset = offset;
 }
 
+/**
+ * bvec_set_folio - initialize a bvec based off a struct folio
+ * @bv:		bvec to initialize
+ * @folio:	folio the bvec should point to
+ * @len:	length of the bvec
+ * @offset:	offset into the folio
+ */
+static inline void bvec_set_folio(struct bio_vec *bv, struct folio *folio,
+		unsigned int len, unsigned int offset)
+{
+	bvec_set_page(bv, &folio->page, len, offset);
+}
+
 struct bvec_iter {
 	sector_t		bi_sector;	/* device address in 512 byte
 						   sectors */
-- 
2.39.0

[PATCH 03/23] block: add a bvec_set_virt helper

[Christoph Hellwig]

A small wrapper around bvec_set_page for callers that have a virtual
address.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
---
 include/linux/bvec.h | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/include/linux/bvec.h b/include/linux/bvec.h
index 2bae1134499e7f..f2d22931f3030a 100644
--- a/include/linux/bvec.h
+++ b/include/linux/bvec.h
@@ -63,6 +63,18 @@ static inline void bvec_set_folio(struct bio_vec *bv, struct folio *folio,
 	bvec_set_page(bv, &folio->page, len, offset);
 }
 
+/**
+ * bvec_set_virt - initialize a bvec based on a virtual address
+ * @bv:		bvec to initialize
+ * @vaddr:	virtual address to set the bvec to
+ * @len:	length of the bvec
+ */
+static inline void bvec_set_virt(struct bio_vec *bv, void *vaddr,
+		unsigned int len)
+{
+	bvec_set_page(bv, virt_to_page(vaddr), len, offset_in_page(vaddr));
+}
+
 struct bvec_iter {
 	sector_t		bi_sector;	/* device address in 512 byte
 						   sectors */
-- 
2.39.0

[PATCH 04/23] sd: factor out a sd_set_special_bvec helper

[Christoph Hellwig]

Add a helper for setting up the special_bvec instead of open coding it
in three place, and use the new bvec_set_page helper to initialize
special_vec.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
---
 drivers/scsi/sd.c | 36 +++++++++++++++++-------------------
 1 file changed, 17 insertions(+), 19 deletions(-)

diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 47dafe6b8a66d1..277960decc104b 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -831,6 +831,19 @@ static void sd_config_discard(struct scsi_disk *sdkp, unsigned int mode)
 	blk_queue_max_discard_sectors(q, max_blocks * (logical_block_size >> 9));
 }
 
+static void *sd_set_special_bvec(struct request *rq, unsigned int data_len)
+{
+	struct page *page;
+
+	page = mempool_alloc(sd_page_pool, GFP_ATOMIC);
+	if (!page)
+		return NULL;
+	clear_highpage(page);
+	bvec_set_page(&rq->special_vec, page, data_len, 0);
+	rq->rq_flags |= RQF_SPECIAL_PAYLOAD;
+	return bvec_virt(&rq->special_vec);
+}
+
 static blk_status_t sd_setup_unmap_cmnd(struct scsi_cmnd *cmd)
 {
 	struct scsi_device *sdp = cmd->device;
@@ -841,19 +854,14 @@ static blk_status_t sd_setup_unmap_cmnd(struct scsi_cmnd *cmd)
 	unsigned int data_len = 24;
 	char *buf;
 
-	rq->special_vec.bv_page = mempool_alloc(sd_page_pool, GFP_ATOMIC);
-	if (!rq->special_vec.bv_page)
+	buf = sd_set_special_bvec(rq, data_len);
+	if (!buf)
 		return BLK_STS_RESOURCE;
-	clear_highpage(rq->special_vec.bv_page);
-	rq->special_vec.bv_offset = 0;
-	rq->special_vec.bv_len = data_len;
-	rq->rq_flags |= RQF_SPECIAL_PAYLOAD;
 
 	cmd->cmd_len = 10;
 	cmd->cmnd[0] = UNMAP;
 	cmd->cmnd[8] = 24;
 
-	buf = bvec_virt(&rq->special_vec);
 	put_unaligned_be16(6 + 16, &buf[0]);
 	put_unaligned_be16(16, &buf[2]);
 	put_unaligned_be64(lba, &buf[8]);
@@ -876,13 +884,8 @@ static blk_status_t sd_setup_write_same16_cmnd(struct scsi_cmnd *cmd,
 	u32 nr_blocks = sectors_to_logical(sdp, blk_rq_sectors(rq));
 	u32 data_len = sdp->sector_size;
 
-	rq->special_vec.bv_page = mempool_alloc(sd_page_pool, GFP_ATOMIC);
-	if (!rq->special_vec.bv_page)
+	if (!sd_set_special_bvec(rq, data_len))
 		return BLK_STS_RESOURCE;
-	clear_highpage(rq->special_vec.bv_page);
-	rq->special_vec.bv_offset = 0;
-	rq->special_vec.bv_len = data_len;
-	rq->rq_flags |= RQF_SPECIAL_PAYLOAD;
 
 	cmd->cmd_len = 16;
 	cmd->cmnd[0] = WRITE_SAME_16;
@@ -908,13 +911,8 @@ static blk_status_t sd_setup_write_same10_cmnd(struct scsi_cmnd *cmd,
 	u32 nr_blocks = sectors_to_logical(sdp, blk_rq_sectors(rq));
 	u32 data_len = sdp->sector_size;
 
-	rq->special_vec.bv_page = mempool_alloc(sd_page_pool, GFP_ATOMIC);
-	if (!rq->special_vec.bv_page)
+	if (!sd_set_special_bvec(rq, data_len))
 		return BLK_STS_RESOURCE;
-	clear_highpage(rq->special_vec.bv_page);
-	rq->special_vec.bv_offset = 0;
-	rq->special_vec.bv_len = data_len;
-	rq->rq_flags |= RQF_SPECIAL_PAYLOAD;
 
 	cmd->cmd_len = 10;
 	cmd->cmnd[0] = WRITE_SAME;
-- 
2.39.0

[PATCH 05/23] target: use bvec_set_page to initialize bvecs

[Christoph Hellwig]

Use the bvec_set_page helper to initialize bvecs.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
---
 drivers/target/target_core_file.c | 18 ++++++------------
 1 file changed, 6 insertions(+), 12 deletions(-)

diff --git a/drivers/target/target_core_file.c b/drivers/target/target_core_file.c
index fd584111da45c0..ce0e000b74fc39 100644
--- a/drivers/target/target_core_file.c
+++ b/drivers/target/target_core_file.c
@@ -281,10 +281,8 @@ fd_execute_rw_aio(struct se_cmd *cmd, struct scatterlist *sgl, u32 sgl_nents,
 		return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
 
 	for_each_sg(sgl, sg, sgl_nents, i) {
-		aio_cmd->bvecs[i].bv_page = sg_page(sg);
-		aio_cmd->bvecs[i].bv_len = sg->length;
-		aio_cmd->bvecs[i].bv_offset = sg->offset;
-
+		bvec_set_page(&aio_cmd->bvecs[i], sg_page(sg), sg->length,
+			      sg->offset);
 		len += sg->length;
 	}
 
@@ -329,10 +327,7 @@ static int fd_do_rw(struct se_cmd *cmd, struct file *fd,
 	}
 
 	for_each_sg(sgl, sg, sgl_nents, i) {
-		bvec[i].bv_page = sg_page(sg);
-		bvec[i].bv_len = sg->length;
-		bvec[i].bv_offset = sg->offset;
-
+		bvec_set_page(&bvec[i], sg_page(sg), sg->length, sg->offset);
 		len += sg->length;
 	}
 
@@ -465,10 +460,9 @@ fd_execute_write_same(struct se_cmd *cmd)
 		return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
 
 	for (i = 0; i < nolb; i++) {
-		bvec[i].bv_page = sg_page(&cmd->t_data_sg[0]);
-		bvec[i].bv_len = cmd->t_data_sg[0].length;
-		bvec[i].bv_offset = cmd->t_data_sg[0].offset;
-
+		bvec_set_page(&bvec[i], sg_page(&cmd->t_data_sg[0]),
+			      cmd->t_data_sg[0].length,
+			      cmd->t_data_sg[0].offset);
 		len += se_dev->dev_attrib.block_size;
 	}
 
-- 
2.39.0

[PATCH 06/23] nvmet: use bvec_set_page to initialize bvecs

[Christoph Hellwig]

Use the bvec_set_page helper to initialize bvecs.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
---
 drivers/nvme/target/io-cmd-file.c | 10 ++--------
 drivers/nvme/target/tcp.c         |  5 ++---
 2 files changed, 4 insertions(+), 11 deletions(-)

diff --git a/drivers/nvme/target/io-cmd-file.c b/drivers/nvme/target/io-cmd-file.c
index 871c4f32f443f5..2d068439b129c5 100644
--- a/drivers/nvme/target/io-cmd-file.c
+++ b/drivers/nvme/target/io-cmd-file.c
@@ -73,13 +73,6 @@ int nvmet_file_ns_enable(struct nvmet_ns *ns)
 	return ret;
 }
 
-static void nvmet_file_init_bvec(struct bio_vec *bv, struct scatterlist *sg)
-{
-	bv->bv_page = sg_page(sg);
-	bv->bv_offset = sg->offset;
-	bv->bv_len = sg->length;
-}
-
 static ssize_t nvmet_file_submit_bvec(struct nvmet_req *req, loff_t pos,
 		unsigned long nr_segs, size_t count, int ki_flags)
 {
@@ -146,7 +139,8 @@ static bool nvmet_file_execute_io(struct nvmet_req *req, int ki_flags)
 
 	memset(&req->f.iocb, 0, sizeof(struct kiocb));
 	for_each_sg(req->sg, sg, req->sg_cnt, i) {
-		nvmet_file_init_bvec(&req->f.bvec[bv_cnt], sg);
+		bvec_set_page(&req->f.bvec[bv_cnt], sg_page(sg), sg->length,
+			      sg->offset);
 		len += req->f.bvec[bv_cnt].bv_len;
 		total_len += req->f.bvec[bv_cnt].bv_len;
 		bv_cnt++;
diff --git a/drivers/nvme/target/tcp.c b/drivers/nvme/target/tcp.c
index cc05c094de221d..c5759eb503d004 100644
--- a/drivers/nvme/target/tcp.c
+++ b/drivers/nvme/target/tcp.c
@@ -321,9 +321,8 @@ static void nvmet_tcp_build_pdu_iovec(struct nvmet_tcp_cmd *cmd)
 	while (length) {
 		u32 iov_len = min_t(u32, length, sg->length - sg_offset);
 
-		iov->bv_page = sg_page(sg);
-		iov->bv_len = sg->length;
-		iov->bv_offset = sg->offset + sg_offset;
+		bvec_set_page(iov, sg_page(sg), sg->length,
+				sg->offset + sg_offset);
 
 		length -= iov_len;
 		sg = sg_next(sg);
-- 
2.39.0

[PATCH 07/23] nvme: use bvec_set_virt to initialize special_vec

[Christoph Hellwig]

Use the bvec_set_virt helper to initialize the special_vec.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
---
 drivers/nvme/host/core.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 505e16f20e57fa..7ba1accc3c22a4 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -806,9 +806,7 @@ static blk_status_t nvme_setup_discard(struct nvme_ns *ns, struct request *req,
 	cmnd->dsm.nr = cpu_to_le32(segments - 1);
 	cmnd->dsm.attributes = cpu_to_le32(NVME_DSMGMT_AD);
 
-	req->special_vec.bv_page = virt_to_page(range);
-	req->special_vec.bv_offset = offset_in_page(range);
-	req->special_vec.bv_len = alloc_size;
+	bvec_set_virt(&req->special_vec, range, alloc_size);
 	req->rq_flags |= RQF_SPECIAL_PAYLOAD;
 
 	return BLK_STS_OK;
-- 
2.39.0

[PATCH 08/23] rbd: use bvec_set_page to initialize the copy up bvec

[Christoph Hellwig]

Use the bvec_set_page helper to initialize the copy up bvec.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
---
 drivers/block/rbd.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c
index 04453f4a319cb4..1faca7e07a4d52 100644
--- a/drivers/block/rbd.c
+++ b/drivers/block/rbd.c
@@ -3068,13 +3068,12 @@ static int setup_copyup_bvecs(struct rbd_obj_request *obj_req, u64 obj_overlap)
 
 	for (i = 0; i < obj_req->copyup_bvec_count; i++) {
 		unsigned int len = min(obj_overlap, (u64)PAGE_SIZE);
+		struct page *page = alloc_page(GFP_NOIO);
 
-		obj_req->copyup_bvecs[i].bv_page = alloc_page(GFP_NOIO);
-		if (!obj_req->copyup_bvecs[i].bv_page)
+		if (!page)
 			return -ENOMEM;
 
-		obj_req->copyup_bvecs[i].bv_offset = 0;
-		obj_req->copyup_bvecs[i].bv_len = len;
+		bvec_set_page(&obj_req->copyup_bvecs[i], page, len, 0);
 		obj_overlap -= len;
 	}
 
-- 
2.39.0

[PATCH 09/23] virtio_blk: use bvec_set_virt to initialize special_vec

[Christoph Hellwig]

Use the bvec_set_virt helper to initialize the special_vec.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
---
 drivers/block/virtio_blk.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index 6a77fa91742880..dc6e9b989910b0 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -170,9 +170,7 @@ static int virtblk_setup_discard_write_zeroes_erase(struct request *req, bool un
 
 	WARN_ON_ONCE(n != segments);
 
-	req->special_vec.bv_page = virt_to_page(range);
-	req->special_vec.bv_offset = offset_in_page(range);
-	req->special_vec.bv_len = sizeof(*range) * segments;
+	bvec_set_virt(&req->special_vec, range, sizeof(*range) * segments);
 	req->rq_flags |= RQF_SPECIAL_PAYLOAD;
 
 	return 0;
-- 
2.39.0

[PATCH 10/23] zram: use bvec_set_page to initialize bvecs

[Christoph Hellwig]

Use the bvec_set_page helper to initialize bvecs.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
---
 drivers/block/zram/zram_drv.c | 15 ++++-----------
 1 file changed, 4 insertions(+), 11 deletions(-)

diff --git a/drivers/block/zram/zram_drv.c b/drivers/block/zram/zram_drv.c
index e290d6d970474e..bd8ae4822dc3ef 100644
--- a/drivers/block/zram/zram_drv.c
+++ b/drivers/block/zram/zram_drv.c
@@ -703,9 +703,7 @@ static ssize_t writeback_store(struct device *dev,
 	for (; nr_pages != 0; index++, nr_pages--) {
 		struct bio_vec bvec;
 
-		bvec.bv_page = page;
-		bvec.bv_len = PAGE_SIZE;
-		bvec.bv_offset = 0;
+		bvec_set_page(&bvec, page, PAGE_SIZE, 0);
 
 		spin_lock(&zram->wb_limit_lock);
 		if (zram->wb_limit_enable && !zram->bd_wb_limit) {
@@ -1380,12 +1378,9 @@ static void zram_free_page(struct zram *zram, size_t index)
 static int zram_bvec_read_from_bdev(struct zram *zram, struct page *page,
 				    u32 index, struct bio *bio, bool partial_io)
 {
-	struct bio_vec bvec = {
-		.bv_page = page,
-		.bv_len = PAGE_SIZE,
-		.bv_offset = 0,
-	};
+	struct bio_vec bvec;
 
+	bvec_set_page(&bvec, page, PAGE_SIZE, 0);
 	return read_from_bdev(zram, &bvec, zram_get_element(zram, index), bio,
 			      partial_io);
 }
@@ -1652,9 +1647,7 @@ static int zram_bvec_write(struct zram *zram, struct bio_vec *bvec,
 		memcpy_from_bvec(dst + offset, bvec);
 		kunmap_atomic(dst);
 
-		vec.bv_page = page;
-		vec.bv_len = PAGE_SIZE;
-		vec.bv_offset = 0;
+		bvec_set_page(&vec, page, PAGE_SIZE, 0);
 	}
 
 	ret = __zram_bvec_write(zram, &vec, index, bio);
-- 
2.39.0

[PATCH 11/23] afs: use bvec_set_folio to initialize a bvec

[Christoph Hellwig]

Use the bvec_set_folio helper to initialize a bvec.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: David Howells <dhowells@redhat.com>
---
 fs/afs/write.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/fs/afs/write.c b/fs/afs/write.c
index 19df10d63323d8..2d17891b618e6e 100644
--- a/fs/afs/write.c
+++ b/fs/afs/write.c
@@ -992,7 +992,7 @@ int afs_launder_folio(struct folio *folio)
 {
 	struct afs_vnode *vnode = AFS_FS_I(folio_inode(folio));
 	struct iov_iter iter;
-	struct bio_vec bv[1];
+	struct bio_vec bv;
 	unsigned long priv;
 	unsigned int f, t;
 	int ret = 0;
@@ -1008,10 +1008,8 @@ int afs_launder_folio(struct folio *folio)
 			t = afs_folio_dirty_to(folio, priv);
 		}
 
-		bv[0].bv_page = &folio->page;
-		bv[0].bv_offset = f;
-		bv[0].bv_len = t - f;
-		iov_iter_bvec(&iter, ITER_SOURCE, bv, 1, bv[0].bv_len);
+		bvec_set_folio(&bv, folio, t - f, f);
+		iov_iter_bvec(&iter, ITER_SOURCE, &bv, 1, bv.bv_len);
 
 		trace_afs_folio_dirty(vnode, tracepoint_string("launder"), folio);
 		ret = afs_store_data(vnode, &iter, folio_pos(folio) + f, true);
-- 
2.39.0

[PATCH 12/23] ceph: use bvec_set_page to initialize a bvec

[Christoph Hellwig]

Use the bvec_set_page helper to initialize a bvec.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 fs/ceph/file.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/fs/ceph/file.c b/fs/ceph/file.c
index 764598e1efd91f..90b2aa7963bf29 100644
--- a/fs/ceph/file.c
+++ b/fs/ceph/file.c
@@ -103,14 +103,10 @@ static ssize_t __iter_get_bvecs(struct iov_iter *iter, size_t maxsize,
 		size += bytes;
 
 		for ( ; bytes; idx++, bvec_idx++) {
-			struct bio_vec bv = {
-				.bv_page = pages[idx],
-				.bv_len = min_t(int, bytes, PAGE_SIZE - start),
-				.bv_offset = start,
-			};
-
-			bvecs[bvec_idx] = bv;
-			bytes -= bv.bv_len;
+			int len = min_t(int, bytes, PAGE_SIZE - start);
+
+			bvec_set_page(&bvecs[bvec_idx], pages[idx], len, start);
+			bytes -= len;
 			start = 0;
 		}
 	}
-- 
2.39.0

[PATCH 13/23] cifs: use bvec_set_page to initialize bvecs

[Christoph Hellwig]

Use the bvec_set_page helper to initialize bvecs.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
---
 fs/cifs/connect.c |  5 +++--
 fs/cifs/fscache.c | 16 ++++++----------
 fs/cifs/misc.c    |  5 ++---
 fs/cifs/smb2ops.c |  6 +++---
 4 files changed, 14 insertions(+), 18 deletions(-)

diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index b2a04b4e89a5e7..e6088d96eb04d2 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -759,8 +759,9 @@ cifs_read_page_from_socket(struct TCP_Server_Info *server, struct page *page,
 	unsigned int page_offset, unsigned int to_read)
 {
 	struct msghdr smb_msg = {};
-	struct bio_vec bv = {
-		.bv_page = page, .bv_len = to_read, .bv_offset = page_offset};
+	struct bio_vec bv;
+
+	bvec_set_page(&bv, page, to_read, page_offset);
 	iov_iter_bvec(&smb_msg.msg_iter, ITER_DEST, &bv, 1, to_read);
 	return cifs_readv_from_socket(server, &smb_msg);
 }
diff --git a/fs/cifs/fscache.c b/fs/cifs/fscache.c
index f6f3a6b75601be..0911327ebfdeb4 100644
--- a/fs/cifs/fscache.c
+++ b/fs/cifs/fscache.c
@@ -143,14 +143,12 @@ static int fscache_fallback_read_page(struct inode *inode, struct page *page)
 	struct netfs_cache_resources cres;
 	struct fscache_cookie *cookie = cifs_inode_cookie(inode);
 	struct iov_iter iter;
-	struct bio_vec bvec[1];
+	struct bio_vec bvec;
 	int ret;
 
 	memset(&cres, 0, sizeof(cres));
-	bvec[0].bv_page		= page;
-	bvec[0].bv_offset	= 0;
-	bvec[0].bv_len		= PAGE_SIZE;
-	iov_iter_bvec(&iter, ITER_DEST, bvec, ARRAY_SIZE(bvec), PAGE_SIZE);
+	bvec_set_page(&bvec, page, PAGE_SIZE, 0);
+	iov_iter_bvec(&iter, ITER_DEST, &bvec, 1, PAGE_SIZE);
 
 	ret = fscache_begin_read_operation(&cres, cookie);
 	if (ret < 0)
@@ -171,16 +169,14 @@ static int fscache_fallback_write_page(struct inode *inode, struct page *page,
 	struct netfs_cache_resources cres;
 	struct fscache_cookie *cookie = cifs_inode_cookie(inode);
 	struct iov_iter iter;
-	struct bio_vec bvec[1];
+	struct bio_vec bvec;
 	loff_t start = page_offset(page);
 	size_t len = PAGE_SIZE;
 	int ret;
 
 	memset(&cres, 0, sizeof(cres));
-	bvec[0].bv_page		= page;
-	bvec[0].bv_offset	= 0;
-	bvec[0].bv_len		= PAGE_SIZE;
-	iov_iter_bvec(&iter, ITER_SOURCE, bvec, ARRAY_SIZE(bvec), PAGE_SIZE);
+	bvec_set_page(&bvec, page, PAGE_SIZE, 0);
+	iov_iter_bvec(&iter, ITER_SOURCE, &bvec, 1, PAGE_SIZE);
 
 	ret = fscache_begin_write_operation(&cres, cookie);
 	if (ret < 0)
diff --git a/fs/cifs/misc.c b/fs/cifs/misc.c
index 2a19c7987c5bd8..95cc4d7dd806d7 100644
--- a/fs/cifs/misc.c
+++ b/fs/cifs/misc.c
@@ -1054,9 +1054,8 @@ setup_aio_ctx_iter(struct cifs_aio_ctx *ctx, struct iov_iter *iter, int rw)
 
 		for (i = 0; i < cur_npages; i++) {
 			len = rc > PAGE_SIZE ? PAGE_SIZE : rc;
-			bv[npages + i].bv_page = pages[i];
-			bv[npages + i].bv_offset = start;
-			bv[npages + i].bv_len = len - start;
+			bvec_set_page(&bv[npages + i], pages[i], len - start,
+				      start);
 			rc -= len;
 			start = 0;
 		}
diff --git a/fs/cifs/smb2ops.c b/fs/cifs/smb2ops.c
index e6bcd2baf446a9..cb2deac6b2d70e 100644
--- a/fs/cifs/smb2ops.c
+++ b/fs/cifs/smb2ops.c
@@ -4598,9 +4598,9 @@ init_read_bvec(struct page **pages, unsigned int npages, unsigned int data_size,
 		return -ENOMEM;
 
 	for (i = 0; i < npages; i++) {
-		bvec[i].bv_page = pages[i];
-		bvec[i].bv_offset = (i == 0) ? cur_off : 0;
-		bvec[i].bv_len = min_t(unsigned int, PAGE_SIZE, data_size);
+		bvec_set_page(&bvec[i], pages[i],
+			      min_t(unsigned int, PAGE_SIZE, data_size),
+			      i == 0 ? cur_off : 0);
 		data_size -= bvec[i].bv_len;
 	}
 
-- 
2.39.0

[PATCH 14/23] coredump: use bvec_set_page to initialize a bvec

[Christoph Hellwig]

Use the bvec_set_page helper to initialize a bvec.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 fs/coredump.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/fs/coredump.c b/fs/coredump.c
index de78bde2991beb..0a6873a9c4d0cd 100644
--- a/fs/coredump.c
+++ b/fs/coredump.c
@@ -840,11 +840,7 @@ static int __dump_skip(struct coredump_params *cprm, size_t nr)
 
 static int dump_emit_page(struct coredump_params *cprm, struct page *page)
 {
-	struct bio_vec bvec = {
-		.bv_page	= page,
-		.bv_offset	= 0,
-		.bv_len		= PAGE_SIZE,
-	};
+	struct bio_vec bvec;
 	struct iov_iter iter;
 	struct file *file = cprm->file;
 	loff_t pos;
@@ -860,6 +856,7 @@ static int dump_emit_page(struct coredump_params *cprm, struct page *page)
 	if (dump_interrupted())
 		return 0;
 	pos = file->f_pos;
+	bvec_set_page(&bvec, page, PAGE_SIZE, 0);
 	iov_iter_bvec(&iter, ITER_SOURCE, &bvec, 1, PAGE_SIZE);
 	n = __kernel_write_iter(cprm->file, &iter, &pos);
 	if (n != PAGE_SIZE)
-- 
2.39.0

[PATCH 15/23] nfs: use bvec_set_page to initialize bvecs

[Christoph Hellwig]

Use the bvec_set_page helper to initialize bvecs.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Trond Myklebust <trond.myklebust@hammerspace.com>
---
 fs/nfs/fscache.c | 16 ++++++----------
 1 file changed, 6 insertions(+), 10 deletions(-)

diff --git a/fs/nfs/fscache.c b/fs/nfs/fscache.c
index e731c00a9fcbc3..ea5f2976dfaba4 100644
--- a/fs/nfs/fscache.c
+++ b/fs/nfs/fscache.c
@@ -245,14 +245,12 @@ static int fscache_fallback_read_page(struct inode *inode, struct page *page)
 	struct netfs_cache_resources cres;
 	struct fscache_cookie *cookie = nfs_i_fscache(inode);
 	struct iov_iter iter;
-	struct bio_vec bvec[1];
+	struct bio_vec bvec;
 	int ret;
 
 	memset(&cres, 0, sizeof(cres));
-	bvec[0].bv_page		= page;
-	bvec[0].bv_offset	= 0;
-	bvec[0].bv_len		= PAGE_SIZE;
-	iov_iter_bvec(&iter, ITER_DEST, bvec, ARRAY_SIZE(bvec), PAGE_SIZE);
+	bvec_set_page(&bvec, page, PAGE_SIZE, 0);
+	iov_iter_bvec(&iter, ITER_DEST, &bvec, 1, PAGE_SIZE);
 
 	ret = fscache_begin_read_operation(&cres, cookie);
 	if (ret < 0)
@@ -273,16 +271,14 @@ static int fscache_fallback_write_page(struct inode *inode, struct page *page,
 	struct netfs_cache_resources cres;
 	struct fscache_cookie *cookie = nfs_i_fscache(inode);
 	struct iov_iter iter;
-	struct bio_vec bvec[1];
+	struct bio_vec bvec;
 	loff_t start = page_offset(page);
 	size_t len = PAGE_SIZE;
 	int ret;
 
 	memset(&cres, 0, sizeof(cres));
-	bvec[0].bv_page		= page;
-	bvec[0].bv_offset	= 0;
-	bvec[0].bv_len		= PAGE_SIZE;
-	iov_iter_bvec(&iter, ITER_SOURCE, bvec, ARRAY_SIZE(bvec), PAGE_SIZE);
+	bvec_set_page(&bvec, page, PAGE_SIZE, 0);
+	iov_iter_bvec(&iter, ITER_SOURCE, &bvec, 1, PAGE_SIZE);
 
 	ret = fscache_begin_write_operation(&cres, cookie);
 	if (ret < 0)
-- 
2.39.0

[PATCH 16/23] orangefs: use bvec_set_{page,folio} to initialize bvecs

[Christoph Hellwig]

Use the bvec_set_page and bvec_set_folio helpers to initialize bvecs.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 fs/orangefs/inode.c | 22 +++++++---------------
 1 file changed, 7 insertions(+), 15 deletions(-)

diff --git a/fs/orangefs/inode.c b/fs/orangefs/inode.c
index 4df56089438664..215f6cb3dc4129 100644
--- a/fs/orangefs/inode.c
+++ b/fs/orangefs/inode.c
@@ -49,10 +49,8 @@ static int orangefs_writepage_locked(struct page *page,
 	/* Should've been handled in orangefs_invalidate_folio. */
 	WARN_ON(off == len || off + wlen > len);
 
-	bv.bv_page = page;
-	bv.bv_len = wlen;
-	bv.bv_offset = off % PAGE_SIZE;
 	WARN_ON(wlen == 0);
+	bvec_set_page(&bv, page, wlen, off % PAGE_SIZE);
 	iov_iter_bvec(&iter, ITER_SOURCE, &bv, 1, wlen);
 
 	ret = wait_for_direct_io(ORANGEFS_IO_WRITE, inode, &off, &iter, wlen,
@@ -102,15 +100,11 @@ static int orangefs_writepages_work(struct orangefs_writepages *ow,
 
 	for (i = 0; i < ow->npages; i++) {
 		set_page_writeback(ow->pages[i]);
-		ow->bv[i].bv_page = ow->pages[i];
-		ow->bv[i].bv_len = min(page_offset(ow->pages[i]) + PAGE_SIZE,
-		    ow->off + ow->len) -
-		    max(ow->off, page_offset(ow->pages[i]));
-		if (i == 0)
-			ow->bv[i].bv_offset = ow->off -
-			    page_offset(ow->pages[i]);
-		else
-			ow->bv[i].bv_offset = 0;
+		bvec_set_page(&ow->bv[i], ow->pages[i],
+			      min(page_offset(ow->pages[i]) + PAGE_SIZE,
+			          ow->off + ow->len) -
+			      max(ow->off, page_offset(ow->pages[i])),
+			      i == 0 ? ow->off - page_offset(ow->pages[i]) : 0);
 	}
 	iov_iter_bvec(&iter, ITER_SOURCE, ow->bv, ow->npages, ow->len);
 
@@ -300,9 +294,7 @@ static int orangefs_read_folio(struct file *file, struct folio *folio)
 		orangefs_launder_folio(folio);
 
 	off = folio_pos(folio);
-	bv.bv_page = &folio->page;
-	bv.bv_len = folio_size(folio);
-	bv.bv_offset = 0;
+	bvec_set_folio(&bv, folio, folio_size(folio), 0);
 	iov_iter_bvec(&iter, ITER_DEST, &bv, 1, folio_size(folio));
 
 	ret = wait_for_direct_io(ORANGEFS_IO_READ, inode, &off, &iter,
-- 
2.39.0

[PATCH 17/23] splice: use bvec_set_page to initialize a bvec

[Christoph Hellwig]

Use the bvec_set_page helper to initialize a bvec.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 fs/splice.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/fs/splice.c b/fs/splice.c
index 5969b7a1d353a8..87d9b19349de63 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -675,9 +675,8 @@ iter_file_splice_write(struct pipe_inode_info *pipe, struct file *out,
 				goto done;
 			}
 
-			array[n].bv_page = buf->page;
-			array[n].bv_len = this_len;
-			array[n].bv_offset = buf->offset;
+			bvec_set_page(&array[n], buf->page, this_len,
+				      buf->offset);
 			left -= this_len;
 			n++;
 		}
-- 
2.39.0

[PATCH 18/23] io_uring: use bvec_set_page to initialize a bvec

[Christoph Hellwig]

Use the bvec_set_page helper to initialize a bvec.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
---
 io_uring/rsrc.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/io_uring/rsrc.c b/io_uring/rsrc.c
index 18de10c68a151b..a59fc02de5983c 100644
--- a/io_uring/rsrc.c
+++ b/io_uring/rsrc.c
@@ -1237,9 +1237,7 @@ static int io_sqe_buffer_register(struct io_ring_ctx *ctx, struct iovec *iov,
 		size_t vec_len;
 
 		vec_len = min_t(size_t, size, PAGE_SIZE - off);
-		imu->bvec[i].bv_page = pages[i];
-		imu->bvec[i].bv_len = vec_len;
-		imu->bvec[i].bv_offset = off;
+		bvec_set_page(&imu->bvec[i], pages[i], vec_len, off);
 		off = 0;
 		size -= vec_len;
 	}
-- 
2.39.0

[PATCH 19/23] swap: use bvec_set_page to initialize bvecs

[Christoph Hellwig]

Use the bvec_set_page helper to initialize bvecs.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 mm/page_io.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/mm/page_io.c b/mm/page_io.c
index 3a5f921b932e82..233f6e6eb1c508 100644
--- a/mm/page_io.c
+++ b/mm/page_io.c
@@ -318,9 +318,7 @@ static int swap_writepage_fs(struct page *page, struct writeback_control *wbc)
 		sio->pages = 0;
 		sio->len = 0;
 	}
-	sio->bvec[sio->pages].bv_page = page;
-	sio->bvec[sio->pages].bv_len = thp_size(page);
-	sio->bvec[sio->pages].bv_offset = 0;
+	bvec_set_page(&sio->bvec[sio->pages], page, thp_size(page), 0);
 	sio->len += thp_size(page);
 	sio->pages += 1;
 	if (sio->pages == ARRAY_SIZE(sio->bvec) || !wbc->swap_plug) {
@@ -432,9 +430,7 @@ static void swap_readpage_fs(struct page *page,
 		sio->pages = 0;
 		sio->len = 0;
 	}
-	sio->bvec[sio->pages].bv_page = page;
-	sio->bvec[sio->pages].bv_len = thp_size(page);
-	sio->bvec[sio->pages].bv_offset = 0;
+	bvec_set_page(&sio->bvec[sio->pages], page, thp_size(page), 0);
 	sio->len += thp_size(page);
 	sio->pages += 1;
 	if (sio->pages == ARRAY_SIZE(sio->bvec) || !plug) {
-- 
2.39.0

[PATCH 20/23] rxrpc: use bvec_set_page to initialize a bvec

[Christoph Hellwig]

Use the bvec_set_page helper to initialize a bvec.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: David Howells <dhowells@redhat.com>
---
 net/rxrpc/rxperf.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/net/rxrpc/rxperf.c b/net/rxrpc/rxperf.c
index 16dcabb71ebe16..4a2e90015ca72c 100644
--- a/net/rxrpc/rxperf.c
+++ b/net/rxrpc/rxperf.c
@@ -493,7 +493,7 @@ static int rxperf_deliver_request(struct rxperf_call *call)
 static int rxperf_process_call(struct rxperf_call *call)
 {
 	struct msghdr msg = {};
-	struct bio_vec bv[1];
+	struct bio_vec bv;
 	struct kvec iov[1];
 	ssize_t n;
 	size_t reply_len = call->reply_len, len;
@@ -503,10 +503,8 @@ static int rxperf_process_call(struct rxperf_call *call)
 
 	while (reply_len > 0) {
 		len = min_t(size_t, reply_len, PAGE_SIZE);
-		bv[0].bv_page	= ZERO_PAGE(0);
-		bv[0].bv_offset	= 0;
-		bv[0].bv_len	= len;
-		iov_iter_bvec(&msg.msg_iter, WRITE, bv, 1, len);
+		bvec_set_page(&bv, ZERO_PAGE(0), len, 0);
+		iov_iter_bvec(&msg.msg_iter, WRITE, &bv, 1, len);
 		msg.msg_flags = MSG_MORE;
 		n = rxrpc_kernel_send_data(rxperf_socket, call->rxcall, &msg,
 					   len, rxperf_notify_end_reply_tx);
-- 
2.39.0

[PATCH 21/23] sunrpc: use bvec_set_page to initialize bvecs

[Christoph Hellwig]

Use the bvec_set_page helper to initialize bvecs.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Trond Myklebust <trond.myklebust@hammerspace.com>
---
 net/sunrpc/svcsock.c | 7 ++-----
 net/sunrpc/xdr.c     | 5 ++---
 2 files changed, 4 insertions(+), 8 deletions(-)

diff --git a/net/sunrpc/svcsock.c b/net/sunrpc/svcsock.c
index 815baf308236a9..91252adcae4696 100644
--- a/net/sunrpc/svcsock.c
+++ b/net/sunrpc/svcsock.c
@@ -252,11 +252,8 @@ static ssize_t svc_tcp_read_msg(struct svc_rqst *rqstp, size_t buflen,
 
 	clear_bit(XPT_DATA, &svsk->sk_xprt.xpt_flags);
 
-	for (i = 0, t = 0; t < buflen; i++, t += PAGE_SIZE) {
-		bvec[i].bv_page = rqstp->rq_pages[i];
-		bvec[i].bv_len = PAGE_SIZE;
-		bvec[i].bv_offset = 0;
-	}
+	for (i = 0, t = 0; t < buflen; i++, t += PAGE_SIZE)
+		bvec_set_page(&bvec[i], rqstp->rq_pages[i], PAGE_SIZE, 0);
 	rqstp->rq_respages = &rqstp->rq_pages[i];
 	rqstp->rq_next_page = rqstp->rq_respages + 1;
 
diff --git a/net/sunrpc/xdr.c b/net/sunrpc/xdr.c
index f7767bf224069f..afe7ec02d23229 100644
--- a/net/sunrpc/xdr.c
+++ b/net/sunrpc/xdr.c
@@ -150,9 +150,8 @@ xdr_alloc_bvec(struct xdr_buf *buf, gfp_t gfp)
 		if (!buf->bvec)
 			return -ENOMEM;
 		for (i = 0; i < n; i++) {
-			buf->bvec[i].bv_page = buf->pages[i];
-			buf->bvec[i].bv_len = PAGE_SIZE;
-			buf->bvec[i].bv_offset = 0;
+			bvec_set_page(&buf->bvec[i], buf->pages[i], PAGE_SIZE,
+				      0);
 		}
 	}
 	return 0;
-- 
2.39.0

[PATCH 22/23] vringh: use bvec_set_page to initialize a bvec

[Christoph Hellwig]

Use the bvec_set_page helper to initialize a bvec.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jason Wang <jasowang@redhat.com>
---
 drivers/vhost/vringh.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/vhost/vringh.c b/drivers/vhost/vringh.c
index 33eb941fcf1546..a1e27da544814a 100644
--- a/drivers/vhost/vringh.c
+++ b/drivers/vhost/vringh.c
@@ -1126,9 +1126,8 @@ static int iotlb_translate(const struct vringh *vrh,
 		size = map->size - addr + map->start;
 		pa = map->addr + addr - map->start;
 		pfn = pa >> PAGE_SHIFT;
-		iov[ret].bv_page = pfn_to_page(pfn);
-		iov[ret].bv_len = min(len - s, size);
-		iov[ret].bv_offset = pa & (PAGE_SIZE - 1);
+		bvec_set_page(&iov[ret], pfn_to_page(pfn), min(len - s, size),
+			      pa & (PAGE_SIZE - 1));
 		s += size;
 		addr += size;
 		++ret;
-- 
2.39.0

[PATCH 23/23] libceph: use bvec_set_page to initialize bvecs

[Christoph Hellwig]

Use the bvec_set_page helper to initialize bvecs.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
---
 net/ceph/messenger_v1.c |  7 ++-----
 net/ceph/messenger_v2.c | 28 +++++++++++-----------------
 2 files changed, 13 insertions(+), 22 deletions(-)

diff --git a/net/ceph/messenger_v1.c b/net/ceph/messenger_v1.c
index d1787d7d33ef9a..d664cb1593a777 100644
--- a/net/ceph/messenger_v1.c
+++ b/net/ceph/messenger_v1.c
@@ -40,15 +40,12 @@ static int ceph_tcp_recvmsg(struct socket *sock, void *buf, size_t len)
 static int ceph_tcp_recvpage(struct socket *sock, struct page *page,
 		     int page_offset, size_t length)
 {
-	struct bio_vec bvec = {
-		.bv_page = page,
-		.bv_offset = page_offset,
-		.bv_len = length
-	};
+	struct bio_vec bvec;
 	struct msghdr msg = { .msg_flags = MSG_DONTWAIT | MSG_NOSIGNAL };
 	int r;
 
 	BUG_ON(page_offset + length > PAGE_SIZE);
+	bvec_set_page(&bvec, page, length, page_offset);
 	iov_iter_bvec(&msg.msg_iter, ITER_DEST, &bvec, 1, length);
 	r = sock_recvmsg(sock, &msg, msg.msg_flags);
 	if (r == -EAGAIN)
diff --git a/net/ceph/messenger_v2.c b/net/ceph/messenger_v2.c
index 3009028c4fa28f..301a991dc6a68e 100644
--- a/net/ceph/messenger_v2.c
+++ b/net/ceph/messenger_v2.c
@@ -149,10 +149,10 @@ static int do_try_sendpage(struct socket *sock, struct iov_iter *it)
 
 	while (iov_iter_count(it)) {
 		/* iov_iter_iovec() for ITER_BVEC */
-		bv.bv_page = it->bvec->bv_page;
-		bv.bv_offset = it->bvec->bv_offset + it->iov_offset;
-		bv.bv_len = min(iov_iter_count(it),
-				it->bvec->bv_len - it->iov_offset);
+		bvec_set_page(&bv, it->bvec->bv_page,
+			      min(iov_iter_count(it),
+				  it->bvec->bv_len - it->iov_offset),
+			      it->bvec->bv_offset + it->iov_offset);
 
 		/*
 		 * sendpage cannot properly handle pages with
@@ -286,9 +286,8 @@ static void set_out_bvec_zero(struct ceph_connection *con)
 	WARN_ON(iov_iter_count(&con->v2.out_iter));
 	WARN_ON(!con->v2.out_zero);
 
-	con->v2.out_bvec.bv_page = ceph_zero_page;
-	con->v2.out_bvec.bv_offset = 0;
-	con->v2.out_bvec.bv_len = min(con->v2.out_zero, (int)PAGE_SIZE);
+	bvec_set_page(&con->v2.out_bvec, ceph_zero_page,
+		      min(con->v2.out_zero, (int)PAGE_SIZE), 0);
 	con->v2.out_iter_sendpage = true;
 	iov_iter_bvec(&con->v2.out_iter, ITER_SOURCE, &con->v2.out_bvec, 1,
 		      con->v2.out_bvec.bv_len);
@@ -863,10 +862,7 @@ static void get_bvec_at(struct ceph_msg_data_cursor *cursor,
 
 	/* get a piece of data, cursor isn't advanced */
 	page = ceph_msg_data_next(cursor, &off, &len);
-
-	bv->bv_page = page;
-	bv->bv_offset = off;
-	bv->bv_len = len;
+	bvec_set_page(bv, page, len, off);
 }
 
 static int calc_sg_cnt(void *buf, int buf_len)
@@ -1855,9 +1851,8 @@ static void prepare_read_enc_page(struct ceph_connection *con)
 	     con->v2.in_enc_resid);
 	WARN_ON(!con->v2.in_enc_resid);
 
-	bv.bv_page = con->v2.in_enc_pages[con->v2.in_enc_i];
-	bv.bv_offset = 0;
-	bv.bv_len = min(con->v2.in_enc_resid, (int)PAGE_SIZE);
+	bvec_set_page(&bv, con->v2.in_enc_pages[con->v2.in_enc_i],
+		      min(con->v2.in_enc_resid, (int)PAGE_SIZE), 0);
 
 	set_in_bvec(con, &bv);
 	con->v2.in_enc_i++;
@@ -2998,9 +2993,8 @@ static void queue_enc_page(struct ceph_connection *con)
 	     con->v2.out_enc_resid);
 	WARN_ON(!con->v2.out_enc_resid);
 
-	bv.bv_page = con->v2.out_enc_pages[con->v2.out_enc_i];
-	bv.bv_offset = 0;
-	bv.bv_len = min(con->v2.out_enc_resid, (int)PAGE_SIZE);
+	bvec_set_page(&bv, con->v2.out_enc_pages[con->v2.out_enc_i],
+		      min(con->v2.out_enc_resid, (int)PAGE_SIZE), 0);
 
 	set_out_bvec(con, &bv, false);
 	con->v2.out_enc_i++;
-- 
2.39.0

Re: [PATCH 12/23] ceph: use bvec_set_page to initialize a bvec

[Ilya Dryomov]

On Fri, Feb 3, 2023 at 4:07 PM Christoph Hellwig <hch@lst.de> wrote:
>
> Use the bvec_set_page helper to initialize a bvec.
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---
>  fs/ceph/file.c | 12 ++++--------
>  1 file changed, 4 insertions(+), 8 deletions(-)
>
> diff --git a/fs/ceph/file.c b/fs/ceph/file.c
> index 764598e1efd91f..90b2aa7963bf29 100644
> --- a/fs/ceph/file.c
> +++ b/fs/ceph/file.c
> @@ -103,14 +103,10 @@ static ssize_t __iter_get_bvecs(struct iov_iter *iter, size_t maxsize,
>                 size += bytes;
>
>                 for ( ; bytes; idx++, bvec_idx++) {
> -                       struct bio_vec bv = {
> -                               .bv_page = pages[idx],
> -                               .bv_len = min_t(int, bytes, PAGE_SIZE - start),
> -                               .bv_offset = start,
> -                       };
> -
> -                       bvecs[bvec_idx] = bv;
> -                       bytes -= bv.bv_len;
> +                       int len = min_t(int, bytes, PAGE_SIZE - start);
> +
> +                       bvec_set_page(&bvecs[bvec_idx], pages[idx], len, start);
> +                       bytes -= len;
>                         start = 0;
>                 }
>         }
> --
> 2.39.0
>

Reviewed-by: Ilya Dryomov <idryomov@gmail.com>

Thanks,

                Ilya

Re: add bvec initialization helpers v2

[Jens Axboe]

On Fri, 03 Feb 2023 16:06:11 +0100, Christoph Hellwig wrote:
> this series adds the helpers to initalize a bvec.  These remove open coding of
> bvec internals and help with experimenting with other representations like
> a phys_addr_t instead of page + offset.
> 
> Changes since v1:
>  - fix a typo
>  - simplify the code in ceph's __iter_get_bvecs a little bit further
>  - fix two subject prefixes
> 
> [...]

Applied, thanks!

[01/23] block: factor out a bvec_set_page helper
        commit: d58cdfae6a22e5079656c487aad669597a0635c8
[02/23] block: add a bvec_set_folio helper
        commit: 26db5ee158510108c819aa7be6eb8c75accf85d7
[03/23] block: add a bvec_set_virt helper
        commit: 666e6550cb74e3a7206b5699409c9f31e123887e
[04/23] sd: factor out a sd_set_special_bvec helper
        commit: f1e117cbb01a38f764db2f292174b93eab7c2db2
[05/23] target: use bvec_set_page to initialize bvecs
        commit: 3c7ebe952fefb646c56b60f1c3e3388f3b938cc7
[06/23] nvmet: use bvec_set_page to initialize bvecs
        commit: fc41c97a3a7b08131e6998bc7692f95729f9d359
[07/23] nvme: use bvec_set_virt to initialize special_vec
        commit: 4bee16daf13225d6b109bb95d613fd691b04a757
[08/23] rbd: use bvec_set_page to initialize the copy up bvec
        commit: 7df2af0bb4912cf360045d065f88fe4ed2f702ca
[09/23] virtio_blk: use bvec_set_virt to initialize special_vec
        commit: b831f3a1031664ae2443bab63d35c416ed30c91d
[10/23] zram: use bvec_set_page to initialize bvecs
        commit: 13ae4db0c05107814db4e774856aa83e72e8bf04
[11/23] afs: use bvec_set_folio to initialize a bvec
        commit: a8173be1863e57393edb5c158860ec43a1f21ed7
[12/23] ceph: use bvec_set_page to initialize a bvec
        commit: 5c6542b6612f635eaa001c54af22018f1e996418
[13/23] cifs: use bvec_set_page to initialize bvecs
        commit: 220ae4a5c2ba10333b3b01fbf3dea0d759e77a76
[14/23] coredump: use bvec_set_page to initialize a bvec
        commit: cd598003206839ed1354902805b52c3a4f6ead2e
[15/23] nfs: use bvec_set_page to initialize bvecs
        commit: 8bb7cd842c44b299586bfed6aadde8863c48b415
[16/23] orangefs: use bvec_set_{page,folio} to initialize bvecs
        commit: 8ead80b2c5f8c59d6ca18cd7fb582a3ffc7ea5b7
[17/23] splice: use bvec_set_page to initialize a bvec
        commit: 664e40789abaad892737a696102052dae199a029
[18/23] io_uring: use bvec_set_page to initialize a bvec
        commit: cc342a21930f0e3862c5fd0871cd5a65c5b59e27
[19/23] swap: use bvec_set_page to initialize bvecs
        commit: 8976fa6d79d70502181fa16b5e023645c0f44ec4
[20/23] rxrpc: use bvec_set_page to initialize a bvec
        commit: efde918ac66958c568926120841e7692b1e9bd9d
[21/23] sunrpc: use bvec_set_page to initialize bvecs
        commit: 9088151f1bfe670ae9e28b77095f974196bb2343
[22/23] vringh: use bvec_set_page to initialize a bvec
        commit: 58dfe14073846e416d5b3595314a4f37e1a89c50
[23/23] libceph: use bvec_set_page to initialize bvecs
        commit: 1eb9cd15004fa91b6d1911af9fbaff299d8e9e45

Best regards,
-- 
Jens Axboe