From: Jens Axboe <[email protected]>
To: Xiaobing Li <[email protected]>
Cc: [email protected], [email protected],
[email protected], [email protected],
[email protected], [email protected],
[email protected], [email protected],
[email protected], [email protected],
[email protected]
Subject: Re: [PATCH v9] io_uring: Statistics of the true utilization of sq threads.
Date: Tue, 27 Feb 2024 07:36:52 -0700 [thread overview]
Message-ID: <[email protected]> (raw)
In-Reply-To: <[email protected]>
On 2/26/24 10:45 PM, Xiaobing Li wrote:
> On 2/21/24 10:28, Jens Axboe wrote:
>> On 2/20/24 7:04 PM, Xiaobing Li wrote:
>>> On 2/19/24 14:42, Xiaobing Li wrote:
>>>> diff --git a/io_uring/fdinfo.c b/io_uring/fdinfo.c
>>>> index 976e9500f651..37afc5bac279 100644
>>>> --- a/io_uring/fdinfo.c
>>>> +++ b/io_uring/fdinfo.c
>>>> @@ -55,6 +55,7 @@ __cold void io_uring_show_fdinfo(struct seq_file *m, struct file *f)
>>>> struct io_ring_ctx *ctx = f->private_data;
>>>> struct io_overflow_cqe *ocqe;
>>>> struct io_rings *r = ctx->rings;
>>>> + struct rusage sq_usage;
>>>> unsigned int sq_mask = ctx->sq_entries - 1, cq_mask = ctx->cq_entries - 1;
>>>> unsigned int sq_head = READ_ONCE(r->sq.head);
>>>> unsigned int sq_tail = READ_ONCE(r->sq.tail);
>>>> @@ -64,6 +65,7 @@ __cold void io_uring_show_fdinfo(struct seq_file *m, struct file *f)
>>>> unsigned int sq_shift = 0;
>>>> unsigned int sq_entries, cq_entries;
>>>> int sq_pid = -1, sq_cpu = -1;
>>>> + u64 sq_total_time = 0, sq_work_time = 0;
>>>> bool has_lock;
>>>> unsigned int i;
>>>>
>>>> @@ -147,10 +149,15 @@ __cold void io_uring_show_fdinfo(struct seq_file *m, struct file *f)
>>>>
>>>> sq_pid = sq->task_pid;
>>>> sq_cpu = sq->sq_cpu;
>>>> + getrusage(sq->thread, RUSAGE_SELF, &sq_usage);
>>>> + sq_total_time = sq_usage.ru_stime.tv_sec * 1000000 + sq_usage.ru_stime.tv_usec;
>>>> + sq_work_time = sq->work_time;
>>>> }
>>>>
>>>> seq_printf(m, "SqThread:\t%d\n", sq_pid);
>>>> seq_printf(m, "SqThreadCpu:\t%d\n", sq_cpu);
>>>> + seq_printf(m, "SqTotalTime:\t%llu\n", sq_total_time);
>>>> + seq_printf(m, "SqWorkTime:\t%llu\n", sq_work_time);
>>>> seq_printf(m, "UserFiles:\t%u\n", ctx->nr_user_files);
>>>> for (i = 0; has_lock && i < ctx->nr_user_files; i++) {
>>>> struct file *f = io_file_from_index(&ctx->file_table, i);
>>>> diff --git a/io_uring/sqpoll.c b/io_uring/sqpoll.c
>>>> index 65b5dbe3c850..006d7fc9cf92 100644
>>>> --- a/io_uring/sqpoll.c
>>>> +++ b/io_uring/sqpoll.c
>>>> @@ -219,10 +219,22 @@ static bool io_sqd_handle_event(struct io_sq_data *sqd)
>>>> return did_sig || test_bit(IO_SQ_THREAD_SHOULD_STOP, &sqd->state);
>>>> }
>>>>
>>>> +static void io_sq_update_worktime(struct io_sq_data *sqd, struct rusage *start)
>>>> +{
>>>> + struct rusage end;
>>>> +
>>>> + getrusage(current, RUSAGE_SELF, &end);
>>>> + end.ru_stime.tv_sec -= start->ru_stime.tv_sec;
>>>> + end.ru_stime.tv_usec -= start->ru_stime.tv_usec;
>>>> +
>>>> + sqd->work_time += end.ru_stime.tv_usec + end.ru_stime.tv_sec * 1000000;
>>>> +}
>>>> +
>>>> static int io_sq_thread(void *data)
>>>> {
>>>> struct io_sq_data *sqd = data;
>>>> struct io_ring_ctx *ctx;
>>>> + struct rusage start;
>>>> unsigned long timeout = 0;
>>>> char buf[TASK_COMM_LEN];
>>>> DEFINE_WAIT(wait);
>>>> @@ -251,6 +263,7 @@ static int io_sq_thread(void *data)
>>>> }
>>>>
>>>> cap_entries = !list_is_singular(&sqd->ctx_list);
>>>> + getrusage(current, RUSAGE_SELF, &start);
>>>> list_for_each_entry(ctx, &sqd->ctx_list, sqd_list) {
>>>> int ret = __io_sq_thread(ctx, cap_entries);
>>>>
>>>> @@ -261,8 +274,10 @@ static int io_sq_thread(void *data)
>>>> sqt_spin = true;
>>>>
>>>> if (sqt_spin || !time_after(jiffies, timeout)) {
>>>> - if (sqt_spin)
>>>> + if (sqt_spin) {
>>>> + io_sq_update_worktime(sqd, &start);
>>>> timeout = jiffies + sqd->sq_thread_idle;
>>>> + }
>>>> if (unlikely(need_resched())) {
>>>> mutex_unlock(&sqd->lock);
>>>> cond_resched();
>>>> diff --git a/io_uring/sqpoll.h b/io_uring/sqpoll.h
>>>> index 8df37e8c9149..4171666b1cf4 100644
>>>> --- a/io_uring/sqpoll.h
>>>> +++ b/io_uring/sqpoll.h
>>>> @@ -16,6 +16,7 @@ struct io_sq_data {
>>>> pid_t task_pid;
>>>> pid_t task_tgid;
>>>>
>>>> + u64 work_time;
>>>> unsigned long state;
>>>> struct completion exited;
>>>> };
>>>
>>> Hi, Jens
>>> I have modified the code according to your suggestions.
>>> Do you have any other comments?
>>
>> Out of town this week, I'll check next week. But from a quick look,
>> looks much better now.
>
> Hi, Jens
> Do you have time to check now?
Can I ask you to resend it against for-6.9/io_uring? For some reason I
don't see the original patch on the list.
--
Jens Axboe
next prev parent reply other threads:[~2024-02-27 14:36 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20240219064250epcas5p10e883fb39a12909946028672c0b5d6f3@epcas5p1.samsung.com>
2024-02-19 6:42 ` [PATCH v9] io_uring: Statistics of the true utilization of sq threads Xiaobing Li
[not found] ` <CGME20240221020432epcas5p4d3f6dcf44a4c2be392e94889786c75bc@epcas5p4.samsung.com>
2024-02-21 2:04 ` Xiaobing Li
2024-02-21 17:28 ` Jens Axboe
[not found] ` <CGME20240227054554epcas5p3ada1c39620d0156e6db87f05449dd624@epcas5p3.samsung.com>
2024-02-27 5:45 ` Xiaobing Li
2024-02-27 14:36 ` Jens Axboe [this message]
[not found] ` <CGME20240228063029epcas5p47871105810840bfa7dc9da8d710ba2ec@epcas5p4.samsung.com>
2024-02-28 6:30 ` Xiaobing Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox