From: Ming Lei <[email protected]>
To: Jens Axboe <[email protected]>,
[email protected], [email protected]
Cc: ZiyangZhang <[email protected]>,
Ming Lei <[email protected]>
Subject: [PATCH 10/10] ublk: simplify aborting request
Date: Mon, 18 Sep 2023 12:11:06 +0800 [thread overview]
Message-ID: <[email protected]> (raw)
In-Reply-To: <[email protected]>
Now ublk_abort_queue() is run exclusively with ublk_queue_rq() and the
ubq_daemon task, so simplify aborting request:
- set UBLK_IO_FLAG_ABORTED in ublk_abort_queue()
- abort request in ublk_queue_rq() if UBLK_IO_FLAG_ABORTED is observed,
and no need to check ubq_daemon any more
Signed-off-by: Ming Lei <[email protected]>
---
drivers/block/ublk_drv.c | 46 ++++++++++++----------------------------
1 file changed, 14 insertions(+), 32 deletions(-)
diff --git a/drivers/block/ublk_drv.c b/drivers/block/ublk_drv.c
index 90e0137ff784..0f54f63136fd 100644
--- a/drivers/block/ublk_drv.c
+++ b/drivers/block/ublk_drv.c
@@ -1077,13 +1077,10 @@ static void __ublk_fail_req(struct ublk_queue *ubq, struct ublk_io *io,
{
WARN_ON_ONCE(io->flags & UBLK_IO_FLAG_ACTIVE);
- if (!(io->flags & UBLK_IO_FLAG_ABORTED)) {
- io->flags |= UBLK_IO_FLAG_ABORTED;
- if (ublk_queue_can_use_recovery_reissue(ubq))
- blk_mq_requeue_request(req, false);
- else
- ublk_put_req_ref(ubq, req);
- }
+ if (ublk_queue_can_use_recovery_reissue(ubq))
+ blk_mq_requeue_request(req, false);
+ else
+ ublk_put_req_ref(ubq, req);
}
static void ubq_complete_io_cmd(struct ublk_io *io, int res,
@@ -1221,30 +1218,12 @@ static void ublk_rq_task_work_cb(struct io_uring_cmd *cmd, unsigned issue_flags)
ublk_forward_io_cmds(ubq, issue_flags);
}
-static void ublk_queue_cmd(struct ublk_queue *ubq, struct request *rq)
+static inline void ublk_queue_cmd(struct ublk_queue *ubq, struct request *rq)
{
struct ublk_rq_data *data = blk_mq_rq_to_pdu(rq);
- struct ublk_io *io;
-
- if (!llist_add(&data->node, &ubq->io_cmds))
- return;
- io = &ubq->ios[rq->tag];
- /*
- * If the check pass, we know that this is a re-issued request aborted
- * previously in exit notifier because the ubq_daemon(cmd's task) is
- * PF_EXITING. We cannot call io_uring_cmd_complete_in_task() anymore
- * because this ioucmd's io_uring context may be freed now if no inflight
- * ioucmd exists. Otherwise we may cause null-deref in ctx->fallback_work.
- *
- * Note: exit notifier sets UBLK_IO_FLAG_ABORTED and ends this request(releasing
- * the tag). Then the request is re-started(allocating the tag) and we are here.
- * Since releasing/allocating a tag implies smp_mb(), finding UBLK_IO_FLAG_ABORTED
- * guarantees that here is a re-issued request aborted previously.
- */
- if (unlikely(io->flags & UBLK_IO_FLAG_ABORTED)) {
- ublk_abort_io_cmds(ubq);
- } else {
+ if (llist_add(&data->node, &ubq->io_cmds)) {
+ struct ublk_io *io = &ubq->ios[rq->tag];
struct io_uring_cmd *cmd = io->cmd;
struct ublk_uring_cmd_pdu *pdu = ublk_get_uring_cmd_pdu(cmd);
@@ -1274,6 +1253,7 @@ static blk_status_t ublk_queue_rq(struct blk_mq_hw_ctx *hctx,
{
struct ublk_queue *ubq = hctx->driver_data;
struct request *rq = bd->rq;
+ struct ublk_io *io = &ubq->ios[rq->tag];
blk_status_t res;
/* fill iod to slot in io cmd buffer */
@@ -1293,13 +1273,12 @@ static blk_status_t ublk_queue_rq(struct blk_mq_hw_ctx *hctx,
if (ublk_queue_can_use_recovery(ubq) && unlikely(ubq->force_abort))
return BLK_STS_IOERR;
- blk_mq_start_request(bd->rq);
-
- if (unlikely(ubq_daemon_is_dying(ubq))) {
+ if (unlikely(io->flags & UBLK_IO_FLAG_ABORTED)) {
__ublk_abort_rq(ubq, rq);
return BLK_STS_OK;
}
+ blk_mq_start_request(bd->rq);
ublk_queue_cmd(ubq, rq);
return BLK_STS_OK;
@@ -1429,6 +1408,9 @@ static void ublk_abort_queue(struct ublk_device *ub, struct ublk_queue *ubq)
for (i = 0; i < ubq->q_depth; i++) {
struct ublk_io *io = &ubq->ios[i];
+ if (!(io->flags & UBLK_IO_FLAG_ABORTED))
+ io->flags |= UBLK_IO_FLAG_ABORTED;
+
if (!(io->flags & UBLK_IO_FLAG_ACTIVE)) {
struct request *rq;
@@ -1437,7 +1419,7 @@ static void ublk_abort_queue(struct ublk_device *ub, struct ublk_queue *ubq)
* will do it
*/
rq = blk_mq_tag_to_rq(ub->tag_set.tags[ubq->q_id], i);
- if (rq)
+ if (rq && blk_mq_request_started(rq))
__ublk_fail_req(ubq, io, rq);
}
}
--
2.40.1
next prev parent reply other threads:[~2023-09-18 4:13 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-18 4:10 [PATCH 00/10] io_uring/ublk: exit notifier support Ming Lei
2023-09-18 4:10 ` [PATCH 01/10] io_uring: allocate ctx id and build map between id and ctx Ming Lei
2023-09-18 4:10 ` [PATCH 02/10] io_uring: pass io_uring_ctx->id to uring_cmd Ming Lei
2023-09-18 4:10 ` [PATCH 03/10] io_uring: support io_uring notifier for uring_cmd Ming Lei
2023-09-18 4:11 ` [PATCH 04/10] ublk: don't get ublk device reference in ublk_abort_queue() Ming Lei
2023-09-18 4:11 ` [PATCH 05/10] ublk: make sure ublk uring cmd handling is done in submitter task context Ming Lei
2023-09-18 4:11 ` [PATCH 06/10] ublk: make sure that uring cmd aiming at same queue won't cross io_uring contexts Ming Lei
2023-09-18 4:11 ` [PATCH 07/10] ublk: rename mm_lock as lock Ming Lei
2023-09-18 4:11 ` [PATCH 08/10] ublk: quiesce request queue when aborting queue Ming Lei
2023-09-18 4:11 ` [PATCH 09/10] ublk: replace monitor work with uring_cmd exit notifier Ming Lei
2023-09-18 4:11 ` Ming Lei [this message]
2023-09-18 12:54 ` [PATCH 00/10] io_uring/ublk: exit notifier support Jens Axboe
2023-09-18 13:24 ` Ming Lei
2023-09-18 14:15 ` Jens Axboe
2023-09-18 16:02 ` Ming Lei
2023-09-18 16:03 ` Jens Axboe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox