From: Anuj Gupta <[email protected]>
To: [email protected], [email protected], [email protected],
[email protected], [email protected],
[email protected], [email protected], [email protected],
[email protected]
Cc: [email protected], [email protected],
[email protected], [email protected],
[email protected], [email protected],
[email protected], Anuj Gupta <[email protected]>
Subject: [PATCH v8 00/10] Read/Write with meta/integrity
Date: Wed, 6 Nov 2024 17:48:32 +0530 [thread overview]
Message-ID: <[email protected]> (raw)
In-Reply-To: CGME20241106122631epcas5p2575c59b7634e0077f8e5c654b5fd5dbb@epcas5p2.samsung.com
Hi Jens,
Please consider this series for inclusion.
This adds a new io_uring interface to exchange additional integrity/pi
metadata with read/write.
The patchset is on top of block/for-next.
Interface:
A new ext_cap field is introduced in SQE, which describes the type of extended
capability. Currently one type "EXT_CAP_PI" is supported. This ext_cap requires
application to setup a SQE128 ring. Application can use the second SQE to
pass following PI informaion:
* pi_flags: Three flags are exposed for integrity checks,
namely IO_INTEGRITY_CHK_GUARD/APPTAG/REFTAG.
* len: length of the meta buffer
* addr: address of the meta buffer
* seed: seed value for reftag remapping
* app_tag: application-specific 16b value
Block path (direct IO) , NVMe and SCSI driver are modified to support
this.
Patch 1 is an enhancement patch.
Patch 2 is required to make the bounce buffer copy back work correctly.
Patch 3 to 5 are prep patches.
Patch 6 adds the io_uring support.
Patch 7 gives us unified interface for user and kernel generated
integrity.
Patch 8 adds support in SCSI and patch 9 in NVMe.
Patch 10 adds the support for block direct IO.
Testing has been done by modifying fio to use this interface.
Example program for the interface is appended below [1].
Changes since v7:
https://lore.kernel.org/io-uring/[email protected]/
- change the sign-off order (hch)
- add a check for doing metadata completion handling only for async-io
- change meta_type name to something more meaningful (hch, keith)
- add detail description in io-uring patch (hch)
Changes since v6:
https://lore.kernel.org/linux-block/[email protected]/
- io_uring changes (bring back meta_type, move PI to the end of SQE128)
- Fix robot warnings
Changes since v5:
https://lore.kernel.org/linux-block/[email protected]/
- remove meta_type field from SQE (hch, keith)
- remove __bitwise annotation (hch)
- remove BIP_CTRL_NOCHECK from scsi (hch)
Changes since v4:
https://lore.kernel.org/linux-block/[email protected]/
- better variable names to describe bounce buffer copy back (hch)
- move defintion of flags in the same patch introducing uio_meta (hch)
- move uio_meta definition to include/linux/uio.h (hch)
- bump seed size in uio_meta to 8 bytes (martin)
- move flags definition to include/uapi/linux/fs.h (hch)
- s/meta/metadata in commit description of io-uring (hch)
- rearrange the meta fields in sqe for cleaner layout
- partial submission case is not applicable as, we are only plumbing for async case
- s/META_TYPE_INTEGRITY/META_TYPE_PI (hch, martin)
- remove unlikely branching (hch)
- Better formatting, misc cleanups, better commit descriptions, reordering commits(hch)
Changes since v3:
https://lore.kernel.org/linux-block/[email protected]/
- add reftag seed support (Martin)
- fix incorrect formatting in uio_meta (hch)
- s/IOCB_HAS_META/IOCB_HAS_METADATA (hch)
- move integrity check flags to block layer header (hch)
- add comments for BIP_CHECK_GUARD/REFTAG/APPTAG flags (hch)
- remove bio_integrity check during completion if IOCB_HAS_METADATA is set (hch)
- use goto label to get rid of duplicate error handling (hch)
- add warn_on if trying to do sync io with iocb_has_metadata flag (hch)
- remove check for disabling reftag remapping (hch)
- remove BIP_INTEGRITY_USER flag (hch)
- add comment for app_tag field introduced in bio_integrity_payload (hch)
- pass request to nvme_set_app_tag function (hch)
- right indentation at a place in scsi patch (hch)
- move IOCB_HAS_METADATA to a separate fs patch (hch)
Changes since v2:
https://lore.kernel.org/linux-block/[email protected]/
- io_uring error handling styling (Gabriel)
- add documented helper to get metadata bytes from data iter (hch)
- during clone specify "what flags to clone" rather than
"what not to clone" (hch)
- Move uio_meta defination to bio-integrity.h (hch)
- Rename apptag field to app_tag (hch)
- Change datatype of flags field in uio_meta to bitwise (hch)
- Don't introduce BIP_USER_CHK_FOO flags (hch, martin)
- Driver should rely on block layer flags instead of seeing if it is
user-passthrough (hch)
- update the scsi code for handling user-meta (hch, martin)
Changes since v1:
https://lore.kernel.org/linux-block/[email protected]/
- Do not use new opcode for meta, and also add the provision to introduce new
meta types beyond integrity (Pavel)
- Stuff IOCB_HAS_META check in need_complete_io (Jens)
- Split meta handling in NVMe into a separate handler (Keith)
- Add meta handling for __blkdev_direct_IO too (Keith)
- Don't inherit BIP_COPY_USER flag for cloned bio's (Christoph)
- Better commit descriptions (Christoph)
Changes since RFC:
- modify io_uring plumbing based on recent async handling state changes
- fixes/enhancements to correctly handle the split for meta buffer
- add flags to specify guard/reftag/apptag checks
- add support to send apptag
[1]
#define _GNU_SOURCE
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <linux/fs.h>
#include <linux/io_uring.h>
#include <linux/types.h>
#include "liburing.h"
/*
* write data/meta. read both. compare. send apptag too.
* prerequisite:
* protected xfer: format namespace with 4KB + 8b, pi_type = 1
* For testing reftag remapping on device-mapper, create a
* device-mapper and run this program. Device mapper creation:
* # echo 0 80 linear /dev/nvme0n1 0 > /tmp/table
* # echo 80 160 linear /dev/nvme0n1 200 >> /tmp/table
* # dmsetup create two /tmp/table
* # ./a.out /dev/dm-0
*/
#define DATA_LEN 4096
#define META_LEN 8
struct t10_pi_tuple {
__be16 guard;
__be16 apptag;
__be32 reftag;
};
int main(int argc, char *argv[])
{
struct io_uring ring;
struct io_uring_sqe *sqe = NULL;
struct io_uring_cqe *cqe = NULL;
void *wdb,*rdb;
char wmb[META_LEN], rmb[META_LEN];
char *data_str = "data buffer";
int fd, ret, blksize;
struct stat fstat;
unsigned long long offset = DATA_LEN * 10;
struct t10_pi_tuple *pi;
struct io_uring_sqe_ext *sqe_ext;
if (argc != 2) {
fprintf(stderr, "Usage: %s <block-device>", argv[0]);
return 1;
};
if (stat(argv[1], &fstat) == 0) {
blksize = (int)fstat.st_blksize;
} else {
perror("stat");
return 1;
}
if (posix_memalign(&wdb, blksize, DATA_LEN)) {
perror("posix_memalign failed");
return 1;
}
if (posix_memalign(&rdb, blksize, DATA_LEN)) {
perror("posix_memalign failed");
return 1;
}
memset(wdb, 0, DATA_LEN);
fd = open(argv[1], O_RDWR | O_DIRECT);
if (fd < 0) {
printf("Error in opening device\n");
return 0;
}
ret = io_uring_queue_init(8, &ring, IORING_SETUP_SQE128);
if (ret) {
fprintf(stderr, "ring setup failed: %d\n", ret);
return 1;
}
/* write data + meta-buffer to device */
sqe = io_uring_get_sqe(&ring);
if (!sqe) {
fprintf(stderr, "get sqe failed\n");
return 1;
}
io_uring_prep_write(sqe, fd, wdb, DATA_LEN, offset);
sqe->ext_cap = EXT_CAP_PI;
sqe_ext= (struct io_uring_sqe_ext *) (sqe + 1);
sqe_ext->rw_pi.addr = (__u64)wmb;
sqe_ext->rw_pi.len = META_LEN;
/* flags to ask for guard/reftag/apptag*/
sqe_ext->rw_pi.flags = IO_INTEGRITY_CHK_GUARD | IO_INTEGRITY_CHK_REFTAG | IO_INTEGRITY_CHK_APPTAG;
sqe_ext->rw_pi.app_tag = 0x1234;
sqe_ext->rw_pi.seed = 10;
pi = (struct t10_pi_tuple *)wmb;
pi->guard = 0;
pi->reftag = 0x0A000000;
pi->apptag = 0x3412;
ret = io_uring_submit(&ring);
if (ret <= 0) {
fprintf(stderr, "sqe submit failed: %d\n", ret);
return 1;
}
ret = io_uring_wait_cqe(&ring, &cqe);
if (!cqe) {
fprintf(stderr, "cqe is NULL :%d\n", ret);
return 1;
}
if (cqe->res < 0) {
fprintf(stderr, "write cqe failure: %d", cqe->res);
return 1;
}
io_uring_cqe_seen(&ring, cqe);
/* read data + meta-buffer back from device */
sqe = io_uring_get_sqe(&ring);
if (!sqe) {
fprintf(stderr, "get sqe failed\n");
return 1;
}
io_uring_prep_read(sqe, fd, rdb, DATA_LEN, offset);
sqe->ext_cap = EXT_CAP_PI;
sqe_ext= (struct io_uring_sqe_ext *) (sqe + 1);
sqe_ext->rw_pi.addr = (__u64)rmb;
sqe_ext->rw_pi.len = META_LEN;
sqe_ext->rw_pi.flags = IO_INTEGRITY_CHK_GUARD | IO_INTEGRITY_CHK_REFTAG | IO_INTEGRITY_CHK_APPTAG;
sqe_ext->rw_pi.app_tag = 0x1234;
sqe_ext->rw_pi.seed = 10;
ret = io_uring_submit(&ring);
if (ret <= 0) {
fprintf(stderr, "sqe submit failed: %d\n", ret);
return 1;
}
ret = io_uring_wait_cqe(&ring, &cqe);
if (!cqe) {
fprintf(stderr, "cqe is NULL :%d\n", ret);
return 1;
}
if (cqe->res < 0) {
fprintf(stderr, "read cqe failure: %d", cqe->res);
return 1;
}
pi = (struct t10_pi_tuple *)rmb;
if (pi->apptag != 0x3412)
printf("Failure: apptag mismatch!\n");
if (pi->reftag != 0x0A000000)
printf("Failure: reftag mismatch!\n");
io_uring_cqe_seen(&ring, cqe);
pi = (struct t10_pi_tuple *)rmb;
if (strncmp(wmb, rmb, META_LEN))
printf("Failure: meta mismatch!, wmb=%s, rmb=%s\n", wmb, rmb);
if (strncmp(wdb, rdb, DATA_LEN))
printf("Failure: data mismatch!\n");
io_uring_queue_exit(&ring);
free(rdb);
free(wdb);
return 0;
}
Anuj Gupta (7):
block: define set of integrity flags to be inherited by cloned bip
block: modify bio_integrity_map_user to accept iov_iter as argument
fs, iov_iter: define meta io descriptor
fs: introduce IOCB_HAS_METADATA for metadata
io_uring/rw: add support to send metadata along with read/write
block: introduce BIP_CHECK_GUARD/REFTAG/APPTAG bip_flags
scsi: add support for user-meta interface
Christoph Hellwig (1):
block: copy back bounce buffer to user-space correctly in case of
split
Kanchan Joshi (2):
nvme: add support for passing on the application tag
block: add support to pass user meta buffer
block/bio-integrity.c | 84 +++++++++++++++++++++++++++------
block/blk-integrity.c | 10 +++-
block/fops.c | 45 ++++++++++++++----
drivers/nvme/host/core.c | 21 +++++----
drivers/scsi/sd.c | 4 +-
include/linux/bio-integrity.h | 25 +++++++---
include/linux/fs.h | 1 +
include/linux/uio.h | 9 ++++
include/uapi/linux/fs.h | 9 ++++
include/uapi/linux/io_uring.h | 34 ++++++++++++++
io_uring/io_uring.c | 8 ++++
io_uring/rw.c | 88 ++++++++++++++++++++++++++++++++++-
io_uring/rw.h | 14 +++++-
13 files changed, 306 insertions(+), 46 deletions(-)
--
2.25.1
next parent reply other threads:[~2024-11-06 14:28 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20241106122631epcas5p2575c59b7634e0077f8e5c654b5fd5dbb@epcas5p2.samsung.com>
2024-11-06 12:18 ` Anuj Gupta [this message]
[not found] ` <CGME20241106122656epcas5p2aa5c312dd186b125b7c3f1af199b46d8@epcas5p2.samsung.com>
2024-11-06 12:18 ` [PATCH v8 01/10] block: define set of integrity flags to be inherited by cloned bip Anuj Gupta
[not found] ` <CGME20241106122659epcas5p28505a2288f3ac24408aaf138ac053793@epcas5p2.samsung.com>
2024-11-06 12:18 ` [PATCH v8 02/10] block: copy back bounce buffer to user-space correctly in case of split Anuj Gupta
[not found] ` <CGME20241106122701epcas5p379d6d2c0f7a758f959e02a363ee6871d@epcas5p3.samsung.com>
2024-11-06 12:18 ` [PATCH v8 03/10] block: modify bio_integrity_map_user to accept iov_iter as argument Anuj Gupta
[not found] ` <CGME20241106122704epcas5p37a156fb2738c3b8194e8f81c26a07878@epcas5p3.samsung.com>
2024-11-06 12:18 ` [PATCH v8 04/10] fs, iov_iter: define meta io descriptor Anuj Gupta
[not found] ` <CGME20241106122707epcas5p4569e1ddc2ded4de5da6663fb7ffc9464@epcas5p4.samsung.com>
2024-11-06 12:18 ` [PATCH v8 05/10] fs: introduce IOCB_HAS_METADATA for metadata Anuj Gupta
[not found] ` <CGME20241106122710epcas5p2b314c865f8333c890dd6f22cf2edbe2f@epcas5p2.samsung.com>
2024-11-06 12:18 ` [PATCH v8 06/10] io_uring/rw: add support to send metadata along with read/write Anuj Gupta
2024-11-07 5:55 ` Christoph Hellwig
2024-11-07 7:26 ` Anuj gupta
2024-11-07 7:38 ` Christoph Hellwig
2024-11-07 10:40 ` Anuj Gupta
2024-11-07 11:44 ` Christoph Hellwig
2024-11-12 0:54 ` Pavel Begunkov
2024-11-12 6:51 ` Anuj Gupta
[not found] ` <CGME20241106122713epcas5p433c4b14f82da79176c3e8bf6835054fe@epcas5p4.samsung.com>
2024-11-06 12:18 ` [PATCH v8 07/10] block: introduce BIP_CHECK_GUARD/REFTAG/APPTAG bip_flags Anuj Gupta
[not found] ` <CGME20241106122715epcas5p1ccc25dc0bbfae6db881fecb6bd00d5e0@epcas5p1.samsung.com>
2024-11-06 12:18 ` [PATCH v8 08/10] nvme: add support for passing on the application tag Anuj Gupta
[not found] ` <CGME20241106122718epcas5p184094be8de895aa606170da9f4204ae0@epcas5p1.samsung.com>
2024-11-06 12:18 ` [PATCH v8 09/10] scsi: add support for user-meta interface Anuj Gupta
[not found] ` <CGME20241106122721epcas5p3849e3582fcb6547be2b1b10b031138d4@epcas5p3.samsung.com>
2024-11-06 12:18 ` [PATCH v8 10/10] block: add support to pass user meta buffer Anuj Gupta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox