From: Pavel Begunkov <[email protected]>
To: Jens Axboe <[email protected]>,
[email protected], [email protected]
Subject: [PATCH v3 1/4] io_uring: fix {SQ,IO}POLL with unsupported opcodes
Date: Wed, 3 Jun 2020 18:03:22 +0300 [thread overview]
Message-ID: <917e992a6efc417ee1d36afb29623f577634f907.1591196426.git.asml.silence@gmail.com> (raw)
In-Reply-To: <[email protected]>
IORING_SETUP_IOPOLL is defined only for read/write, other opcodes should
be disallowed, otherwise it'll get an error as below. Also refuse
open/cloes with SQPOLL, as the polling thread wouldn't know which file
table to use.
RIP: 0010:io_iopoll_getevents+0x111/0x5a0
Call Trace:
? _raw_spin_unlock_irqrestore+0x24/0x40
? do_send_sig_info+0x64/0x90
io_iopoll_reap_events.part.0+0x5e/0xa0
io_ring_ctx_wait_and_kill+0x132/0x1c0
io_uring_release+0x20/0x30
__fput+0xcd/0x230
____fput+0xe/0x10
task_work_run+0x67/0xa0
do_exit+0x353/0xb10
? handle_mm_fault+0xd4/0x200
? syscall_trace_enter+0x18c/0x2c0
do_group_exit+0x43/0xa0
__x64_sys_exit_group+0x18/0x20
do_syscall_64+0x60/0x1e0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Signed-off-by: Pavel Begunkov <[email protected]>
---
fs/io_uring.c | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/fs/io_uring.c b/fs/io_uring.c
index 732ec73ec3c0..fc55c44dcafe 100644
--- a/fs/io_uring.c
+++ b/fs/io_uring.c
@@ -2765,6 +2765,8 @@ static int __io_splice_prep(struct io_kiocb *req,
if (req->flags & REQ_F_NEED_CLEANUP)
return 0;
+ if (unlikely(req->ctx->flags & IORING_SETUP_IOPOLL))
+ return -EINVAL;
sp->file_in = NULL;
sp->len = READ_ONCE(sqe->len);
@@ -2965,6 +2967,8 @@ static int io_fallocate_prep(struct io_kiocb *req,
{
if (sqe->ioprio || sqe->buf_index || sqe->rw_flags)
return -EINVAL;
+ if (unlikely(req->ctx->flags & IORING_SETUP_IOPOLL))
+ return -EINVAL;
req->sync.off = READ_ONCE(sqe->off);
req->sync.len = READ_ONCE(sqe->addr);
@@ -2990,6 +2994,8 @@ static int io_openat_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe)
const char __user *fname;
int ret;
+ if (unlikely(req->ctx->flags & (IORING_SETUP_IOPOLL|IORING_SETUP_SQPOLL)))
+ return -EINVAL;
if (sqe->ioprio || sqe->buf_index)
return -EINVAL;
if (req->flags & REQ_F_FIXED_FILE)
@@ -3023,6 +3029,8 @@ static int io_openat2_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe)
size_t len;
int ret;
+ if (unlikely(req->ctx->flags & (IORING_SETUP_IOPOLL|IORING_SETUP_SQPOLL)))
+ return -EINVAL;
if (sqe->ioprio || sqe->buf_index)
return -EINVAL;
if (req->flags & REQ_F_FIXED_FILE)
@@ -3105,6 +3113,8 @@ static int io_remove_buffers_prep(struct io_kiocb *req,
struct io_provide_buf *p = &req->pbuf;
u64 tmp;
+ if (unlikely(req->ctx->flags & IORING_SETUP_IOPOLL))
+ return -EINVAL;
if (sqe->ioprio || sqe->rw_flags || sqe->addr || sqe->len || sqe->off)
return -EINVAL;
@@ -3174,6 +3184,8 @@ static int io_provide_buffers_prep(struct io_kiocb *req,
struct io_provide_buf *p = &req->pbuf;
u64 tmp;
+ if (unlikely(req->ctx->flags & IORING_SETUP_IOPOLL))
+ return -EINVAL;
if (sqe->ioprio || sqe->rw_flags)
return -EINVAL;
@@ -3262,6 +3274,8 @@ static int io_epoll_ctl_prep(struct io_kiocb *req,
#if defined(CONFIG_EPOLL)
if (sqe->ioprio || sqe->buf_index)
return -EINVAL;
+ if (unlikely(req->ctx->flags & IORING_SETUP_IOPOLL))
+ return -EINVAL;
req->epoll.epfd = READ_ONCE(sqe->fd);
req->epoll.op = READ_ONCE(sqe->len);
@@ -3306,6 +3320,8 @@ static int io_madvise_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe)
#if defined(CONFIG_ADVISE_SYSCALLS) && defined(CONFIG_MMU)
if (sqe->ioprio || sqe->buf_index || sqe->off)
return -EINVAL;
+ if (unlikely(req->ctx->flags & IORING_SETUP_IOPOLL))
+ return -EINVAL;
req->madvise.addr = READ_ONCE(sqe->addr);
req->madvise.len = READ_ONCE(sqe->len);
@@ -3340,6 +3356,8 @@ static int io_fadvise_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe)
{
if (sqe->ioprio || sqe->buf_index || sqe->addr)
return -EINVAL;
+ if (unlikely(req->ctx->flags & IORING_SETUP_IOPOLL))
+ return -EINVAL;
req->fadvise.offset = READ_ONCE(sqe->off);
req->fadvise.len = READ_ONCE(sqe->len);
@@ -3373,6 +3391,8 @@ static int io_fadvise(struct io_kiocb *req, bool force_nonblock)
static int io_statx_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe)
{
+ if (unlikely(req->ctx->flags & IORING_SETUP_IOPOLL))
+ return -EINVAL;
if (sqe->ioprio || sqe->buf_index)
return -EINVAL;
if (req->flags & REQ_F_FIXED_FILE)
@@ -3417,6 +3437,8 @@ static int io_close_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe)
*/
req->work.flags |= IO_WQ_WORK_NO_CANCEL;
+ if (unlikely(req->ctx->flags & (IORING_SETUP_IOPOLL|IORING_SETUP_SQPOLL)))
+ return -EINVAL;
if (sqe->ioprio || sqe->off || sqe->addr || sqe->len ||
sqe->rw_flags || sqe->buf_index)
return -EINVAL;
@@ -4906,6 +4928,8 @@ static int io_files_update_prep(struct io_kiocb *req,
{
if (sqe->flags || sqe->ioprio || sqe->rw_flags)
return -EINVAL;
+ if (unlikely(req->ctx->flags & IORING_SETUP_IOPOLL))
+ return -EINVAL;
req->files_update.offset = READ_ONCE(sqe->off);
req->files_update.nr_args = READ_ONCE(sqe->len);
--
2.24.0
next prev parent reply other threads:[~2020-06-03 15:04 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-03 15:03 [PATCH v3 0/4] forbid fix {SQ,IO}POLL Pavel Begunkov
2020-06-03 15:03 ` Pavel Begunkov [this message]
2020-06-03 15:03 ` [PATCH v3 2/4] io_uring: do build_open_how() only once Pavel Begunkov
2020-06-03 15:03 ` [PATCH v3 3/4] io_uring: deduplicate io_openat{,2}_prep() Pavel Begunkov
2020-06-03 15:03 ` [PATCH v3 4/4] io_uring: move send/recv IOPOLL check into prep Pavel Begunkov
2020-06-03 15:14 ` [PATCH v3 0/4] forbid fix {SQ,IO}POLL Pavel Begunkov
2020-06-03 18:51 ` Jens Axboe
2020-06-04 17:06 ` Jens Axboe
2020-06-04 19:22 ` Pavel Begunkov
2020-06-04 19:52 ` Jens Axboe
2020-06-04 20:12 ` Pavel Begunkov
2020-06-04 20:17 ` Jens Axboe
2020-06-04 20:25 ` Pavel Begunkov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=917e992a6efc417ee1d36afb29623f577634f907.1591196426.git.asml.silence@gmail.com \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox