public inbox for [email protected]
 help / color / mirror / Atom feed
From: Kanchan Joshi <[email protected]>
To: Jens Axboe <[email protected]>,
	[email protected], [email protected], [email protected],
	[email protected]
Cc: [email protected], [email protected], [email protected],
	[email protected], [email protected],
	[email protected], Anuj Gupta <[email protected]>,
	Nitesh Shetty <[email protected]>
Subject: Re: [PATCH 08/10] io_uring/rw: add support to send meta along with read/write
Date: Tue, 30 Apr 2024 01:41:32 +0530	[thread overview]
Message-ID: <[email protected]> (raw)
In-Reply-To: <[email protected]>

On 4/26/2024 7:55 PM, Jens Axboe wrote:
>> diff --git a/io_uring/rw.c b/io_uring/rw.c
>> index 3134a6ece1be..b2c9ac91d5e5 100644
>> --- a/io_uring/rw.c
>> +++ b/io_uring/rw.c
>> @@ -587,6 +623,8 @@ static int kiocb_done(struct io_kiocb *req, ssize_t ret,
>>   
>>   		req->flags &= ~REQ_F_REISSUE;
>>   		iov_iter_restore(&io->iter, &io->iter_state);
>> +		if (unlikely(rw->kiocb.ki_flags & IOCB_USE_META))
>> +			iov_iter_restore(&io->meta.iter, &io->iter_meta_state);
>>   		return -EAGAIN;
>>   	}
>>   	return IOU_ISSUE_SKIP_COMPLETE;
> This puzzles me a bit, why is the restore now dependent on
> IOCB_USE_META?

Both saving/restore for meta is under this condition (so seemed natural).
Also, to avoid growing "struct io_async_rw" too much, this patch keeps 
keeps meta/iter_meta_state in the same memory as wpq. So doing this 
unconditionally can corrupt wpq for buffered io.

>> @@ -768,7 +806,7 @@ static int io_rw_init_file(struct io_kiocb *req, fmode_t mode)
>>   	if (!(req->flags & REQ_F_FIXED_FILE))
>>   		req->flags |= io_file_get_flags(file);
>>   
>> -	kiocb->ki_flags = file->f_iocb_flags;
>> +	kiocb->ki_flags |= file->f_iocb_flags;
>>   	ret = kiocb_set_rw_flags(kiocb, rw->flags);
>>   	if (unlikely(ret))
>>   		return ret;
>> @@ -787,7 +825,8 @@ static int io_rw_init_file(struct io_kiocb *req, fmode_t mode)
>>   		if (!(kiocb->ki_flags & IOCB_DIRECT) || !file->f_op->iopoll)
>>   			return -EOPNOTSUPP;
>>   
>> -		kiocb->private = NULL;
>> +		if (likely(!(kiocb->ki_flags & IOCB_USE_META)))
>> +			kiocb->private = NULL;
>>   		kiocb->ki_flags |= IOCB_HIPRI;
>>   		kiocb->ki_complete = io_complete_rw_iopoll;
>>   		req->iopoll_completed = 0;
> 
> Why don't we just set ->private generically earlier, eg like we do for
> the ki_flags, rather than have it be a branch in here?

Not sure if I am missing what you have in mind.
But kiocb->private was set before we reached to this point (in 
io_rw_meta). So we don't overwrite that here.

>> @@ -853,7 +892,8 @@ static int __io_read(struct io_kiocb *req, unsigned int issue_flags)
>>   	} else if (ret == -EIOCBQUEUED) {
>>   		return IOU_ISSUE_SKIP_COMPLETE;
>>   	} else if (ret == req->cqe.res || ret <= 0 || !force_nonblock ||
>> -		   (req->flags & REQ_F_NOWAIT) || !need_complete_io(req)) {
>> +		   (req->flags & REQ_F_NOWAIT) || !need_complete_io(req) ||
>> +		   (kiocb->ki_flags & IOCB_USE_META)) {
>>   		/* read all, failed, already did sync or don't want to retry */
>>   		goto done;
>>   	}
> 
> Would it be cleaner to stuff that IOCB_USE_META check in
> need_complete_io(), as that would closer seem to describe why that check
> is there in the first place? With a comment.

Yes, will do.

>> @@ -864,6 +904,12 @@ static int __io_read(struct io_kiocb *req, unsigned int issue_flags)
>>   	 * manually if we need to.
>>   	 */
>>   	iov_iter_restore(&io->iter, &io->iter_state);
>> +	if (unlikely(kiocb->ki_flags & IOCB_USE_META)) {
>> +		/* don't handle partial completion for read + meta */
>> +		if (ret > 0)
>> +			goto done;
>> +		iov_iter_restore(&io->meta.iter, &io->iter_meta_state);
>> +	}
> 
> Also seems a bit odd why we need this check here, surely if this is
> needed other "don't do retry IOs" conditions would be the same?

Yes, will revisit.
>> @@ -1053,7 +1099,8 @@ int io_write(struct io_kiocb *req, unsigned int issue_flags)
>>   		if (ret2 == -EAGAIN && (req->ctx->flags & IORING_SETUP_IOPOLL))
>>   			goto ret_eagain;
>>   
>> -		if (ret2 != req->cqe.res && ret2 >= 0 && need_complete_io(req)) {
>> +		if (ret2 != req->cqe.res && ret2 >= 0 && need_complete_io(req)
>> +				&& !(kiocb->ki_flags & IOCB_USE_META)) {
>>   			trace_io_uring_short_write(req->ctx, kiocb->ki_pos - ret2,
>>   						req->cqe.res, ret2);
> 
> Same here. Would be nice to integrate this a bit nicer rather than have
> a bunch of "oh we also need this extra check here" conditions.

Will look into this too.
>> @@ -1074,12 +1121,33 @@ int io_write(struct io_kiocb *req, unsigned int issue_flags)
>>   	} else {
>>   ret_eagain:
>>   		iov_iter_restore(&io->iter, &io->iter_state);
>> +		if (unlikely(kiocb->ki_flags & IOCB_USE_META))
>> +			iov_iter_restore(&io->meta.iter, &io->iter_meta_state);
>>   		if (kiocb->ki_flags & IOCB_WRITE)
>>   			io_req_end_write(req);
>>   		return -EAGAIN;
>>   	}
>>   }
> 
> Same question here on the (now) conditional restore.

Did not get the concern. Do you prefer it unconditional.

>> +int io_rw_meta(struct io_kiocb *req, unsigned int issue_flags)
>> +{
>> +	struct io_rw *rw = io_kiocb_to_cmd(req, struct io_rw);
>> +	struct io_async_rw *io = req->async_data;
>> +	struct kiocb *kiocb = &rw->kiocb;
>> +	int ret;
>> +
>> +	if (!(req->file->f_flags & O_DIRECT))
>> +		return -EOPNOTSUPP;
> 
> Why isn't this just caught at init time when IOCB_DIRECT is checked?

io_rw_init_file() gets invoked after this, and IOCB_DIRECT check is only 
for IOPOLL situation. We want to check/fail it regardless of IOPOLL.

> 
>> +	kiocb->private = &io->meta;
>> +	if (req->opcode == IORING_OP_READ_META)
>> +		ret = io_read(req, issue_flags);
>> +	else
>> +		ret = io_write(req, issue_flags);
>> +
>> +	return ret;
>> +}
> 
> kiocb->private is a bit of an odd beast, and ownership isn't clear at
> all. It would make the most sense if the owner of the kiocb (eg io_uring
> in this case) owned it, but take a look at eg ocfs2 and see what they do
> with it... I think this would blow up as a result.

Yes, ocfs2 is making use of kiocb->private. But seems that's fine. In 
io_uring we use the field only to send the information down. ocfs2 (or 
anything else unaware of this interface) may just overwrite the 
kiocb->private.
If the lower layer want to support meta exchange, it is supposed to 
extract meta-descriptor from kiocb->private before altering it.

This case is same for block direct path too when we are doing polled io.

  reply	other threads:[~2024-04-29 20:11 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <CGME20240425184649epcas5p42f6ddbfb1c579f043a919973c70ebd03@epcas5p4.samsung.com>
2024-04-25 18:39 ` [PATCH 00/10] Read/Write with meta/integrity Kanchan Joshi
     [not found]   ` <CGME20240425184651epcas5p3404f2390d6cf05148eb96e1af093e7bc@epcas5p3.samsung.com>
2024-04-25 18:39     ` [PATCH 01/10] block: set bip_vcnt correctly Kanchan Joshi
2024-04-27  7:02       ` Christoph Hellwig
2024-04-27 14:16         ` Keith Busch
2024-04-29 10:59           ` Kanchan Joshi
2024-05-01  7:45           ` Christoph Hellwig
2024-05-01  8:03             ` Keith Busch
     [not found]   ` <CGME20240425184653epcas5p28de1473090e0141ae74f8b0a6eb921a7@epcas5p2.samsung.com>
2024-04-25 18:39     ` [PATCH 02/10] block: copy bip_max_vcnt vecs instead of bip_vcnt during clone Kanchan Joshi
2024-04-27  7:03       ` Christoph Hellwig
2024-04-29 11:28         ` Kanchan Joshi
2024-04-29 12:04           ` Keith Busch
2024-04-29 17:07             ` Christoph Hellwig
2024-04-30  8:25               ` Keith Busch
2024-05-01  7:46                 ` Christoph Hellwig
2024-05-01  7:50           ` Christoph Hellwig
     [not found]   ` <CGME20240425184656epcas5p42228cdef753cf20a266d12de5bc130f0@epcas5p4.samsung.com>
2024-04-25 18:39     ` [PATCH 03/10] block: copy result back to user meta buffer correctly in case of split Kanchan Joshi
2024-04-27  7:04       ` Christoph Hellwig
     [not found]   ` <CGME20240425184658epcas5p2adb6bf01a5c56ffaac3a55ab57afaf8e@epcas5p2.samsung.com>
2024-04-25 18:39     ` [PATCH 04/10] block: avoid unpinning/freeing the bio_vec incase of cloned bio Kanchan Joshi
2024-04-27  7:05       ` Christoph Hellwig
2024-04-29 11:40         ` Kanchan Joshi
2024-04-29 17:09           ` Christoph Hellwig
2024-05-01 13:02             ` Kanchan Joshi
2024-05-02  7:12               ` Christoph Hellwig
2024-05-03 12:01                 ` Kanchan Joshi
     [not found]   ` <CGME20240425184700epcas5p1687590f7e4a3f3c3620ac27af514f0ca@epcas5p1.samsung.com>
2024-04-25 18:39     ` [PATCH 05/10] block, nvme: modify rq_integrity_vec function Kanchan Joshi
2024-04-27  7:18       ` Christoph Hellwig
2024-04-29 11:34         ` Kanchan Joshi
2024-04-29 17:11           ` Christoph Hellwig
     [not found]   ` <CGME20240425184702epcas5p1ccb0df41b07845bc252d69007558e3fa@epcas5p1.samsung.com>
2024-04-25 18:39     ` [PATCH 06/10] block: modify bio_integrity_map_user argument Kanchan Joshi
2024-04-27  7:19       ` Christoph Hellwig
     [not found]   ` <CGME20240425184704epcas5p3b9eb6cce9c9658eb1d0d32937e778a5d@epcas5p3.samsung.com>
2024-04-25 18:39     ` [PATCH 07/10] block: define meta io descriptor Kanchan Joshi
     [not found]   ` <CGME20240425184706epcas5p1d75c19d1d1458c52fc4009f150c7dc7d@epcas5p1.samsung.com>
2024-04-25 18:39     ` [PATCH 08/10] io_uring/rw: add support to send meta along with read/write Kanchan Joshi
2024-04-26 14:25       ` Jens Axboe
2024-04-29 20:11         ` Kanchan Joshi [this message]
     [not found]   ` <CGME20240425184708epcas5p4f1d95cd8d285614f712868d205a23115@epcas5p4.samsung.com>
2024-04-25 18:39     ` [PATCH 09/10] block: add support to send meta buffer Kanchan Joshi
2024-04-26 15:21       ` Keith Busch
2024-04-29 11:47         ` Kanchan Joshi
     [not found]   ` <CGME20240425184710epcas5p2968bbc40ed10d1f0184bb511af054fcb@epcas5p2.samsung.com>
2024-04-25 18:39     ` [PATCH 10/10] nvme: add separate handling for user integrity buffer Kanchan Joshi
2024-04-25 19:56       ` Keith Busch
2024-04-26 10:57       ` kernel test robot
2024-04-26 14:19   ` [PATCH 00/10] Read/Write with meta/integrity Jens Axboe

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    [email protected] \
    [email protected] \
    [email protected] \
    [email protected] \
    [email protected] \
    [email protected] \
    [email protected] \
    [email protected] \
    [email protected] \
    [email protected] \
    [email protected] \
    [email protected] \
    [email protected] \
    [email protected] \
    [email protected] \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox