From: Breno Leitao <[email protected]>
To: Jonathan Corbet <[email protected]>, Jens Axboe <[email protected]>,
Pavel Begunkov <[email protected]>,
"David S. Miller" <[email protected]>,
Eric Dumazet <[email protected]>,
Jakub Kicinski <[email protected]>, Paolo Abeni <[email protected]>
Cc: [email protected], Arnd Bergmann <[email protected]>,
Greg Kroah-Hartman <[email protected]>,
Steve French <[email protected]>,
Lu Baolu <[email protected]>,
Jiri Slaby <[email protected]>,
Stephen Hemminger <[email protected]>,
Jason Gunthorpe <[email protected]>, Simon Ser <[email protected]>,
[email protected] (open list:DOCUMENTATION),
[email protected] (open list),
[email protected] (open list:IO_URING),
[email protected] (open list:NETWORKING [GENERAL])
Subject: [PATCH] io_uring: Add io_uring command support for sockets
Date: Wed, 21 Jun 2023 16:21:26 -0700 [thread overview]
Message-ID: <[email protected]> (raw)
Enable io_uring commands on network sockets. Create two new
SOCKET_URING_OP commands that will operate on sockets. Since these
commands are similar to ioctl, uses the _IO{R,W} helpers to embedded the
argument size and operation direction. Also allocates a unused ioctl
chunk for uring command usage.
In order to call ioctl on sockets, use the file_operations->uring_cmd
callbacks, and map it to a uring socket function, which handles the
SOCKET_URING_OP accordingly, and calls socket ioctls.
This patches was tested by creating a new test case in liburing.
Link: https://github.com/leitao/liburing/commit/3340908b742c6a26f662a0679c4ddf9df84ef431
Signed-off-by: Breno Leitao <[email protected]>
---
.../userspace-api/ioctl/ioctl-number.rst | 1 +
include/linux/io_uring.h | 6 +++++
include/uapi/linux/io_uring.h | 6 +++++
io_uring/uring_cmd.c | 27 +++++++++++++++++++
net/socket.c | 2 ++
5 files changed, 42 insertions(+)
diff --git a/Documentation/userspace-api/ioctl/ioctl-number.rst b/Documentation/userspace-api/ioctl/ioctl-number.rst
index 4f7b23faebb9..23348636f2ef 100644
--- a/Documentation/userspace-api/ioctl/ioctl-number.rst
+++ b/Documentation/userspace-api/ioctl/ioctl-number.rst
@@ -361,6 +361,7 @@ Code Seq# Include File Comments
0xCB 00-1F CBM serial IEC bus in development:
<mailto:[email protected]>
0xCC 00-0F drivers/misc/ibmvmc.h pseries VMC driver
+0xCC A0-BF uapi/linux/io_uring.h io_uring cmd subsystem
0xCD 01 linux/reiserfs_fs.h
0xCE 01-02 uapi/linux/cxl_mem.h Compute Express Link Memory Devices
0xCF 02 fs/smb/client/cifs_ioctl.h
diff --git a/include/linux/io_uring.h b/include/linux/io_uring.h
index 7fe31b2cd02f..d1b20e2a9fb0 100644
--- a/include/linux/io_uring.h
+++ b/include/linux/io_uring.h
@@ -71,6 +71,7 @@ static inline void io_uring_free(struct task_struct *tsk)
if (tsk->io_uring)
__io_uring_free(tsk);
}
+int uring_sock_cmd(struct io_uring_cmd *cmd, unsigned int issue_flags);
#else
static inline int io_uring_cmd_import_fixed(u64 ubuf, unsigned long len, int rw,
struct iov_iter *iter, void *ioucmd)
@@ -102,6 +103,11 @@ static inline const char *io_uring_get_opcode(u8 opcode)
{
return "";
}
+static inline int uring_sock_cmd(struct io_uring_cmd *cmd,
+ unsigned int issue_flags)
+{
+ return -EOPNOTSUPP;
+}
#endif
#endif
diff --git a/include/uapi/linux/io_uring.h b/include/uapi/linux/io_uring.h
index 0716cb17e436..e20ba410859d 100644
--- a/include/uapi/linux/io_uring.h
+++ b/include/uapi/linux/io_uring.h
@@ -703,6 +703,12 @@ struct io_uring_recvmsg_out {
__u32 flags;
};
+/*
+ * Argument for IORING_OP_URING_CMD when file is a socket
+ */
+#define SOCKET_URING_OP_SIOCINQ _IOR(0xcc, 0xa0, int)
+#define SOCKET_URING_OP_SIOCOUTQ _IOR(0xcc, 0xa1, int)
+
#ifdef __cplusplus
}
#endif
diff --git a/io_uring/uring_cmd.c b/io_uring/uring_cmd.c
index 5e32db48696d..dcbe6493b03f 100644
--- a/io_uring/uring_cmd.c
+++ b/io_uring/uring_cmd.c
@@ -7,6 +7,7 @@
#include <linux/nospec.h>
#include <uapi/linux/io_uring.h>
+#include <uapi/asm-generic/ioctls.h>
#include "io_uring.h"
#include "rsrc.h"
@@ -156,3 +157,29 @@ int io_uring_cmd_import_fixed(u64 ubuf, unsigned long len, int rw,
return io_import_fixed(rw, iter, req->imu, ubuf, len);
}
EXPORT_SYMBOL_GPL(io_uring_cmd_import_fixed);
+
+int uring_sock_cmd(struct io_uring_cmd *cmd, unsigned int issue_flags)
+{
+ struct socket *sock = cmd->file->private_data;
+ struct sock *sk = sock->sk;
+ int ret, arg = 0;
+
+ if (!sk->sk_prot || !sk->sk_prot->ioctl)
+ return -EOPNOTSUPP;
+
+ switch (cmd->sqe->cmd_op) {
+ case SOCKET_URING_OP_SIOCINQ:
+ ret = sk->sk_prot->ioctl(sk, SIOCINQ, &arg);
+ if (ret)
+ return ret;
+ return arg;
+ case SOCKET_URING_OP_SIOCOUTQ:
+ ret = sk->sk_prot->ioctl(sk, SIOCOUTQ, &arg);
+ if (ret)
+ return ret;
+ return arg;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+EXPORT_SYMBOL_GPL(uring_sock_cmd);
diff --git a/net/socket.c b/net/socket.c
index b778fc03c6e0..db11e94d2259 100644
--- a/net/socket.c
+++ b/net/socket.c
@@ -88,6 +88,7 @@
#include <linux/xattr.h>
#include <linux/nospec.h>
#include <linux/indirect_call_wrapper.h>
+#include <linux/io_uring.h>
#include <linux/uaccess.h>
#include <asm/unistd.h>
@@ -159,6 +160,7 @@ static const struct file_operations socket_file_ops = {
#ifdef CONFIG_COMPAT
.compat_ioctl = compat_sock_ioctl,
#endif
+ .uring_cmd = uring_sock_cmd,
.mmap = sock_mmap,
.release = sock_close,
.fasync = sock_fasync,
--
2.34.1
next reply other threads:[~2023-06-21 23:22 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-21 23:21 Breno Leitao [this message]
2023-06-22 5:20 ` [PATCH] io_uring: Add io_uring command support for sockets Greg Kroah-Hartman
2023-06-22 15:02 ` Breno Leitao
2023-06-22 16:10 ` Greg Kroah-Hartman
2023-06-22 16:38 ` Breno Leitao
2023-06-22 17:03 ` Greg Kroah-Hartman
2023-06-22 17:39 ` Jakub Kicinski
2023-06-22 19:01 ` Breno Leitao
2023-06-22 18:57 ` Breno Leitao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox