public inbox for [email protected]
 help / color / mirror / Atom feed
From: hexue <[email protected]>
To: [email protected], [email protected]
Cc: [email protected], [email protected],
	hexue <[email protected]>
Subject: [PATCH liburing v3] test: add test cases for hybrid iopoll
Date: Fri, 15 Nov 2024 15:00:13 +0800	[thread overview]
Message-ID: <[email protected]> (raw)
In-Reply-To: CGME20241115070021epcas5p4bf0dddfd2e511f43efd4587ba408e6ed@epcas5p4.samsung.com

Add a test file for hybrid iopoll to make sure it works safe.Test case
include basic read/write tests, and run in normal iopoll mode and
passthrough mode respectively.

--
changes since v1:
- remove iopoll-hybridpoll.c
- test hybrid poll with exsiting iopoll and io_uring_passthrough
- add a misconfiguration check

changes since v2:
- modify description of man doc

Signed-off-by: hexue <[email protected]>
---
 man/io_uring_setup.2            | 10 +++++++++-
 src/include/liburing/io_uring.h |  3 +++
 test/io_uring_passthrough.c     | 14 +++++++++-----
 test/iopoll.c                   | 22 +++++++++++++---------
 4 files changed, 34 insertions(+), 15 deletions(-)

diff --git a/man/io_uring_setup.2 b/man/io_uring_setup.2
index 2f87783..f226db0 100644
--- a/man/io_uring_setup.2
+++ b/man/io_uring_setup.2
@@ -78,7 +78,15 @@ in question. For NVMe devices, the nvme driver must be loaded with the
 parameter set to the desired number of polling queues. The polling queues
 will be shared appropriately between the CPUs in the system, if the number
 is less than the number of online CPU threads.
-
+.TP
+.B IORING_SETUP_HYBRID_IOPOLL
+This flag must be used with
+.B IORING_SETUP_IOPOLL
+flag. Hybrid io polling is a feature based on iopoll, it differs from strict
+polling in that it will delay a bit before doing completion side polling, to
+avoid wasting too much CPU resources. Like
+.B IOPOLL
+, it requires that devices support polling.
 .TP
 .B IORING_SETUP_SQPOLL
 When this flag is specified, a kernel thread is created to perform
diff --git a/src/include/liburing/io_uring.h b/src/include/liburing/io_uring.h
index 20bc570..d16364c 100644
--- a/src/include/liburing/io_uring.h
+++ b/src/include/liburing/io_uring.h
@@ -200,6 +200,9 @@ enum io_uring_sqe_flags_bit {
  */
 #define IORING_SETUP_NO_SQARRAY		(1U << 16)
 
+/* Use hybrid poll in iopoll process */
+#define IORING_SETUP_HYBRID_IOPOLL      (1U << 17)
+
 enum io_uring_op {
 	IORING_OP_NOP,
 	IORING_OP_READV,
diff --git a/test/io_uring_passthrough.c b/test/io_uring_passthrough.c
index f18a186..bea4f39 100644
--- a/test/io_uring_passthrough.c
+++ b/test/io_uring_passthrough.c
@@ -254,7 +254,7 @@ err:
 }
 
 static int test_io(const char *file, int tc, int read, int sqthread,
-		   int fixed, int nonvec)
+		   int fixed, int nonvec, int hybrid)
 {
 	struct io_uring ring;
 	int ret, ring_flags = 0;
@@ -265,6 +265,9 @@ static int test_io(const char *file, int tc, int read, int sqthread,
 	if (sqthread)
 		ring_flags |= IORING_SETUP_SQPOLL;
 
+	if (hybrid)
+		ring_flags |= IORING_SETUP_IOPOLL | IORING_SETUP_HYBRID_IOPOLL;
+
 	ret = t_create_ring(64, &ring, ring_flags);
 	if (ret == T_SETUP_SKIP)
 		return 0;
@@ -449,18 +452,19 @@ int main(int argc, char *argv[])
 
 	vecs = t_create_buffers(BUFFERS, BS);
 
-	for (i = 0; i < 16; i++) {
+	for (i = 0; i < 32; i++) {
 		int read = (i & 1) != 0;
 		int sqthread = (i & 2) != 0;
 		int fixed = (i & 4) != 0;
 		int nonvec = (i & 8) != 0;
+		int hybrid = (i & 16) != 0;
 
-		ret = test_io(fname, i, read, sqthread, fixed, nonvec);
+		ret = test_io(fname, i, read, sqthread, fixed, nonvec, hybrid);
 		if (no_pt)
 			break;
 		if (ret) {
-			fprintf(stderr, "test_io failed %d/%d/%d/%d\n",
-				read, sqthread, fixed, nonvec);
+			fprintf(stderr, "test_io failed %d/%d/%d/%d/%d\n",
+				read, sqthread, fixed, nonvec, hybrid);
 			goto err;
 		}
 	}
diff --git a/test/iopoll.c b/test/iopoll.c
index 2e0f7ea..5ff26a4 100644
--- a/test/iopoll.c
+++ b/test/iopoll.c
@@ -351,7 +351,7 @@ ok:
 }
 
 static int test_io(const char *file, int write, int sqthread, int fixed,
-		   int buf_select, int defer)
+		   int hybrid, int buf_select, int defer)
 {
 	struct io_uring ring;
 	int ret, ring_flags = IORING_SETUP_IOPOLL;
@@ -363,6 +363,9 @@ static int test_io(const char *file, int write, int sqthread, int fixed,
 		ring_flags |= IORING_SETUP_SINGLE_ISSUER |
 			      IORING_SETUP_DEFER_TASKRUN;
 
+	if (hybrid)
+		ring_flags |= IORING_SETUP_HYBRID_IOPOLL;
+
 	ret = t_create_ring(64, &ring, ring_flags);
 	if (ret == T_SETUP_SKIP)
 		return 0;
@@ -418,22 +421,23 @@ int main(int argc, char *argv[])
 
 	vecs = t_create_buffers(BUFFERS, BS);
 
-	nr = 32;
+	nr = 64;
 	if (no_buf_select)
-		nr = 8;
-	else if (!t_probe_defer_taskrun())
 		nr = 16;
+	else if (!t_probe_defer_taskrun())
+		nr = 32;
 	for (i = 0; i < nr; i++) {
 		int write = (i & 1) != 0;
 		int sqthread = (i & 2) != 0;
 		int fixed = (i & 4) != 0;
-		int buf_select = (i & 8) != 0;
-		int defer = (i & 16) != 0;
+		int hybrid = (i & 8) != 0;
+		int buf_select = (i & 16) != 0;
+		int defer = (i & 32) != 0;
 
-		ret = test_io(fname, write, sqthread, fixed, buf_select, defer);
+		ret = test_io(fname, write, sqthread, fixed, hybrid, buf_select, defer);
 		if (ret) {
-			fprintf(stderr, "test_io failed %d/%d/%d/%d/%d\n",
-				write, sqthread, fixed, buf_select, defer);
+			fprintf(stderr, "test_io failed %d/%d/%d/%d/%d/%d\n",
+				write, sqthread, fixed, hybrid, buf_select, defer);
 			goto err;
 		}
 		if (no_iopoll)
-- 
2.34.1


       reply	other threads:[~2024-11-16  0:38 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <CGME20241115070021epcas5p4bf0dddfd2e511f43efd4587ba408e6ed@epcas5p4.samsung.com>
2024-11-15  7:00 ` hexue [this message]
2024-11-16 16:39   ` [PATCH liburing v3] test: add test cases for hybrid iopoll Jens Axboe

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    [email protected] \
    [email protected] \
    [email protected] \
    [email protected] \
    [email protected] \
    [email protected] \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox