public inbox for [email protected]
 help / color / mirror / Atom feed
From: Sedat Dilek <[email protected]>
To: Jens Axboe <[email protected]>
Cc: [email protected], [email protected],
	[email protected], [email protected],
	[email protected]
Subject: Re: [PATCHSET v5 0/12] Add support for async buffered reads
Date: Thu, 28 May 2020 20:20:50 +0200	[thread overview]
Message-ID: <CA+icZUUnXYO9qX3PJTs=jJXT_1F_d8x5oUfuxkR_mViyfkFDOQ@mail.gmail.com> (raw)
In-Reply-To: <[email protected]>

On Thu, May 28, 2020 at 7:14 PM Jens Axboe <[email protected]> wrote:
>
> On 5/28/20 11:12 AM, Sedat Dilek wrote:
> > On Thu, May 28, 2020 at 7:06 PM Jens Axboe <[email protected]> wrote:
> >>
> >> On 5/28/20 11:02 AM, Sedat Dilek wrote:
> >>> On Tue, May 26, 2020 at 10:59 PM Jens Axboe <[email protected]> wrote:
> >>>>
> >>>> We technically support this already through io_uring, but it's
> >>>> implemented with a thread backend to support cases where we would
> >>>> block. This isn't ideal.
> >>>>
> >>>> After a few prep patches, the core of this patchset is adding support
> >>>> for async callbacks on page unlock. With this primitive, we can simply
> >>>> retry the IO operation. With io_uring, this works a lot like poll based
> >>>> retry for files that support it. If a page is currently locked and
> >>>> needed, -EIOCBQUEUED is returned with a callback armed. The callers
> >>>> callback is responsible for restarting the operation.
> >>>>
> >>>> With this callback primitive, we can add support for
> >>>> generic_file_buffered_read(), which is what most file systems end up
> >>>> using for buffered reads. XFS/ext4/btrfs/bdev is wired up, but probably
> >>>> trivial to add more.
> >>>>
> >>>> The file flags support for this by setting FMODE_BUF_RASYNC, similar
> >>>> to what we do for FMODE_NOWAIT. Open to suggestions here if this is
> >>>> the preferred method or not.
> >>>>
> >>>> In terms of results, I wrote a small test app that randomly reads 4G
> >>>> of data in 4K chunks from a file hosted by ext4. The app uses a queue
> >>>> depth of 32. If you want to test yourself, you can just use buffered=1
> >>>> with ioengine=io_uring with fio. No application changes are needed to
> >>>> use the more optimized buffered async read.
> >>>>
> >>>> preadv for comparison:
> >>>>         real    1m13.821s
> >>>>         user    0m0.558s
> >>>>         sys     0m11.125s
> >>>>         CPU     ~13%
> >>>>
> >>>> Mainline:
> >>>>         real    0m12.054s
> >>>>         user    0m0.111s
> >>>>         sys     0m5.659s
> >>>>         CPU     ~32% + ~50% == ~82%
> >>>>
> >>>> This patchset:
> >>>>         real    0m9.283s
> >>>>         user    0m0.147s
> >>>>         sys     0m4.619s
> >>>>         CPU     ~52%
> >>>>
> >>>> The CPU numbers are just a rough estimate. For the mainline io_uring
> >>>> run, this includes the app itself and all the threads doing IO on its
> >>>> behalf (32% for the app, ~1.6% per worker and 32 of them). Context
> >>>> switch rate is much smaller with the patchset, since we only have the
> >>>> one task performing IO.
> >>>>
> >>>> Also ran a simple fio based test case, varying the queue depth from 1
> >>>> to 16, doubling every time:
> >>>>
> >>>> [buf-test]
> >>>> filename=/data/file
> >>>> direct=0
> >>>> ioengine=io_uring
> >>>> norandommap
> >>>> rw=randread
> >>>> bs=4k
> >>>> iodepth=${QD}
> >>>> randseed=89
> >>>> runtime=10s
> >>>>
> >>>> QD/Test         Patchset IOPS           Mainline IOPS
> >>>> 1               9046                    8294
> >>>> 2               19.8k                   18.9k
> >>>> 4               39.2k                   28.5k
> >>>> 8               64.4k                   31.4k
> >>>> 16              65.7k                   37.8k
> >>>>
> >>>> Outside of my usual environment, so this is just running on a virtualized
> >>>> NVMe device in qemu, using ext4 as the file system. NVMe isn't very
> >>>> efficient virtualized, so we run out of steam at ~65K which is why we
> >>>> flatline on the patched side (nvme_submit_cmd() eats ~75% of the test app
> >>>> CPU). Before that happens, it's a linear increase. Not shown is context
> >>>> switch rate, which is massively lower with the new code. The old thread
> >>>> offload adds a blocking thread per pending IO, so context rate quickly
> >>>> goes through the roof.
> >>>>
> >>>> The goal here is efficiency. Async thread offload adds latency, and
> >>>> it also adds noticable overhead on items such as adding pages to the
> >>>> page cache. By allowing proper async buffered read support, we don't
> >>>> have X threads hammering on the same inode page cache, we have just
> >>>> the single app actually doing IO.
> >>>>
> >>>> Been beating on this and it's solid for me, and I'm now pretty happy
> >>>> with how it all turned out. Not aware of any missing bits/pieces or
> >>>> code cleanups that need doing.
> >>>>
> >>>> Series can also be found here:
> >>>>
> >>>> https://git.kernel.dk/cgit/linux-block/log/?h=async-buffered.5
> >>>>
> >>>> or pull from:
> >>>>
> >>>> git://git.kernel.dk/linux-block async-buffered.5
> >>>>
> >>>
> >>> Hi Jens,
> >>>
> >>> I have pulled linux-block.git#async-buffered.5 on top of Linux v5.7-rc7.
> >>>
> >>> From first feelings:
> >>> The booting into the system (until sddm display-login-manager) took a
> >>> bit longer.
> >>> The same after login and booting into KDE/Plasma.
> >>
> >> There is no difference for "regular" use cases, only io_uring with
> >> buffered reads will behave differently. So I don't think you have longer
> >> boot times due to this.
> >>
> >>> I am building/linking with LLVM/Clang/LLD v10.0.1-rc1 on Debian/testing AMD64.
> >>>
> >>> Here I have an internal HDD (SATA) and my Debian-system is on an
> >>> external HDD connected via USB-3.0.
> >>> Primarily, I use Ext4-FS.
> >>>
> >>> As said above is the "emotional" side, but I need some technical instructions.
> >>>
> >>> How can I see Async Buffer Reads is active on a Ext4-FS-formatted partition?
> >>
> >> You can't see that. It'll always be available on ext4 with this series,
> >> and you can watch io_uring instances to see if anyone is using it.
> >>
> >
> > Thanks for answering my questions.
> >
> > How can I "watch io_uring instances"?
>
> You can enable io_uring tracing:
>
> # echo 1 > /sys/kernel/debug/tracing/events/io_uring/io_uring_create/enable
> # tail /sys/kernel/debug/tracing/trace
>
> and see if you get any events for setup. Generally you can also look for
> the existence of io_wq_manager processes, these will exist for an
> io_uring instance.
>
> > FIO?
> > Debian has fio version 3.19-2 in its apt repositories.
> > Version OK?
>
> Yeah that should work.
>

I did:

# echo 1 > /sys/kernel/debug/tracing/events/io_uring/io_uring_create/enable
# cat /sys/kernel/debug/tracing/events/io_uring/io_uring_create/enable
1

# cat ./buf-test-dileks-min
[buf-test-dileks-min]
filename=/path/to/iso-image-file
buffered=1
ioengine=io_uring

# fio --showcmd ./buf-test-dileks-min
fio --name=buf-test-dileks-min --buffered=1 --ioengine=io_uring
--filename=filename=/path/to/iso-image-file

# fio ./buf-test-dileks-min

# ps -ef | egrep 'f[i]o|i[o]_wq'
root        6695    6066 24 20:13 pts/2    00:00:00 fio ./buf-test-dileks-min
root        6701    6695 22 20:13 ?        00:00:00 fio ./buf-test-dileks-min
root        6702       2  0 20:13 ?        00:00:00 [io_wq_manager]
root        6703       2  0 20:13 ?        00:00:00 [io_wqe_worker-0]

# LC_ALL=C tail -f /sys/kernel/debug/tracing/trace
...
# entries-in-buffer/entries-written: 16/16   #P:4
#
#                              _-----=> irqs-off
#                             / _----=> need-resched
#                            | / _---=> hardirq/softirq
#                            || / _--=> preempt-depth
#                            ||| /     delay
#           TASK-PID   CPU#  ||||    TIMESTAMP  FUNCTION
#              | |       |   ||||       |         |
...
             fio-6701  [001] ....  6775.117015: io_uring_create: ring
00000000ef052188, fd 5 sq size 1, cq size 2, flags 0

Looks like this works.

Thanks Jens.

- Sedat -

  reply	other threads:[~2020-05-28 18:20 UTC|newest]

Thread overview: 63+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-26 19:51 [PATCHSET v5 0/12] Add support for async buffered reads Jens Axboe
2020-05-26 19:51 ` [PATCH 01/12] block: read-ahead submission should imply no-wait as well Jens Axboe
2020-05-26 19:51 ` [PATCH 02/12] mm: allow read-ahead with IOCB_NOWAIT set Jens Axboe
2020-05-26 20:45   ` Johannes Weiner
2020-05-26 19:51 ` [PATCH 03/12] mm: abstract out wake_page_match() from wake_page_function() Jens Axboe
2020-05-26 21:02   ` Johannes Weiner
2020-06-01 14:16   ` Matthew Wilcox
2020-05-26 19:51 ` [PATCH 04/12] mm: add support for async page locking Jens Axboe
2020-05-26 21:59   ` Johannes Weiner
2020-05-26 22:01     ` Jens Axboe
2020-05-27 16:02       ` Johannes Weiner
2020-06-01 14:26   ` Matthew Wilcox
2020-06-01 17:15     ` Jens Axboe
2020-05-26 19:51 ` [PATCH 05/12] mm: support async buffered reads in generic_file_buffered_read() Jens Axboe
2020-05-26 22:00   ` Johannes Weiner
2020-05-26 19:51 ` [PATCH 06/12] fs: add FMODE_BUF_RASYNC Jens Axboe
2020-05-26 19:51 ` [PATCH 07/12] ext4: flag as supporting buffered async reads Jens Axboe
2020-05-26 19:51 ` [PATCH 08/12] block: flag block devices as supporting IOCB_WAITQ Jens Axboe
2020-05-26 19:51 ` [PATCH 09/12] xfs: flag files as supporting buffered async reads Jens Axboe
2020-05-28 17:53   ` Darrick J. Wong
2020-05-28 19:23     ` Jens Axboe
2020-05-26 19:51 ` [PATCH 10/12] btrfs: " Jens Axboe
2020-05-26 19:57   ` Chris Mason
2020-05-26 19:51 ` [PATCH 11/12] mm: add kiocb_wait_page_queue_init() helper Jens Axboe
2020-05-26 22:01   ` Johannes Weiner
2020-05-26 19:51 ` [PATCH 12/12] io_uring: support true async buffered reads, if file provides it Jens Axboe
     [not found] ` <CA+icZUWfX+QmroE6j74C7o-BdfMF5=6PdYrA=5W_JCKddqkJgQ@mail.gmail.com>
2020-05-28 17:06   ` [PATCHSET v5 0/12] Add support for async buffered reads Jens Axboe
2020-05-28 17:12     ` Sedat Dilek
2020-05-28 17:14       ` Jens Axboe
2020-05-28 18:20         ` Sedat Dilek [this message]
2020-05-29 10:02     ` Sedat Dilek
2020-05-29 11:22       ` Sedat Dilek
2020-05-30 13:36         ` Sedat Dilek
2020-05-30 18:57           ` Sedat Dilek
2020-05-31  1:57             ` Jens Axboe
     [not found]               ` <CA+icZUXxmOA-5+dukCgxfSp4eVHB+QaAHO6tsgq0iioQs3Af-w@mail.gmail.com>
2020-05-31  7:12                 ` Sedat Dilek
2020-06-01 13:35                   ` Sedat Dilek
2020-06-01 14:04                     ` Jens Axboe
2020-06-01 14:13                       ` Sedat Dilek
2020-06-01 14:14                         ` Jens Axboe
2020-06-01 14:35                           ` Jens Axboe
2020-06-01 14:43                             ` Sedat Dilek
2020-06-01 14:46                               ` Jens Axboe
2020-06-01 14:51                                 ` Sedat Dilek
2020-06-01 20:18                                 ` Sedat Dilek
     [not found] ` <[email protected]>
2020-06-04  1:04   ` Jens Axboe
2020-06-04  1:30     ` Andres Freund
2020-06-05 19:56       ` Andres Freund
2020-06-05 14:42     ` Jens Axboe
2020-06-05 20:20       ` Andres Freund
2020-06-05 20:21         ` Jens Axboe
2020-06-05 20:36         ` Andres Freund
2020-06-05 20:53           ` Jens Axboe
2020-06-05 21:13             ` Jens Axboe
2020-06-05 21:21               ` Jens Axboe
2020-06-05 22:30                 ` Andres Freund
2020-06-05 22:36                   ` Andres Freund
2020-06-05 22:49                     ` Jens Axboe
2020-06-05 22:54                       ` Andres Freund
2020-06-05 22:56                         ` Jens Axboe
2020-06-05 23:02                           ` Andres Freund
2020-06-06  0:33                 ` Sedat Dilek
2020-06-06 16:04                   ` Jens Axboe

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CA+icZUUnXYO9qX3PJTs=jJXT_1F_d8x5oUfuxkR_mViyfkFDOQ@mail.gmail.com' \
    [email protected] \
    [email protected] \
    [email protected] \
    [email protected] \
    [email protected] \
    [email protected] \
    [email protected] \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox