From: Jens Axboe <[email protected]>
To: [email protected]
Cc: Jens Axboe <[email protected]>,
[email protected]
Subject: [PATCH 2/2] io_uring: clear opcode specific data for an early failure
Date: Sat, 16 Mar 2024 11:29:35 -0600 [thread overview]
Message-ID: <[email protected]> (raw)
In-Reply-To: <[email protected]>
If failure happens before the opcode prep handler is called, ensure that
we clear the opcode specific area of the request, which holds data
specific to that request type. This prevents errors where opcode
handlers either don't get to clear per-request private data since prep
isn't even called.
Reported-and-tested-by: [email protected]
Signed-off-by: Jens Axboe <[email protected]>
---
io_uring/io_uring.c | 25 ++++++++++++++++---------
1 file changed, 16 insertions(+), 9 deletions(-)
diff --git a/io_uring/io_uring.c b/io_uring/io_uring.c
index 3ae4bb988906..5d4b448fdc50 100644
--- a/io_uring/io_uring.c
+++ b/io_uring/io_uring.c
@@ -2181,6 +2181,13 @@ static void io_init_req_drain(struct io_kiocb *req)
}
}
+static __cold int io_init_fail_req(struct io_kiocb *req, int err)
+{
+ /* ensure per-opcode data is cleared if we fail before prep */
+ memset(&req->cmd.data, 0, sizeof(req->cmd.data));
+ return err;
+}
+
static int io_init_req(struct io_ring_ctx *ctx, struct io_kiocb *req,
const struct io_uring_sqe *sqe)
__must_hold(&ctx->uring_lock)
@@ -2202,29 +2209,29 @@ static int io_init_req(struct io_ring_ctx *ctx, struct io_kiocb *req,
if (unlikely(opcode >= IORING_OP_LAST)) {
req->opcode = 0;
- return -EINVAL;
+ return io_init_fail_req(req, -EINVAL);
}
def = &io_issue_defs[opcode];
if (unlikely(sqe_flags & ~SQE_COMMON_FLAGS)) {
/* enforce forwards compatibility on users */
if (sqe_flags & ~SQE_VALID_FLAGS)
- return -EINVAL;
+ return io_init_fail_req(req, -EINVAL);
if (sqe_flags & IOSQE_BUFFER_SELECT) {
if (!def->buffer_select)
- return -EOPNOTSUPP;
+ return io_init_fail_req(req, -EOPNOTSUPP);
req->buf_index = READ_ONCE(sqe->buf_group);
}
if (sqe_flags & IOSQE_CQE_SKIP_SUCCESS)
ctx->drain_disabled = true;
if (sqe_flags & IOSQE_IO_DRAIN) {
if (ctx->drain_disabled)
- return -EOPNOTSUPP;
+ return io_init_fail_req(req, -EOPNOTSUPP);
io_init_req_drain(req);
}
}
if (unlikely(ctx->restricted || ctx->drain_active || ctx->drain_next)) {
if (ctx->restricted && !io_check_restriction(ctx, req, sqe_flags))
- return -EACCES;
+ return io_init_fail_req(req, -EACCES);
/* knock it to the slow queue path, will be drained there */
if (ctx->drain_active)
req->flags |= REQ_F_FORCE_ASYNC;
@@ -2237,9 +2244,9 @@ static int io_init_req(struct io_ring_ctx *ctx, struct io_kiocb *req,
}
if (!def->ioprio && sqe->ioprio)
- return -EINVAL;
+ return io_init_fail_req(req, -EINVAL);
if (!def->iopoll && (ctx->flags & IORING_SETUP_IOPOLL))
- return -EINVAL;
+ return io_init_fail_req(req, -EINVAL);
if (def->needs_file) {
struct io_submit_state *state = &ctx->submit_state;
@@ -2263,12 +2270,12 @@ static int io_init_req(struct io_ring_ctx *ctx, struct io_kiocb *req,
req->creds = xa_load(&ctx->personalities, personality);
if (!req->creds)
- return -EINVAL;
+ return io_init_fail_req(req, -EINVAL);
get_cred(req->creds);
ret = security_uring_override_creds(req->creds);
if (ret) {
put_cred(req->creds);
- return ret;
+ return io_init_fail_req(req, ret);
}
req->flags |= REQ_F_CREDS;
}
--
2.43.0
prev parent reply other threads:[~2024-03-16 17:31 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-16 17:29 [PATCHSET 0/2] Sanitize request setup Jens Axboe
2024-03-16 17:29 ` [PATCH 1/2] io_uring/net: ensure async prep handlers always initialize ->done_io Jens Axboe
2024-03-16 17:29 ` Jens Axboe [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox