[PATCH 3/8] iomap: treat a write through cache the same as FUA

[Jens Axboe <axboe@kernel.dk>]

Whether we have a write back cache and are using FUA or don't have
a write back cache at all is the same situation. Treat them the same.

This makes the IOMAP_DIO_WRITE_FUA name a bit misleading, as we have
two cases that provide stable writes:

1) Volatile write cache with FUA writes
2) Normal write without a volatile write cache

Rename that flag to IOMAP_DIO_STABLE_WRITE to make that clearer, and
update some of the FUA comments as well.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
---
 fs/iomap/direct-io.c | 29 +++++++++++++++++------------
 1 file changed, 17 insertions(+), 12 deletions(-)

diff --git a/fs/iomap/direct-io.c b/fs/iomap/direct-io.c
index c654612b24e5..9f97d0d03724 100644
--- a/fs/iomap/direct-io.c
+++ b/fs/iomap/direct-io.c
@@ -21,7 +21,7 @@
  * iomap.h:
  */
 #define IOMAP_DIO_INLINE_COMP	(1 << 27)
-#define IOMAP_DIO_WRITE_FUA	(1 << 28)
+#define IOMAP_DIO_STABLE_WRITE	(1 << 28)
 #define IOMAP_DIO_NEED_SYNC	(1 << 29)
 #define IOMAP_DIO_WRITE		(1 << 30)
 #define IOMAP_DIO_DIRTY		(1 << 31)
@@ -222,7 +222,7 @@ static void iomap_dio_zero(const struct iomap_iter *iter, struct iomap_dio *dio,
 /*
  * Figure out the bio's operation flags from the dio request, the
  * mapping, and whether or not we want FUA.  Note that we can end up
- * clearing the WRITE_FUA flag in the dio request.
+ * clearing the STABLE_WRITE flag in the dio request.
  */
 static inline blk_opf_t iomap_dio_bio_opflags(struct iomap_dio *dio,
 		const struct iomap *iomap, bool use_fua)
@@ -236,7 +236,7 @@ static inline blk_opf_t iomap_dio_bio_opflags(struct iomap_dio *dio,
 	if (use_fua)
 		opflags |= REQ_FUA;
 	else
-		dio->flags &= ~IOMAP_DIO_WRITE_FUA;
+		dio->flags &= ~IOMAP_DIO_STABLE_WRITE;
 
 	return opflags;
 }
@@ -276,11 +276,13 @@ static loff_t iomap_dio_bio_iter(const struct iomap_iter *iter,
 		 * Use a FUA write if we need datasync semantics, this is a pure
 		 * data IO that doesn't require any metadata updates (including
 		 * after IO completion such as unwritten extent conversion) and
-		 * the underlying device supports FUA. This allows us to avoid
-		 * cache flushes on IO completion.
+		 * the underlying device either supports FUA or doesn't have
+		 * a volatile write cache. This allows us to avoid cache flushes
+		 * on IO completion.
 		 */
 		if (!(iomap->flags & (IOMAP_F_SHARED|IOMAP_F_DIRTY)) &&
-		    (dio->flags & IOMAP_DIO_WRITE_FUA) && bdev_fua(iomap->bdev))
+		    (dio->flags & IOMAP_DIO_STABLE_WRITE) &&
+		    (bdev_fua(iomap->bdev) || !bdev_write_cache(iomap->bdev)))
 			use_fua = true;
 	}
 
@@ -560,12 +562,15 @@ __iomap_dio_rw(struct kiocb *iocb, struct iov_iter *iter,
 
 		       /*
 			* For datasync only writes, we optimistically try
-			* using FUA for this IO.  Any non-FUA write that
-			* occurs will clear this flag, hence we know before
-			* completion whether a cache flush is necessary.
+			* using STABLE_WRITE for this IO. Stable writes are
+			* either FUA with a write cache, or a normal write to
+			* a device without a volatile write cache. For the
+			* former, Any non-FUA write that occurs will clear this
+			* flag, hence we know before completion whether a cache
+			* flush is necessary.
 			*/
 			if (!(iocb->ki_flags & IOCB_SYNC))
-				dio->flags |= IOMAP_DIO_WRITE_FUA;
+				dio->flags |= IOMAP_DIO_STABLE_WRITE;
 		}
 
 		/*
@@ -627,10 +632,10 @@ __iomap_dio_rw(struct kiocb *iocb, struct iov_iter *iter,
 		iomap_dio_set_error(dio, ret);
 
 	/*
-	 * If all the writes we issued were FUA, we don't need to flush the
+	 * If all the writes we issued were stable, we don't need to flush the
 	 * cache on IO completion. Clear the sync flag for this case.
 	 */
-	if (dio->flags & IOMAP_DIO_WRITE_FUA)
+	if (dio->flags & IOMAP_DIO_STABLE_WRITE)
 		dio->flags &= ~IOMAP_DIO_NEED_SYNC;
 
 	WRITE_ONCE(iocb->private, dio->submit.poll_bio);
-- 
2.40.1