From: Jens Axboe <[email protected]>
To: [email protected]
Cc: Jens Axboe <[email protected]>
Subject: [PATCH 2/4] io_uring: implement our own schedule timeout handling
Date: Thu, 15 Feb 2024 09:06:57 -0700 [thread overview]
Message-ID: <[email protected]> (raw)
In-Reply-To: <[email protected]>
In preparation for having two distinct timeouts and avoid waking the
task if we don't need to.
Signed-off-by: Jens Axboe <[email protected]>
---
io_uring/io_uring.c | 39 +++++++++++++++++++++++++++++++++++----
io_uring/io_uring.h | 2 ++
2 files changed, 37 insertions(+), 4 deletions(-)
diff --git a/io_uring/io_uring.c b/io_uring/io_uring.c
index 8f52acc14ebc..ebc646ad6acf 100644
--- a/io_uring/io_uring.c
+++ b/io_uring/io_uring.c
@@ -2488,7 +2488,7 @@ static int io_wake_function(struct wait_queue_entry *curr, unsigned int mode,
* Cannot safely flush overflowed CQEs from here, ensure we wake up
* the task, and the next invocation will do it.
*/
- if (io_should_wake(iowq) || io_has_work(iowq->ctx))
+ if (io_should_wake(iowq) || io_has_work(iowq->ctx) || iowq->hit_timeout)
return autoremove_wake_function(curr, mode, wake_flags, key);
return -1;
}
@@ -2516,6 +2516,37 @@ static bool current_pending_io(void)
return percpu_counter_read_positive(&tctx->inflight);
}
+static enum hrtimer_restart io_cqring_timer_wakeup(struct hrtimer *timer)
+{
+ struct io_wait_queue *iowq = container_of(timer, struct io_wait_queue, t);
+ struct io_ring_ctx *ctx = iowq->ctx;
+
+ WRITE_ONCE(iowq->hit_timeout, 1);
+ if (ctx->flags & IORING_SETUP_DEFER_TASKRUN)
+ wake_up_process(ctx->submitter_task);
+ else
+ io_cqring_wake(ctx);
+ return HRTIMER_NORESTART;
+}
+
+static int io_cqring_schedule_timeout(struct io_wait_queue *iowq)
+{
+ iowq->hit_timeout = 0;
+ hrtimer_init_on_stack(&iowq->t, CLOCK_MONOTONIC, HRTIMER_MODE_ABS);
+ iowq->t.function = io_cqring_timer_wakeup;
+ hrtimer_set_expires_range_ns(&iowq->t, iowq->timeout, 0);
+ hrtimer_start_expires(&iowq->t, HRTIMER_MODE_ABS);
+
+ if (!READ_ONCE(iowq->hit_timeout))
+ schedule();
+
+ hrtimer_cancel(&iowq->t);
+ destroy_hrtimer_on_stack(&iowq->t);
+ __set_current_state(TASK_RUNNING);
+
+ return READ_ONCE(iowq->hit_timeout) ? -ETIME : 0;
+}
+
static int __io_cqring_wait_schedule(struct io_ring_ctx *ctx,
struct io_wait_queue *iowq)
{
@@ -2529,10 +2560,10 @@ static int __io_cqring_wait_schedule(struct io_ring_ctx *ctx,
io_wait = current->in_iowait;
if (current_pending_io())
current->in_iowait = 1;
- if (iowq->timeout == KTIME_MAX)
+ if (iowq->timeout != KTIME_MAX)
+ ret = io_cqring_schedule_timeout(iowq);
+ else
schedule();
- else if (!schedule_hrtimeout(&iowq->timeout, HRTIMER_MODE_ABS))
- ret = -ETIME;
current->in_iowait = io_wait;
return ret;
}
diff --git a/io_uring/io_uring.h b/io_uring/io_uring.h
index 6426ee382276..9d1045bdc505 100644
--- a/io_uring/io_uring.h
+++ b/io_uring/io_uring.h
@@ -40,7 +40,9 @@ struct io_wait_queue {
struct io_ring_ctx *ctx;
unsigned cq_tail;
unsigned nr_timeouts;
+ int hit_timeout;
ktime_t timeout;
+ struct hrtimer t;
#ifdef CONFIG_NET_RX_BUSY_POLL
unsigned int napi_busy_poll_to;
--
2.43.0
next prev parent reply other threads:[~2024-02-15 16:10 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-15 16:06 [PATCHSET v2 0/4] Add support for batched min timeout Jens Axboe
2024-02-15 16:06 ` [PATCH 1/4] io_uring: move schedule wait logic into helper Jens Axboe
2024-02-15 16:06 ` Jens Axboe [this message]
2024-02-15 16:06 ` [PATCH 3/4] io_uring: add support for batch wait timeout Jens Axboe
2024-02-15 16:06 ` [PATCH 4/4] io_uring: wire up min batch wake timeout Jens Axboe
-- strict thread matches above, loose matches on Subject: below --
2024-02-13 19:03 [PATCHSET 0/4] Add support for batched min timeout Jens Axboe
2024-02-13 19:03 ` [PATCH 2/4] io_uring: implement our own schedule timeout handling Jens Axboe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
[email protected] \
[email protected] \
[email protected] \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox