public inbox for [email protected]
 help / color / mirror / Atom feed
* [PATCH V4 00/17] io_uring/ublk: add IORING_OP_FUSED_CMD
@ 2023-03-24 13:57 ` Ming Lei
  2023-03-24 13:57   ` [PATCH V4 01/17] io_uring: increase io_kiocb->flags into 64bit Ming Lei
                     ` (18 more replies)
  0 siblings, 19 replies; 28+ messages in thread
From: Ming Lei @ 2023-03-24 13:57 UTC (permalink / raw)
  To: Jens Axboe, io-uring, linux-block
  Cc: linux-kernel, Miklos Szeredi, ZiyangZhang, Xiaoguang Wang,
	Bernd Schubert, Pavel Begunkov, Stefan Hajnoczi, Ming Lei

Hello Jens,

Add IORING_OP_FUSED_CMD, it is one special URING_CMD, which has to
be SQE128. The 1st SQE(master) is one 64byte URING_CMD, and the 2nd
64byte SQE(slave) is another normal 64byte OP. For any OP which needs
to support slave OP, io_issue_defs[op].fused_slave needs to be set as 1,
and its ->issue() can retrieve/import buffer from master request's
fused_cmd_kbuf. The slave OP is actually submitted from kernel, part of
this idea is from Xiaoguang's ublk ebpf patchset, but this patchset
submits slave OP just like normal OP issued from userspace, that said,
SQE order is kept, and batching handling is done too.

Please see detailed design in commit log of the 2th patch, and one big
point is how to handle buffer ownership.

With this way, it is easy to support zero copy for ublk/fuse device.

Basically userspace can specify any sub-buffer of the ublk block request
buffer from the fused command just by setting 'offset/len'
in the slave SQE for running slave OP. This way is flexible to implement
io mapping: mirror, stripped, ...

The 4th & 5th patches enable fused slave support for the following OPs:

	OP_READ/OP_WRITE
	OP_SEND/OP_RECV/OP_SEND_ZC

The other ublk patches cleans ublk driver and implement fused command
for supporting zero copy.

Follows userspace code, which supports 128byte SQE fused command only:

https://github.com/ming1/ubdsrv/tree/fused-cmd-zc-v2

All three(loop, nbd and qcow2) ublk targets have supported zero copy by passing:

	ublk add -t [loop|nbd|qcow2] -z .... 

Basic fs mount/kernel building and builtin test are done, and also not
observe regression on xfstest test over ublk-loop with zero copy.

Also add liburing test case for covering fused command based on miniublk
of blktest(supports 64byte normal SQE only)

https://github.com/ming1/liburing/commits/fused_cmd_miniublk

Performance improvement is obvious on memory bandwidth related workloads,
such as, 1~2X improvement on 64K/512K BS IO test on loop with ramfs backing file.
ublk-null shows 5X IOPS improvement on big BS test when the copy is avoided.

Please review and consider for v6.4.

V4:
	- improve APIs naming(patch 1 ~ 4)
	- improve documents and commit log(patch 2)
	- add buffer direction bit to opdef, suggested by Jens(patch 2)
	- add ublk zero copy document for cover: technical requirements(most related with
	buffer lifetime), and explains why splice isn't good and how fused command solves it(patch 17)
	- fix sparse warning(patch 7)
	- supports 64byte SQE fused command(patch 3)

V3:
	- fix build warning reported by kernel test robot
	- drop patch for checking fused flags on existed drivers with
	  ->uring_command(), which isn't necessary, since we do not do that
      when adding new ioctl or uring command
    - inline io_init_rq() for core code, so just export io_init_slave_req
	- return result of failed slave request unconditionally since REQ_F_CQE_SKIP
	will be cleared
	- pass xfstest over ublk-loop

V2:
	- don't resue io_mapped_ubuf (io_uring)
	- remove REQ_F_FUSED_MASTER_BIT (io_uring)
	- fix compile warning (io_uring)
	- rebase on v6.3-rc1 (io_uring)
	- grabbing io request reference when handling fused command 
	- simplify ublk_copy_user_pages() by iov iterator
	- add read()/write() for userspace to read/write ublk io buffer, so
	that some corner cases(read zero, passthrough request(report zones)) can
	be handled easily in case of zero copy; this way also helps to switch to
	zero copy completely
	- misc cleanup


Ming Lei (17):
  io_uring: increase io_kiocb->flags into 64bit
  io_uring: add IORING_OP_FUSED_CMD
  io_uring: support normal SQE for fused command
  io_uring: support OP_READ/OP_WRITE for fused slave request
  io_uring: support OP_SEND_ZC/OP_RECV for fused slave request
  block: ublk_drv: mark device as LIVE before adding disk
  block: ublk_drv: add common exit handling
  block: ublk_drv: don't consider flush request in map/unmap io
  block: ublk_drv: add two helpers to clean up map/unmap request
  block: ublk_drv: clean up several helpers
  block: ublk_drv: cleanup 'struct ublk_map_data'
  block: ublk_drv: cleanup ublk_copy_user_pages
  block: ublk_drv: grab request reference when the request is handled by
    userspace
  block: ublk_drv: support to copy any part of request pages
  block: ublk_drv: add read()/write() support for ublk char device
  block: ublk_drv: don't check buffer in case of zero copy
  block: ublk_drv: apply io_uring FUSED_CMD for supporting zero copy

 Documentation/block/ublk.rst   | 126 ++++++-
 drivers/block/ublk_drv.c       | 605 ++++++++++++++++++++++++++-------
 include/linux/io_uring.h       |  49 ++-
 include/linux/io_uring_types.h |  80 +++--
 include/uapi/linux/io_uring.h  |   9 +-
 include/uapi/linux/ublk_cmd.h  |  37 +-
 io_uring/Makefile              |   2 +-
 io_uring/fused_cmd.c           | 259 ++++++++++++++
 io_uring/fused_cmd.h           |  11 +
 io_uring/io_uring.c            |  50 ++-
 io_uring/io_uring.h            |   4 +
 io_uring/net.c                 |  30 +-
 io_uring/opdef.c               |  22 ++
 io_uring/opdef.h               |   7 +
 io_uring/rw.c                  |  20 ++
 15 files changed, 1132 insertions(+), 179 deletions(-)
 create mode 100644 io_uring/fused_cmd.c
 create mode 100644 io_uring/fused_cmd.h

-- 
2.39.2


^ permalink raw reply	[flat|nested] 28+ messages in thread

* [PATCH V4 01/17] io_uring: increase io_kiocb->flags into 64bit
  2023-03-24 13:57 ` [PATCH V4 00/17] io_uring/ublk: add IORING_OP_FUSED_CMD Ming Lei
@ 2023-03-24 13:57   ` Ming Lei
  2023-03-24 13:57   ` [PATCH V4 02/17] io_uring: add IORING_OP_FUSED_CMD Ming Lei
                     ` (17 subsequent siblings)
  18 siblings, 0 replies; 28+ messages in thread
From: Ming Lei @ 2023-03-24 13:57 UTC (permalink / raw)
  To: Jens Axboe, io-uring, linux-block
  Cc: linux-kernel, Miklos Szeredi, ZiyangZhang, Xiaoguang Wang,
	Bernd Schubert, Pavel Begunkov, Stefan Hajnoczi, Ming Lei

The 32bit io_kiocb->flags has been used up, so extend it to 64bit.

Signed-off-by: Ming Lei <[email protected]>
---
 include/linux/io_uring_types.h | 65 +++++++++++++++++-----------------
 io_uring/io_uring.c            |  2 +-
 2 files changed, 34 insertions(+), 33 deletions(-)

diff --git a/include/linux/io_uring_types.h b/include/linux/io_uring_types.h
index 3d152bdcd30a..aab657cd2b77 100644
--- a/include/linux/io_uring_types.h
+++ b/include/linux/io_uring_types.h
@@ -409,68 +409,68 @@ enum {
 
 enum {
 	/* ctx owns file */
-	REQ_F_FIXED_FILE	= BIT(REQ_F_FIXED_FILE_BIT),
+	REQ_F_FIXED_FILE	= BIT_ULL(REQ_F_FIXED_FILE_BIT),
 	/* drain existing IO first */
-	REQ_F_IO_DRAIN		= BIT(REQ_F_IO_DRAIN_BIT),
+	REQ_F_IO_DRAIN		= BIT_ULL(REQ_F_IO_DRAIN_BIT),
 	/* linked sqes */
-	REQ_F_LINK		= BIT(REQ_F_LINK_BIT),
+	REQ_F_LINK		= BIT_ULL(REQ_F_LINK_BIT),
 	/* doesn't sever on completion < 0 */
-	REQ_F_HARDLINK		= BIT(REQ_F_HARDLINK_BIT),
+	REQ_F_HARDLINK		= BIT_ULL(REQ_F_HARDLINK_BIT),
 	/* IOSQE_ASYNC */
-	REQ_F_FORCE_ASYNC	= BIT(REQ_F_FORCE_ASYNC_BIT),
+	REQ_F_FORCE_ASYNC	= BIT_ULL(REQ_F_FORCE_ASYNC_BIT),
 	/* IOSQE_BUFFER_SELECT */
-	REQ_F_BUFFER_SELECT	= BIT(REQ_F_BUFFER_SELECT_BIT),
+	REQ_F_BUFFER_SELECT	= BIT_ULL(REQ_F_BUFFER_SELECT_BIT),
 	/* IOSQE_CQE_SKIP_SUCCESS */
-	REQ_F_CQE_SKIP		= BIT(REQ_F_CQE_SKIP_BIT),
+	REQ_F_CQE_SKIP		= BIT_ULL(REQ_F_CQE_SKIP_BIT),
 
 	/* fail rest of links */
-	REQ_F_FAIL		= BIT(REQ_F_FAIL_BIT),
+	REQ_F_FAIL		= BIT_ULL(REQ_F_FAIL_BIT),
 	/* on inflight list, should be cancelled and waited on exit reliably */
-	REQ_F_INFLIGHT		= BIT(REQ_F_INFLIGHT_BIT),
+	REQ_F_INFLIGHT		= BIT_ULL(REQ_F_INFLIGHT_BIT),
 	/* read/write uses file position */
-	REQ_F_CUR_POS		= BIT(REQ_F_CUR_POS_BIT),
+	REQ_F_CUR_POS		= BIT_ULL(REQ_F_CUR_POS_BIT),
 	/* must not punt to workers */
-	REQ_F_NOWAIT		= BIT(REQ_F_NOWAIT_BIT),
+	REQ_F_NOWAIT		= BIT_ULL(REQ_F_NOWAIT_BIT),
 	/* has or had linked timeout */
-	REQ_F_LINK_TIMEOUT	= BIT(REQ_F_LINK_TIMEOUT_BIT),
+	REQ_F_LINK_TIMEOUT	= BIT_ULL(REQ_F_LINK_TIMEOUT_BIT),
 	/* needs cleanup */
-	REQ_F_NEED_CLEANUP	= BIT(REQ_F_NEED_CLEANUP_BIT),
+	REQ_F_NEED_CLEANUP	= BIT_ULL(REQ_F_NEED_CLEANUP_BIT),
 	/* already went through poll handler */
-	REQ_F_POLLED		= BIT(REQ_F_POLLED_BIT),
+	REQ_F_POLLED		= BIT_ULL(REQ_F_POLLED_BIT),
 	/* buffer already selected */
-	REQ_F_BUFFER_SELECTED	= BIT(REQ_F_BUFFER_SELECTED_BIT),
+	REQ_F_BUFFER_SELECTED	= BIT_ULL(REQ_F_BUFFER_SELECTED_BIT),
 	/* buffer selected from ring, needs commit */
-	REQ_F_BUFFER_RING	= BIT(REQ_F_BUFFER_RING_BIT),
+	REQ_F_BUFFER_RING	= BIT_ULL(REQ_F_BUFFER_RING_BIT),
 	/* caller should reissue async */
-	REQ_F_REISSUE		= BIT(REQ_F_REISSUE_BIT),
+	REQ_F_REISSUE		= BIT_ULL(REQ_F_REISSUE_BIT),
 	/* supports async reads/writes */
-	REQ_F_SUPPORT_NOWAIT	= BIT(REQ_F_SUPPORT_NOWAIT_BIT),
+	REQ_F_SUPPORT_NOWAIT	= BIT_ULL(REQ_F_SUPPORT_NOWAIT_BIT),
 	/* regular file */
-	REQ_F_ISREG		= BIT(REQ_F_ISREG_BIT),
+	REQ_F_ISREG		= BIT_ULL(REQ_F_ISREG_BIT),
 	/* has creds assigned */
-	REQ_F_CREDS		= BIT(REQ_F_CREDS_BIT),
+	REQ_F_CREDS		= BIT_ULL(REQ_F_CREDS_BIT),
 	/* skip refcounting if not set */
-	REQ_F_REFCOUNT		= BIT(REQ_F_REFCOUNT_BIT),
+	REQ_F_REFCOUNT		= BIT_ULL(REQ_F_REFCOUNT_BIT),
 	/* there is a linked timeout that has to be armed */
-	REQ_F_ARM_LTIMEOUT	= BIT(REQ_F_ARM_LTIMEOUT_BIT),
+	REQ_F_ARM_LTIMEOUT	= BIT_ULL(REQ_F_ARM_LTIMEOUT_BIT),
 	/* ->async_data allocated */
-	REQ_F_ASYNC_DATA	= BIT(REQ_F_ASYNC_DATA_BIT),
+	REQ_F_ASYNC_DATA	= BIT_ULL(REQ_F_ASYNC_DATA_BIT),
 	/* don't post CQEs while failing linked requests */
-	REQ_F_SKIP_LINK_CQES	= BIT(REQ_F_SKIP_LINK_CQES_BIT),
+	REQ_F_SKIP_LINK_CQES	= BIT_ULL(REQ_F_SKIP_LINK_CQES_BIT),
 	/* single poll may be active */
-	REQ_F_SINGLE_POLL	= BIT(REQ_F_SINGLE_POLL_BIT),
+	REQ_F_SINGLE_POLL	= BIT_ULL(REQ_F_SINGLE_POLL_BIT),
 	/* double poll may active */
-	REQ_F_DOUBLE_POLL	= BIT(REQ_F_DOUBLE_POLL_BIT),
+	REQ_F_DOUBLE_POLL	= BIT_ULL(REQ_F_DOUBLE_POLL_BIT),
 	/* request has already done partial IO */
-	REQ_F_PARTIAL_IO	= BIT(REQ_F_PARTIAL_IO_BIT),
+	REQ_F_PARTIAL_IO	= BIT_ULL(REQ_F_PARTIAL_IO_BIT),
 	/* fast poll multishot mode */
-	REQ_F_APOLL_MULTISHOT	= BIT(REQ_F_APOLL_MULTISHOT_BIT),
+	REQ_F_APOLL_MULTISHOT	= BIT_ULL(REQ_F_APOLL_MULTISHOT_BIT),
 	/* ->extra1 and ->extra2 are initialised */
-	REQ_F_CQE32_INIT	= BIT(REQ_F_CQE32_INIT_BIT),
+	REQ_F_CQE32_INIT	= BIT_ULL(REQ_F_CQE32_INIT_BIT),
 	/* recvmsg special flag, clear EPOLLIN */
-	REQ_F_CLEAR_POLLIN	= BIT(REQ_F_CLEAR_POLLIN_BIT),
+	REQ_F_CLEAR_POLLIN	= BIT_ULL(REQ_F_CLEAR_POLLIN_BIT),
 	/* hashed into ->cancel_hash_locked, protected by ->uring_lock */
-	REQ_F_HASH_LOCKED	= BIT(REQ_F_HASH_LOCKED_BIT),
+	REQ_F_HASH_LOCKED	= BIT_ULL(REQ_F_HASH_LOCKED_BIT),
 };
 
 typedef void (*io_req_tw_func_t)(struct io_kiocb *req, bool *locked);
@@ -531,7 +531,8 @@ struct io_kiocb {
 	 * and after selection it points to the buffer ID itself.
 	 */
 	u16				buf_index;
-	unsigned int			flags;
+	u32				__pad;
+	u64				flags;
 
 	struct io_cqe			cqe;
 
diff --git a/io_uring/io_uring.c b/io_uring/io_uring.c
index 24be4992821b..449508912a9c 100644
--- a/io_uring/io_uring.c
+++ b/io_uring/io_uring.c
@@ -4486,7 +4486,7 @@ static int __init io_uring_init(void)
 	BUILD_BUG_ON(SQE_COMMON_FLAGS >= (1 << 8));
 	BUILD_BUG_ON((SQE_VALID_FLAGS | SQE_COMMON_FLAGS) != SQE_VALID_FLAGS);
 
-	BUILD_BUG_ON(__REQ_F_LAST_BIT > 8 * sizeof(int));
+	BUILD_BUG_ON(__REQ_F_LAST_BIT > 8 * sizeof(u64));
 
 	BUILD_BUG_ON(sizeof(atomic_t) != sizeof(u32));
 
-- 
2.39.2


^ permalink raw reply related	[flat|nested] 28+ messages in thread

* [PATCH V4 02/17] io_uring: add IORING_OP_FUSED_CMD
  2023-03-24 13:57 ` [PATCH V4 00/17] io_uring/ublk: add IORING_OP_FUSED_CMD Ming Lei
  2023-03-24 13:57   ` [PATCH V4 01/17] io_uring: increase io_kiocb->flags into 64bit Ming Lei
@ 2023-03-24 13:57   ` Ming Lei
  2023-03-24 13:57   ` [PATCH V4 03/17] io_uring: support normal SQE for fused command Ming Lei
                     ` (16 subsequent siblings)
  18 siblings, 0 replies; 28+ messages in thread
From: Ming Lei @ 2023-03-24 13:57 UTC (permalink / raw)
  To: Jens Axboe, io-uring, linux-block
  Cc: linux-kernel, Miklos Szeredi, ZiyangZhang, Xiaoguang Wang,
	Bernd Schubert, Pavel Begunkov, Stefan Hajnoczi, Ming Lei

Add IORING_OP_FUSED_CMD, it is one special URING_CMD, which has to
be SQE128. The 1st SQE(master) is one 64byte URING_CMD, and the 2nd
64byte SQE(slave) is another normal 64byte OP. For any OP which needs
to support slave OP, io_issue_defs[op].fused_slave has to be set as 1,
and its ->issue() needs to retrieve buffer from master request's
fused_cmd_kbuf.

Follows the key points of the design/implementation:

1) The master uring command produces and provides immutable command
buffer(struct io_uring_bvec_buf) to the slave request, and the slave
OP can retrieve any part of this buffer by sqe->addr and sqe->len.

2) Master command is always completed after the slave request is
completed, so slave request can be thought as serving for master
command.

- slave request borrows master command's buffer(io_uring_bvec_buf), after
slave request is completed, the buffer is returned back to master request.

- This way also guarantees correct SQE order since the master
request uses slave request's LINK flag.

3) Master request completion is always notified to driver, so that driver
can know when the buffer is done with slave quest. This way is important
since io_uring_bvec_buf represents reference of device io command buffer,
and we have to gurantee that reference can not outlive the referent buffer,
so far which is represented by bvec.

4) kernel API of io_fused_cmd_start_slave_req is called by driver for
making the buffer of io_uring_bvec_buf and starting to submit slave
request with the provided buffer.

The motivation is for supporting zero copy for fuse/ublk, in which
the device holds IO request buffer, and IO handling is often normal
IO OP(fs, net, ..). With IORING_OP_FUSED_CMD, we can implement this kind
of zero copy easily & reliably.

Signed-off-by: Ming Lei <[email protected]>
---
 include/linux/io_uring.h       |  49 ++++++-
 include/linux/io_uring_types.h |  15 +++
 include/uapi/linux/io_uring.h  |   1 +
 io_uring/Makefile              |   2 +-
 io_uring/fused_cmd.c           | 233 +++++++++++++++++++++++++++++++++
 io_uring/fused_cmd.h           |  11 ++
 io_uring/io_uring.c            |  26 +++-
 io_uring/io_uring.h            |   3 +
 io_uring/opdef.c               |  12 ++
 io_uring/opdef.h               |   7 +
 10 files changed, 353 insertions(+), 6 deletions(-)
 create mode 100644 io_uring/fused_cmd.c
 create mode 100644 io_uring/fused_cmd.h

diff --git a/include/linux/io_uring.h b/include/linux/io_uring.h
index 934e5dd4ccc0..45253a5b9fc2 100644
--- a/include/linux/io_uring.h
+++ b/include/linux/io_uring.h
@@ -4,6 +4,7 @@
 
 #include <linux/sched.h>
 #include <linux/xarray.h>
+#include <linux/bvec.h>
 #include <uapi/linux/io_uring.h>
 
 enum io_uring_cmd_flags {
@@ -20,6 +21,26 @@ enum io_uring_cmd_flags {
 	IO_URING_F_SQE128		= (1 << 8),
 	IO_URING_F_CQE32		= (1 << 9),
 	IO_URING_F_IOPOLL		= (1 << 10),
+
+	/* for FUSED_CMD only */
+	IO_URING_F_FUSED_BUF_DEST		= (1 << 11), /* slave writes to buffer */
+	IO_URING_F_FUSED_BUF_SRC		= (1 << 12), /* slave reads from buffer */
+	/* driver incapable of FUSED_CMD should fail cmd when seeing F_FUSED */
+	IO_URING_F_FUSED		= IO_URING_F_FUSED_BUF_DEST |
+		IO_URING_F_FUSED_BUF_SRC,
+};
+
+union io_uring_fused_cmd_data {
+	/*
+	 * In case of slave request IOSQE_CQE_SKIP_SUCCESS, return slave
+	 * result via master command; otherwise we simply return success
+	 * if buffer is provided, and slave request will return its result
+	 * via its CQE
+	 */
+	s32 slave_res;
+
+	/* fused cmd private, driver do not touch it */
+	struct io_kiocb *__slave;
 };
 
 struct io_uring_cmd {
@@ -33,10 +54,31 @@ struct io_uring_cmd {
 	};
 	u32		cmd_op;
 	u32		flags;
-	u8		pdu[32]; /* available inline for free use */
+
+	/* for fused command, the available pdu is a bit less */
+	union {
+		struct {
+			union io_uring_fused_cmd_data data;
+			u8	pdu[24]; /* available inline for free use */
+		} fused;
+		u8		pdu[32]; /* available inline for free use */
+	};
+};
+
+struct io_uring_bvec_buf {
+	unsigned long	len;
+	unsigned int	nr_bvecs;
+
+	/* offset in the 1st bvec */
+	unsigned int	offset;
+	const struct bio_vec	*bvec;
+	struct bio_vec	__bvec[];
 };
 
 #if defined(CONFIG_IO_URING)
+void io_fused_cmd_start_slave_req(struct io_uring_cmd *ioucmd, bool locked,
+		const struct io_uring_bvec_buf *imu,
+		void (*complete_tw_cb)(struct io_uring_cmd *));
 int io_uring_cmd_import_fixed(u64 ubuf, unsigned long len, int rw,
 			      struct iov_iter *iter, void *ioucmd);
 void io_uring_cmd_done(struct io_uring_cmd *cmd, ssize_t ret, ssize_t res2);
@@ -66,6 +108,11 @@ static inline void io_uring_free(struct task_struct *tsk)
 		__io_uring_free(tsk);
 }
 #else
+static inline void io_fused_cmd_start_slave_req(struct io_uring_cmd *ioucmd,
+		bool locked, const struct io_uring_bvec_buf *fused_cmd_kbuf,
+		unsigned int len, void (*complete_tw_cb)(struct io_uring_cmd *))
+{
+}
 static inline int io_uring_cmd_import_fixed(u64 ubuf, unsigned long len, int rw,
 			      struct iov_iter *iter, void *ioucmd)
 {
diff --git a/include/linux/io_uring_types.h b/include/linux/io_uring_types.h
index aab657cd2b77..22920d7b12a5 100644
--- a/include/linux/io_uring_types.h
+++ b/include/linux/io_uring_types.h
@@ -402,6 +402,7 @@ enum {
 	/* keep async read/write and isreg together and in order */
 	REQ_F_SUPPORT_NOWAIT_BIT,
 	REQ_F_ISREG_BIT,
+	REQ_F_FUSED_SLAVE_BIT,
 
 	/* not a real bit, just to check we're not overflowing the space */
 	__REQ_F_LAST_BIT,
@@ -471,6 +472,8 @@ enum {
 	REQ_F_CLEAR_POLLIN	= BIT_ULL(REQ_F_CLEAR_POLLIN_BIT),
 	/* hashed into ->cancel_hash_locked, protected by ->uring_lock */
 	REQ_F_HASH_LOCKED	= BIT_ULL(REQ_F_HASH_LOCKED_BIT),
+	/* slave request in fused cmd, won't be one uring cmd */
+	REQ_F_FUSED_SLAVE	= BIT_ULL(REQ_F_FUSED_SLAVE_BIT),
 };
 
 typedef void (*io_req_tw_func_t)(struct io_kiocb *req, bool *locked);
@@ -553,6 +556,18 @@ struct io_kiocb {
 		 * REQ_F_BUFFER_RING is set.
 		 */
 		struct io_buffer_list	*buf_list;
+
+		/*
+		 * store kernel (sub)buffer of fused master request which OP
+		 * is IORING_OP_FUSED_CMD
+		 */
+		const struct io_uring_bvec_buf *fused_cmd_kbuf;
+
+		/*
+		 * store fused command master request for fuse slave request,
+		 * which uses fuse master's io buffer for handling slave OP
+		 */
+		struct io_kiocb *fused_master_req;
 	};
 
 	union {
diff --git a/include/uapi/linux/io_uring.h b/include/uapi/linux/io_uring.h
index 1d59c816a5b8..9762a2989747 100644
--- a/include/uapi/linux/io_uring.h
+++ b/include/uapi/linux/io_uring.h
@@ -223,6 +223,7 @@ enum io_uring_op {
 	IORING_OP_URING_CMD,
 	IORING_OP_SEND_ZC,
 	IORING_OP_SENDMSG_ZC,
+	IORING_OP_FUSED_CMD,
 
 	/* this goes last, obviously */
 	IORING_OP_LAST,
diff --git a/io_uring/Makefile b/io_uring/Makefile
index 8cc8e5387a75..5301077e61c5 100644
--- a/io_uring/Makefile
+++ b/io_uring/Makefile
@@ -7,5 +7,5 @@ obj-$(CONFIG_IO_URING)		+= io_uring.o xattr.o nop.o fs.o splice.o \
 					openclose.o uring_cmd.o epoll.o \
 					statx.o net.o msg_ring.o timeout.o \
 					sqpoll.o fdinfo.o tctx.o poll.o \
-					cancel.o kbuf.o rsrc.o rw.o opdef.o notif.o
+					cancel.o kbuf.o rsrc.o rw.o opdef.o notif.o fused_cmd.o
 obj-$(CONFIG_IO_WQ)		+= io-wq.o
diff --git a/io_uring/fused_cmd.c b/io_uring/fused_cmd.c
new file mode 100644
index 000000000000..ff3921f6a5df
--- /dev/null
+++ b/io_uring/fused_cmd.c
@@ -0,0 +1,233 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/file.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/io_uring.h>
+
+#include <uapi/linux/io_uring.h>
+
+#include "io_uring.h"
+#include "opdef.h"
+#include "rsrc.h"
+#include "uring_cmd.h"
+#include "fused_cmd.h"
+
+static bool io_fused_slave_valid(const struct io_uring_sqe *sqe, u8 op)
+{
+	unsigned int sqe_flags = READ_ONCE(sqe->flags);
+
+	if (op == IORING_OP_FUSED_CMD || op == IORING_OP_URING_CMD)
+		return false;
+
+	if (sqe_flags & REQ_F_BUFFER_SELECT)
+		return false;
+
+	if (!io_issue_defs[op].fused_slave)
+		return false;
+
+	return true;
+}
+
+static inline void io_fused_cmd_update_link_flags(struct io_kiocb *req,
+		const struct io_kiocb *slave)
+{
+	/*
+	 * We have to keep slave SQE in order, so update master link flags
+	 * with slave request's given master command isn't completed until
+	 * the slave request is done
+	 */
+	if (slave->flags & (REQ_F_LINK | REQ_F_HARDLINK))
+		req->flags |= REQ_F_LINK;
+}
+
+int io_fused_cmd_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe)
+	__must_hold(&req->ctx->uring_lock)
+{
+	struct io_uring_cmd *ioucmd = io_kiocb_to_cmd(req, struct io_uring_cmd);
+	const struct io_uring_sqe *slave_sqe = sqe + 1;
+	struct io_ring_ctx *ctx = req->ctx;
+	struct io_kiocb *slave;
+	u8 slave_op;
+	int ret;
+
+	if (unlikely(!(ctx->flags & IORING_SETUP_SQE128)))
+		return -EINVAL;
+
+	if (unlikely(sqe->__pad1))
+		return -EINVAL;
+
+	ioucmd->flags = READ_ONCE(sqe->uring_cmd_flags);
+	if (unlikely(ioucmd->flags))
+		return -EINVAL;
+
+	slave_op = READ_ONCE(slave_sqe->opcode);
+	if (unlikely(!io_fused_slave_valid(slave_sqe, slave_op)))
+		return -EINVAL;
+
+	ioucmd->cmd = sqe->cmd;
+	ioucmd->cmd_op = READ_ONCE(sqe->cmd_op);
+	req->fused_cmd_kbuf = NULL;
+
+	/* take one extra reference for the slave request */
+	io_get_task_refs(1);
+
+	ret = -ENOMEM;
+	if (unlikely(!io_alloc_req(ctx, &slave)))
+		goto fail;
+
+	ret = io_init_slave_req(ctx, slave, slave_sqe);
+	if (unlikely(ret))
+		goto fail_free_req;
+
+	/*
+	 * The slave request won't be linked to io_uring submission link list,
+	 * so it can't be handled by IORING_OP_LINK_TIMEOUT, however, we can do
+	 * that on master command directly
+	 */
+	io_fused_cmd_update_link_flags(req, slave);
+
+	ioucmd->fused.data.__slave = slave;
+
+	return 0;
+
+fail_free_req:
+	io_free_req(slave);
+fail:
+	current->io_uring->cached_refs += 1;
+	return ret;
+}
+
+int io_fused_cmd(struct io_kiocb *req, unsigned int issue_flags)
+{
+	struct io_uring_cmd *ioucmd = io_kiocb_to_cmd(req, struct io_uring_cmd);
+	const struct io_kiocb *slave = ioucmd->fused.data.__slave;
+	int ret = -EINVAL;
+
+	/*
+	 * Pass buffer direction for driver to validate if the requested buffer
+	 * direction is legal
+	 */
+	if (io_issue_defs[slave->opcode].buf_dir)
+		issue_flags |= IO_URING_F_FUSED_BUF_DEST;
+	else
+		issue_flags |= IO_URING_F_FUSED_BUF_SRC;
+
+	ret = io_uring_cmd(req, issue_flags);
+	if (ret != IOU_ISSUE_SKIP_COMPLETE)
+		io_free_req(ioucmd->fused.data.__slave);
+
+	return ret;
+}
+
+int io_import_buf_for_slave(unsigned long buf_off, unsigned int len, int dir,
+		struct iov_iter *iter, struct io_kiocb *slave)
+{
+	struct io_kiocb *req = slave->fused_master_req;
+	const struct io_uring_bvec_buf *kbuf;
+	unsigned long offset;
+
+	if (unlikely(!(slave->flags & REQ_F_FUSED_SLAVE) || !req))
+		return -EINVAL;
+
+	if (unlikely(!req->fused_cmd_kbuf))
+		return -EINVAL;
+
+	/* req->fused_cmd_kbuf is immutable */
+	kbuf = req->fused_cmd_kbuf;
+	offset = kbuf->offset;
+
+	if (!kbuf->bvec)
+		return -EINVAL;
+
+	if (unlikely(buf_off > kbuf->len))
+		return -EFAULT;
+
+	if (unlikely(len > kbuf->len - buf_off))
+		return -EFAULT;
+
+	/* don't use io_import_fixed which doesn't support multipage bvec */
+	offset += buf_off;
+	iov_iter_bvec(iter, dir, kbuf->bvec, kbuf->nr_bvecs, offset + len);
+
+	if (offset)
+		iov_iter_advance(iter, offset);
+
+	return 0;
+}
+
+/*
+ * Called after slave request is completed,
+ *
+ * Return back master's fused_cmd kbuf, and notify master request by
+ * the saved callback.
+ */
+void io_fused_cmd_return_buf(struct io_kiocb *slave)
+{
+	struct io_kiocb *req = slave->fused_master_req;
+	struct io_uring_cmd *ioucmd;
+
+	if (unlikely(!req || !(slave->flags & REQ_F_FUSED_SLAVE)))
+		return;
+
+	/* return back the buffer */
+	slave->fused_master_req = NULL;
+	ioucmd = io_kiocb_to_cmd(req, struct io_uring_cmd);
+	ioucmd->fused.data.__slave = NULL;
+
+	/*
+	 * If slave OP skips CQE, return the result via master command; or
+	 * if slave request is failed, REQ_F_CQE_SKIP will be cleared, return
+	 * result too
+	 */
+	if ((slave->flags & REQ_F_CQE_SKIP) || slave->cqe.res < 0)
+		ioucmd->fused.data.slave_res = slave->cqe.res;
+	else
+		ioucmd->fused.data.slave_res = 0;
+	io_uring_cmd_complete_in_task(ioucmd, ioucmd->task_work_cb);
+}
+
+/*
+ * Called for starting slave request after master command prepared io buffer.
+ *
+ * The io buffer is represented by @fused_cmd_kbuf, which is read only for
+ * slave request, however slave request can retrieve any sub-buffer by its
+ * sqe->addr(offset) & sqe->len. For slave request, io buffer is imported
+ * by io_import_buf_for_slave().
+ *
+ * Slave request borrows master's io buffer for handling the slave operation,
+ * and the buffer is returned back via io_fused_cmd_return_buf after the slave
+ * request is completed. Meantime the master command is completed from
+ * io_fused_cmd_return_buf(). And driver gets completion notification by
+ * the passed callback of @complete_tw_cb.
+ */
+void io_fused_cmd_start_slave_req(struct io_uring_cmd *ioucmd, bool locked,
+		const struct io_uring_bvec_buf *fused_cmd_kbuf,
+		void (*complete_tw_cb)(struct io_uring_cmd *))
+{
+	struct io_kiocb *req = cmd_to_io_kiocb(ioucmd);
+	struct io_kiocb *slave = ioucmd->fused.data.__slave;
+
+	if (WARN_ON_ONCE(unlikely(!slave ||
+					!(slave->flags & REQ_F_FUSED_SLAVE))))
+		return;
+
+	/*
+	 * Once the fused slave request is completed and the buffer isn't be
+	 * used, the driver will be notified by callback of complete_tw_cb
+	 */
+	ioucmd->task_work_cb = complete_tw_cb;
+
+	/* now we get the buffer */
+	req->fused_cmd_kbuf = fused_cmd_kbuf;
+	slave->fused_master_req = req;
+
+	trace_io_uring_submit_sqe(slave, true);
+	if (locked)
+		io_req_task_submit(slave, &locked);
+	else
+		io_req_task_queue(slave);
+}
+EXPORT_SYMBOL_GPL(io_fused_cmd_start_slave_req);
diff --git a/io_uring/fused_cmd.h b/io_uring/fused_cmd.h
new file mode 100644
index 000000000000..0a3fc8c69870
--- /dev/null
+++ b/io_uring/fused_cmd.h
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0
+#ifndef IOU_FUSED_CMD_H
+#define IOU_FUSED_CMD_H
+
+int io_fused_cmd_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe);
+int io_fused_cmd(struct io_kiocb *req, unsigned int issue_flags);
+void io_fused_cmd_return_buf(struct io_kiocb *slave);
+int io_import_buf_for_slave(unsigned long buf, unsigned int len, int dir,
+		struct iov_iter *iter, struct io_kiocb *slave);
+
+#endif
diff --git a/io_uring/io_uring.c b/io_uring/io_uring.c
index 449508912a9c..e5e43637d313 100644
--- a/io_uring/io_uring.c
+++ b/io_uring/io_uring.c
@@ -92,6 +92,7 @@
 #include "cancel.h"
 #include "net.h"
 #include "notif.h"
+#include "fused_cmd.h"
 
 #include "timeout.h"
 #include "poll.h"
@@ -111,7 +112,7 @@
 
 #define IO_REQ_CLEAN_FLAGS (REQ_F_BUFFER_SELECTED | REQ_F_NEED_CLEANUP | \
 				REQ_F_POLLED | REQ_F_INFLIGHT | REQ_F_CREDS | \
-				REQ_F_ASYNC_DATA)
+				REQ_F_ASYNC_DATA | REQ_F_FUSED_SLAVE)
 
 #define IO_REQ_CLEAN_SLOW_FLAGS (REQ_F_REFCOUNT | REQ_F_LINK | REQ_F_HARDLINK |\
 				 IO_REQ_CLEAN_FLAGS)
@@ -971,6 +972,9 @@ static void __io_req_complete_post(struct io_kiocb *req)
 {
 	struct io_ring_ctx *ctx = req->ctx;
 
+	if (req->flags & REQ_F_FUSED_SLAVE)
+		io_fused_cmd_return_buf(req);
+
 	io_cq_lock(ctx);
 	if (!(req->flags & REQ_F_CQE_SKIP))
 		io_fill_cqe_req(ctx, req);
@@ -1855,6 +1859,8 @@ static void io_clean_op(struct io_kiocb *req)
 		spin_lock(&req->ctx->completion_lock);
 		io_put_kbuf_comp(req);
 		spin_unlock(&req->ctx->completion_lock);
+	} else if (req->flags & REQ_F_FUSED_SLAVE) {
+		io_fused_cmd_return_buf(req);
 	}
 
 	if (req->flags & REQ_F_NEED_CLEANUP) {
@@ -2163,8 +2169,8 @@ static void io_init_req_drain(struct io_kiocb *req)
 	}
 }
 
-static int io_init_req(struct io_ring_ctx *ctx, struct io_kiocb *req,
-		       const struct io_uring_sqe *sqe)
+static inline int io_init_req(struct io_ring_ctx *ctx, struct io_kiocb *req,
+		const struct io_uring_sqe *sqe, bool slave)
 	__must_hold(&ctx->uring_lock)
 {
 	const struct io_issue_def *def;
@@ -2217,6 +2223,12 @@ static int io_init_req(struct io_ring_ctx *ctx, struct io_kiocb *req,
 		}
 	}
 
+	if (slave) {
+		if (!def->fused_slave)
+		       return -EINVAL;
+		req->flags |= REQ_F_FUSED_SLAVE;
+	}
+
 	if (!def->ioprio && sqe->ioprio)
 		return -EINVAL;
 	if (!def->iopoll && (ctx->flags & IORING_SETUP_IOPOLL))
@@ -2257,6 +2269,12 @@ static int io_init_req(struct io_ring_ctx *ctx, struct io_kiocb *req,
 	return def->prep(req, sqe);
 }
 
+int io_init_slave_req(struct io_ring_ctx *ctx, struct io_kiocb *req,
+		const struct io_uring_sqe *sqe)
+{
+	return io_init_req(ctx, req, sqe, true);
+}
+
 static __cold int io_submit_fail_init(const struct io_uring_sqe *sqe,
 				      struct io_kiocb *req, int ret)
 {
@@ -2301,7 +2319,7 @@ static inline int io_submit_sqe(struct io_ring_ctx *ctx, struct io_kiocb *req,
 	struct io_submit_link *link = &ctx->submit_state.link;
 	int ret;
 
-	ret = io_init_req(ctx, req, sqe);
+	ret = io_init_req(ctx, req, sqe, false);
 	if (unlikely(ret))
 		return io_submit_fail_init(sqe, req, ret);
 
diff --git a/io_uring/io_uring.h b/io_uring/io_uring.h
index 2711865f1e19..637e12e4fb9f 100644
--- a/io_uring/io_uring.h
+++ b/io_uring/io_uring.h
@@ -78,6 +78,9 @@ bool __io_alloc_req_refill(struct io_ring_ctx *ctx);
 bool io_match_task_safe(struct io_kiocb *head, struct task_struct *task,
 			bool cancel_all);
 
+int io_init_slave_req(struct io_ring_ctx *ctx, struct io_kiocb *req,
+		const struct io_uring_sqe *sqe);
+
 #define io_lockdep_assert_cq_locked(ctx)				\
 	do {								\
 		if (ctx->flags & IORING_SETUP_IOPOLL) {			\
diff --git a/io_uring/opdef.c b/io_uring/opdef.c
index cca7c5b55208..63b90e8e65f8 100644
--- a/io_uring/opdef.c
+++ b/io_uring/opdef.c
@@ -33,6 +33,7 @@
 #include "poll.h"
 #include "cancel.h"
 #include "rw.h"
+#include "fused_cmd.h"
 
 static int io_no_issue(struct io_kiocb *req, unsigned int issue_flags)
 {
@@ -428,6 +429,12 @@ const struct io_issue_def io_issue_defs[] = {
 		.prep			= io_eopnotsupp_prep,
 #endif
 	},
+	[IORING_OP_FUSED_CMD] = {
+		.needs_file		= 1,
+		.plug			= 1,
+		.prep			= io_fused_cmd_prep,
+		.issue			= io_fused_cmd,
+	},
 };
 
 
@@ -648,6 +655,11 @@ const struct io_cold_def io_cold_defs[] = {
 		.fail			= io_sendrecv_fail,
 #endif
 	},
+	[IORING_OP_FUSED_CMD] = {
+		.name			= "FUSED_CMD",
+		.async_size		= uring_cmd_pdu_size(1),
+		.prep_async		= io_uring_cmd_prep_async,
+	},
 };
 
 const char *io_uring_get_opcode(u8 opcode)
diff --git a/io_uring/opdef.h b/io_uring/opdef.h
index c22c8696e749..ab81c54e9cad 100644
--- a/io_uring/opdef.h
+++ b/io_uring/opdef.h
@@ -29,6 +29,13 @@ struct io_issue_def {
 	unsigned		iopoll_queue : 1;
 	/* opcode specific path will handle ->async_data allocation if needed */
 	unsigned		manual_alloc : 1;
+	/* can be slave op of fused command */
+	unsigned		fused_slave : 1;
+	/*
+	 * buffer direction, 0 : read from buffer, 1: write to buffer, used
+	 * for fused_slave only
+	*/
+	unsigned		buf_dir : 1;
 
 	int (*issue)(struct io_kiocb *, unsigned int);
 	int (*prep)(struct io_kiocb *, const struct io_uring_sqe *);
-- 
2.39.2


^ permalink raw reply related	[flat|nested] 28+ messages in thread

* [PATCH V4 03/17] io_uring: support normal SQE for fused command
  2023-03-24 13:57 ` [PATCH V4 00/17] io_uring/ublk: add IORING_OP_FUSED_CMD Ming Lei
  2023-03-24 13:57   ` [PATCH V4 01/17] io_uring: increase io_kiocb->flags into 64bit Ming Lei
  2023-03-24 13:57   ` [PATCH V4 02/17] io_uring: add IORING_OP_FUSED_CMD Ming Lei
@ 2023-03-24 13:57   ` Ming Lei
  2023-03-24 13:57   ` [PATCH V4 04/17] io_uring: support OP_READ/OP_WRITE for fused slave request Ming Lei
                     ` (15 subsequent siblings)
  18 siblings, 0 replies; 28+ messages in thread
From: Ming Lei @ 2023-03-24 13:57 UTC (permalink / raw)
  To: Jens Axboe, io-uring, linux-block
  Cc: linux-kernel, Miklos Szeredi, ZiyangZhang, Xiaoguang Wang,
	Bernd Schubert, Pavel Begunkov, Stefan Hajnoczi, Ming Lei

So far, the slave sqe is saved in the 2nd 64 byte of master sqe, which
requires that SQE128 has to be enabled. Relax this limit by allowing to
fetch slave SQE from SQ directly.

IORING_URING_CMD_FUSED_SPLIT_SQE has to be set for this usage, and
userspace has to put slave SQE following the master sqe.

However, not sure if this way is useful, given fused command needs at least
two SQEs for running io in fast path, and SQE128 matches this usecase
perfectly.

Signed-off-by: Ming Lei <[email protected]>
---
 include/uapi/linux/io_uring.h |  8 ++++++-
 io_uring/fused_cmd.c          | 42 ++++++++++++++++++++++++++++-------
 io_uring/io_uring.c           | 22 ++++++++++++------
 io_uring/io_uring.h           |  1 +
 4 files changed, 57 insertions(+), 16 deletions(-)

diff --git a/include/uapi/linux/io_uring.h b/include/uapi/linux/io_uring.h
index 9762a2989747..6f25ca85639f 100644
--- a/include/uapi/linux/io_uring.h
+++ b/include/uapi/linux/io_uring.h
@@ -233,9 +233,15 @@ enum io_uring_op {
  * sqe->uring_cmd_flags
  * IORING_URING_CMD_FIXED	use registered buffer; pass this flag
  *				along with setting sqe->buf_index.
+ *
+ * IORING_URING_CMD_FUSED_SPLIT_SQE fused command only, slave sqe is
+ * 				    provided from another new sqe; without
+ * 				    setting the flag, slave sqe is from
+ * 				    2nd 64byte of this sqe, so SQE128 has
+ * 				    to be enabled
  */
 #define IORING_URING_CMD_FIXED	(1U << 0)
-
+#define IORING_URING_CMD_FUSED_SPLIT_SQE	(1U << 1)
 
 /*
  * sqe->fsync_flags
diff --git a/io_uring/fused_cmd.c b/io_uring/fused_cmd.c
index ff3921f6a5df..4cfe02e316f9 100644
--- a/io_uring/fused_cmd.c
+++ b/io_uring/fused_cmd.c
@@ -43,24 +43,45 @@ static inline void io_fused_cmd_update_link_flags(struct io_kiocb *req,
 		req->flags |= REQ_F_LINK;
 }
 
+static const struct io_uring_sqe *fused_cmd_get_slave_sqe(
+		struct io_ring_ctx *ctx, const struct io_uring_sqe *master,
+		bool split_sqe)
+{
+	if (unlikely(!(ctx->flags & IORING_SETUP_SQE128) && !split_sqe))
+		return NULL;
+
+	if (split_sqe) {
+		const struct io_uring_sqe *sqe;
+
+		if (unlikely(!io_get_slave_sqe(ctx, &sqe)))
+			return NULL;
+		return sqe;
+	}
+
+	return master + 1;
+}
+
 int io_fused_cmd_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe)
 	__must_hold(&req->ctx->uring_lock)
 {
 	struct io_uring_cmd *ioucmd = io_kiocb_to_cmd(req, struct io_uring_cmd);
-	const struct io_uring_sqe *slave_sqe = sqe + 1;
+	const struct io_uring_sqe *slave_sqe;
 	struct io_ring_ctx *ctx = req->ctx;
 	struct io_kiocb *slave;
 	u8 slave_op;
 	int ret;
-
-	if (unlikely(!(ctx->flags & IORING_SETUP_SQE128)))
-		return -EINVAL;
+	bool split_sqe;
 
 	if (unlikely(sqe->__pad1))
 		return -EINVAL;
 
 	ioucmd->flags = READ_ONCE(sqe->uring_cmd_flags);
-	if (unlikely(ioucmd->flags))
+	if (unlikely(ioucmd->flags & ~IORING_URING_CMD_FUSED_SPLIT_SQE))
+		return -EINVAL;
+
+	split_sqe = ioucmd->flags & IORING_URING_CMD_FUSED_SPLIT_SQE;
+	slave_sqe = fused_cmd_get_slave_sqe(ctx, sqe, split_sqe);
+	if (unlikely(!slave_sqe))
 		return -EINVAL;
 
 	slave_op = READ_ONCE(slave_sqe->opcode);
@@ -71,8 +92,12 @@ int io_fused_cmd_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe)
 	ioucmd->cmd_op = READ_ONCE(sqe->cmd_op);
 	req->fused_cmd_kbuf = NULL;
 
-	/* take one extra reference for the slave request */
-	io_get_task_refs(1);
+	/*
+	 * Take one extra reference for the slave request built from
+	 * builtin SQE since io_uring core code doesn't grab it for us
+	 */
+	if (!split_sqe)
+		io_get_task_refs(1);
 
 	ret = -ENOMEM;
 	if (unlikely(!io_alloc_req(ctx, &slave)))
@@ -96,7 +121,8 @@ int io_fused_cmd_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe)
 fail_free_req:
 	io_free_req(slave);
 fail:
-	current->io_uring->cached_refs += 1;
+	if (!split_sqe)
+		current->io_uring->cached_refs += 1;
 	return ret;
 }
 
diff --git a/io_uring/io_uring.c b/io_uring/io_uring.c
index e5e43637d313..b0008d380686 100644
--- a/io_uring/io_uring.c
+++ b/io_uring/io_uring.c
@@ -2414,7 +2414,8 @@ static void io_commit_sqring(struct io_ring_ctx *ctx)
  * used, it's important that those reads are done through READ_ONCE() to
  * prevent a re-load down the line.
  */
-static bool io_get_sqe(struct io_ring_ctx *ctx, const struct io_uring_sqe **sqe)
+static inline bool io_get_sqe(struct io_ring_ctx *ctx,
+		const struct io_uring_sqe **sqe)
 {
 	unsigned head, mask = ctx->sq_entries - 1;
 	unsigned sq_idx = ctx->cached_sq_head++ & mask;
@@ -2443,19 +2444,25 @@ static bool io_get_sqe(struct io_ring_ctx *ctx, const struct io_uring_sqe **sqe)
 	return false;
 }
 
+bool io_get_slave_sqe(struct io_ring_ctx *ctx, const struct io_uring_sqe **sqe)
+{
+	return io_get_sqe(ctx, sqe);
+}
+
 int io_submit_sqes(struct io_ring_ctx *ctx, unsigned int nr)
 	__must_hold(&ctx->uring_lock)
 {
 	unsigned int entries = io_sqring_entries(ctx);
-	unsigned int left;
+	unsigned old_head = ctx->cached_sq_head;
+	unsigned int left = 0;
 	int ret;
 
 	if (unlikely(!entries))
 		return 0;
 	/* make sure SQ entry isn't read before tail */
-	ret = left = min3(nr, ctx->sq_entries, entries);
-	io_get_task_refs(left);
-	io_submit_state_start(&ctx->submit_state, left);
+	ret = min3(nr, ctx->sq_entries, entries);
+	io_get_task_refs(ret);
+	io_submit_state_start(&ctx->submit_state, ret);
 
 	do {
 		const struct io_uring_sqe *sqe;
@@ -2474,11 +2481,12 @@ int io_submit_sqes(struct io_ring_ctx *ctx, unsigned int nr)
 		 */
 		if (unlikely(io_submit_sqe(ctx, req, sqe)) &&
 		    !(ctx->flags & IORING_SETUP_SUBMIT_ALL)) {
-			left--;
+			left = 1;
 			break;
 		}
-	} while (--left);
+	} while ((ctx->cached_sq_head - old_head) < ret);
 
+	left = ret - (ctx->cached_sq_head - old_head) - left;
 	if (unlikely(left)) {
 		ret -= left;
 		/* try again if it submitted nothing and can't allocate a req */
diff --git a/io_uring/io_uring.h b/io_uring/io_uring.h
index 637e12e4fb9f..ee22e65c4aef 100644
--- a/io_uring/io_uring.h
+++ b/io_uring/io_uring.h
@@ -78,6 +78,7 @@ bool __io_alloc_req_refill(struct io_ring_ctx *ctx);
 bool io_match_task_safe(struct io_kiocb *head, struct task_struct *task,
 			bool cancel_all);
 
+bool io_get_slave_sqe(struct io_ring_ctx *ctx, const struct io_uring_sqe **sqe);
 int io_init_slave_req(struct io_ring_ctx *ctx, struct io_kiocb *req,
 		const struct io_uring_sqe *sqe);
 
-- 
2.39.2


^ permalink raw reply related	[flat|nested] 28+ messages in thread

* [PATCH V4 04/17] io_uring: support OP_READ/OP_WRITE for fused slave request
  2023-03-24 13:57 ` [PATCH V4 00/17] io_uring/ublk: add IORING_OP_FUSED_CMD Ming Lei
                     ` (2 preceding siblings ...)
  2023-03-24 13:57   ` [PATCH V4 03/17] io_uring: support normal SQE for fused command Ming Lei
@ 2023-03-24 13:57   ` Ming Lei
  2023-03-24 13:57   ` [PATCH V4 05/17] io_uring: support OP_SEND_ZC/OP_RECV " Ming Lei
                     ` (14 subsequent siblings)
  18 siblings, 0 replies; 28+ messages in thread
From: Ming Lei @ 2023-03-24 13:57 UTC (permalink / raw)
  To: Jens Axboe, io-uring, linux-block
  Cc: linux-kernel, Miklos Szeredi, ZiyangZhang, Xiaoguang Wang,
	Bernd Schubert, Pavel Begunkov, Stefan Hajnoczi, Ming Lei

Start to allow fused slave request to support OP_READ/OP_WRITE, and
the buffer can be retrieved from master request.

Once the slave request is completed, the master buffer will be returned
back.

Signed-off-by: Ming Lei <[email protected]>
---
 io_uring/opdef.c |  4 ++++
 io_uring/rw.c    | 20 ++++++++++++++++++++
 2 files changed, 24 insertions(+)

diff --git a/io_uring/opdef.c b/io_uring/opdef.c
index 63b90e8e65f8..9b376df91abd 100644
--- a/io_uring/opdef.c
+++ b/io_uring/opdef.c
@@ -235,6 +235,8 @@ const struct io_issue_def io_issue_defs[] = {
 		.ioprio			= 1,
 		.iopoll			= 1,
 		.iopoll_queue		= 1,
+		.fused_slave		= 1,
+		.buf_dir		= WRITE,
 		.prep			= io_prep_rw,
 		.issue			= io_read,
 	},
@@ -248,6 +250,8 @@ const struct io_issue_def io_issue_defs[] = {
 		.ioprio			= 1,
 		.iopoll			= 1,
 		.iopoll_queue		= 1,
+		.fused_slave		= 1,
+		.buf_dir		= READ,
 		.prep			= io_prep_rw,
 		.issue			= io_write,
 	},
diff --git a/io_uring/rw.c b/io_uring/rw.c
index 4c233910e200..0c292ef9a40f 100644
--- a/io_uring/rw.c
+++ b/io_uring/rw.c
@@ -19,6 +19,7 @@
 #include "kbuf.h"
 #include "rsrc.h"
 #include "rw.h"
+#include "fused_cmd.h"
 
 struct io_rw {
 	/* NOTE: kiocb has the file as the first member, so don't do it here */
@@ -371,6 +372,17 @@ static struct iovec *__io_import_iovec(int ddir, struct io_kiocb *req,
 	size_t sqe_len;
 	ssize_t ret;
 
+	/*
+	 * SLAVE OP passes buffer offset from sqe->addr actually, since
+	 * the fused cmd kbuf's mapped start address is zero.
+	 */
+	if (req->flags & REQ_F_FUSED_SLAVE) {
+		ret = io_import_buf_for_slave(rw->addr, rw->len, ddir, iter, req);
+		if (ret)
+			return ERR_PTR(ret);
+		return NULL;
+	}
+
 	if (opcode == IORING_OP_READ_FIXED || opcode == IORING_OP_WRITE_FIXED) {
 		ret = io_import_fixed(ddir, iter, req->imu, rw->addr, rw->len);
 		if (ret)
@@ -428,11 +440,19 @@ static inline loff_t *io_kiocb_ppos(struct kiocb *kiocb)
  */
 static ssize_t loop_rw_iter(int ddir, struct io_rw *rw, struct iov_iter *iter)
 {
+	struct io_kiocb *req = cmd_to_io_kiocb(rw);
 	struct kiocb *kiocb = &rw->kiocb;
 	struct file *file = kiocb->ki_filp;
 	ssize_t ret = 0;
 	loff_t *ppos;
 
+	/*
+	 * Fused slave req hasn't user buffer, so ->read/->write can't
+	 * be supported
+	 */
+	if (req->flags & REQ_F_FUSED_SLAVE)
+		return -EOPNOTSUPP;
+
 	/*
 	 * Don't support polled IO through this interface, and we can't
 	 * support non-blocking either. For the latter, this just causes
-- 
2.39.2


^ permalink raw reply related	[flat|nested] 28+ messages in thread

* [PATCH V4 05/17] io_uring: support OP_SEND_ZC/OP_RECV for fused slave request
  2023-03-24 13:57 ` [PATCH V4 00/17] io_uring/ublk: add IORING_OP_FUSED_CMD Ming Lei
                     ` (3 preceding siblings ...)
  2023-03-24 13:57   ` [PATCH V4 04/17] io_uring: support OP_READ/OP_WRITE for fused slave request Ming Lei
@ 2023-03-24 13:57   ` Ming Lei
  2023-03-24 13:57   ` [PATCH V4 06/17] block: ublk_drv: mark device as LIVE before adding disk Ming Lei
                     ` (13 subsequent siblings)
  18 siblings, 0 replies; 28+ messages in thread
From: Ming Lei @ 2023-03-24 13:57 UTC (permalink / raw)
  To: Jens Axboe, io-uring, linux-block
  Cc: linux-kernel, Miklos Szeredi, ZiyangZhang, Xiaoguang Wang,
	Bernd Schubert, Pavel Begunkov, Stefan Hajnoczi, Ming Lei

Start to allow fused slave request to support OP_SEND_ZC/OP_RECV, and
the buffer can be retrieved from master request.

Once the slave request is completed, the master buffer will be returned
back.

Signed-off-by: Ming Lei <[email protected]>
---
 io_uring/net.c   | 30 ++++++++++++++++++++++++++++--
 io_uring/opdef.c |  6 ++++++
 2 files changed, 34 insertions(+), 2 deletions(-)

diff --git a/io_uring/net.c b/io_uring/net.c
index b7f190ca528e..bc33f89f61b3 100644
--- a/io_uring/net.c
+++ b/io_uring/net.c
@@ -16,6 +16,7 @@
 #include "net.h"
 #include "notif.h"
 #include "rsrc.h"
+#include "fused_cmd.h"
 
 #if defined(CONFIG_NET)
 struct io_shutdown {
@@ -68,6 +69,13 @@ struct io_sr_msg {
 	struct io_kiocb 		*notif;
 };
 
+#define user_ptr_to_u64(x) (		\
+{					\
+	typecheck(void __user *, (x));		\
+	(u64)(unsigned long)(x);	\
+}					\
+)
+
 static inline bool io_check_multishot(struct io_kiocb *req,
 				      unsigned int issue_flags)
 {
@@ -378,7 +386,11 @@ int io_send(struct io_kiocb *req, unsigned int issue_flags)
 	if (unlikely(!sock))
 		return -ENOTSOCK;
 
-	ret = import_ubuf(ITER_SOURCE, sr->buf, sr->len, &msg.msg_iter);
+	if (!(req->flags & REQ_F_FUSED_SLAVE))
+		ret = import_ubuf(ITER_SOURCE, sr->buf, sr->len, &msg.msg_iter);
+	else
+		ret = io_import_buf_for_slave(user_ptr_to_u64(sr->buf),
+				sr->len, ITER_SOURCE, &msg.msg_iter, req);
 	if (unlikely(ret))
 		return ret;
 
@@ -869,7 +881,11 @@ int io_recv(struct io_kiocb *req, unsigned int issue_flags)
 		sr->buf = buf;
 	}
 
-	ret = import_ubuf(ITER_DEST, sr->buf, len, &msg.msg_iter);
+	if (!(req->flags & REQ_F_FUSED_SLAVE))
+		ret = import_ubuf(ITER_DEST, sr->buf, len, &msg.msg_iter);
+	else
+		ret = io_import_buf_for_slave(user_ptr_to_u64(sr->buf),
+				sr->len, ITER_DEST, &msg.msg_iter, req);
 	if (unlikely(ret))
 		goto out_free;
 
@@ -983,6 +999,9 @@ int io_send_zc_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe)
 	if (zc->flags & IORING_RECVSEND_FIXED_BUF) {
 		unsigned idx = READ_ONCE(sqe->buf_index);
 
+		if (req->flags & REQ_F_FUSED_SLAVE)
+			return -EINVAL;
+
 		if (unlikely(idx >= ctx->nr_user_bufs))
 			return -EFAULT;
 		idx = array_index_nospec(idx, ctx->nr_user_bufs);
@@ -1119,8 +1138,15 @@ int io_send_zc(struct io_kiocb *req, unsigned int issue_flags)
 		if (unlikely(ret))
 			return ret;
 		msg.sg_from_iter = io_sg_from_iter;
+	} else if (req->flags & REQ_F_FUSED_SLAVE) {
+		ret = io_import_buf_for_slave(user_ptr_to_u64(zc->buf),
+				zc->len, ITER_SOURCE, &msg.msg_iter, req);
+		if (unlikely(ret))
+			return ret;
+		msg.sg_from_iter = io_sg_from_iter;
 	} else {
 		io_notif_set_extended(zc->notif);
+
 		ret = import_ubuf(ITER_SOURCE, zc->buf, zc->len, &msg.msg_iter);
 		if (unlikely(ret))
 			return ret;
diff --git a/io_uring/opdef.c b/io_uring/opdef.c
index 9b376df91abd..e7d75bf69c0f 100644
--- a/io_uring/opdef.c
+++ b/io_uring/opdef.c
@@ -273,6 +273,8 @@ const struct io_issue_def io_issue_defs[] = {
 		.audit_skip		= 1,
 		.ioprio			= 1,
 		.manual_alloc		= 1,
+		.fused_slave		= 1,
+		.buf_dir		= READ,
 #if defined(CONFIG_NET)
 		.prep			= io_sendmsg_prep,
 		.issue			= io_send,
@@ -287,6 +289,8 @@ const struct io_issue_def io_issue_defs[] = {
 		.buffer_select		= 1,
 		.audit_skip		= 1,
 		.ioprio			= 1,
+		.fused_slave		= 1,
+		.buf_dir		= WRITE,
 #if defined(CONFIG_NET)
 		.prep			= io_recvmsg_prep,
 		.issue			= io_recv,
@@ -413,6 +417,8 @@ const struct io_issue_def io_issue_defs[] = {
 		.audit_skip		= 1,
 		.ioprio			= 1,
 		.manual_alloc		= 1,
+		.fused_slave		= 1,
+		.buf_dir		= READ,
 #if defined(CONFIG_NET)
 		.prep			= io_send_zc_prep,
 		.issue			= io_send_zc,
-- 
2.39.2


^ permalink raw reply related	[flat|nested] 28+ messages in thread

* [PATCH V4 06/17] block: ublk_drv: mark device as LIVE before adding disk
  2023-03-24 13:57 ` [PATCH V4 00/17] io_uring/ublk: add IORING_OP_FUSED_CMD Ming Lei
                     ` (4 preceding siblings ...)
  2023-03-24 13:57   ` [PATCH V4 05/17] io_uring: support OP_SEND_ZC/OP_RECV " Ming Lei
@ 2023-03-24 13:57   ` Ming Lei
  2023-03-24 13:57   ` [PATCH V4 07/17] block: ublk_drv: add common exit handling Ming Lei
                     ` (12 subsequent siblings)
  18 siblings, 0 replies; 28+ messages in thread
From: Ming Lei @ 2023-03-24 13:57 UTC (permalink / raw)
  To: Jens Axboe, io-uring, linux-block
  Cc: linux-kernel, Miklos Szeredi, ZiyangZhang, Xiaoguang Wang,
	Bernd Schubert, Pavel Begunkov, Stefan Hajnoczi, Ming Lei

IO can be started before add_disk() returns, such as reading parititon table,
then the monitor work should work for making forward progress.

So mark device as LIVE before adding disk, meantime change to
DEAD if add_disk() fails.

Reviewed-by: Ziyang Zhang <[email protected]>
Signed-off-by: Ming Lei <[email protected]>
---
 drivers/block/ublk_drv.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/block/ublk_drv.c b/drivers/block/ublk_drv.c
index d1d1c8d606c8..fb5a557afde8 100644
--- a/drivers/block/ublk_drv.c
+++ b/drivers/block/ublk_drv.c
@@ -1602,17 +1602,18 @@ static int ublk_ctrl_start_dev(struct ublk_device *ub, struct io_uring_cmd *cmd)
 		set_bit(GD_SUPPRESS_PART_SCAN, &disk->state);
 
 	get_device(&ub->cdev_dev);
+	ub->dev_info.state = UBLK_S_DEV_LIVE;
 	ret = add_disk(disk);
 	if (ret) {
 		/*
 		 * Has to drop the reference since ->free_disk won't be
 		 * called in case of add_disk failure.
 		 */
+		ub->dev_info.state = UBLK_S_DEV_DEAD;
 		ublk_put_device(ub);
 		goto out_put_disk;
 	}
 	set_bit(UB_STATE_USED, &ub->state);
-	ub->dev_info.state = UBLK_S_DEV_LIVE;
 out_put_disk:
 	if (ret)
 		put_disk(disk);
-- 
2.39.2


^ permalink raw reply related	[flat|nested] 28+ messages in thread

* [PATCH V4 07/17] block: ublk_drv: add common exit handling
  2023-03-24 13:57 ` [PATCH V4 00/17] io_uring/ublk: add IORING_OP_FUSED_CMD Ming Lei
                     ` (5 preceding siblings ...)
  2023-03-24 13:57   ` [PATCH V4 06/17] block: ublk_drv: mark device as LIVE before adding disk Ming Lei
@ 2023-03-24 13:57   ` Ming Lei
  2023-03-24 13:57   ` [PATCH V4 08/17] block: ublk_drv: don't consider flush request in map/unmap io Ming Lei
                     ` (11 subsequent siblings)
  18 siblings, 0 replies; 28+ messages in thread
From: Ming Lei @ 2023-03-24 13:57 UTC (permalink / raw)
  To: Jens Axboe, io-uring, linux-block
  Cc: linux-kernel, Miklos Szeredi, ZiyangZhang, Xiaoguang Wang,
	Bernd Schubert, Pavel Begunkov, Stefan Hajnoczi, Ming Lei

Simplify exit handling a bit, and prepare for supporting fused command.

Reviewed-by: Ziyang Zhang <[email protected]>
Signed-off-by: Ming Lei <[email protected]>
---
 drivers/block/ublk_drv.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/drivers/block/ublk_drv.c b/drivers/block/ublk_drv.c
index fb5a557afde8..b8998ed87a0f 100644
--- a/drivers/block/ublk_drv.c
+++ b/drivers/block/ublk_drv.c
@@ -655,14 +655,15 @@ static void ublk_complete_rq(struct request *req)
 	struct ublk_queue *ubq = req->mq_hctx->driver_data;
 	struct ublk_io *io = &ubq->ios[req->tag];
 	unsigned int unmapped_bytes;
+	blk_status_t res = BLK_STS_OK;
 
 	/* failed read IO if nothing is read */
 	if (!io->res && req_op(req) == REQ_OP_READ)
 		io->res = -EIO;
 
 	if (io->res < 0) {
-		blk_mq_end_request(req, errno_to_blk_status(io->res));
-		return;
+		res = errno_to_blk_status(io->res);
+		goto exit;
 	}
 
 	/*
@@ -671,10 +672,8 @@ static void ublk_complete_rq(struct request *req)
 	 *
 	 * Both the two needn't unmap.
 	 */
-	if (req_op(req) != REQ_OP_READ && req_op(req) != REQ_OP_WRITE) {
-		blk_mq_end_request(req, BLK_STS_OK);
-		return;
-	}
+	if (req_op(req) != REQ_OP_READ && req_op(req) != REQ_OP_WRITE)
+		goto exit;
 
 	/* for READ request, writing data in iod->addr to rq buffers */
 	unmapped_bytes = ublk_unmap_io(ubq, req, io);
@@ -691,6 +690,10 @@ static void ublk_complete_rq(struct request *req)
 		blk_mq_requeue_request(req, true);
 	else
 		__blk_mq_end_request(req, BLK_STS_OK);
+
+	return;
+exit:
+	blk_mq_end_request(req, res);
 }
 
 /*
-- 
2.39.2


^ permalink raw reply related	[flat|nested] 28+ messages in thread

* [PATCH V4 08/17] block: ublk_drv: don't consider flush request in map/unmap io
  2023-03-24 13:57 ` [PATCH V4 00/17] io_uring/ublk: add IORING_OP_FUSED_CMD Ming Lei
                     ` (6 preceding siblings ...)
  2023-03-24 13:57   ` [PATCH V4 07/17] block: ublk_drv: add common exit handling Ming Lei
@ 2023-03-24 13:57   ` Ming Lei
  2023-03-24 13:58   ` [PATCH V4 09/17] block: ublk_drv: add two helpers to clean up map/unmap request Ming Lei
                     ` (10 subsequent siblings)
  18 siblings, 0 replies; 28+ messages in thread
From: Ming Lei @ 2023-03-24 13:57 UTC (permalink / raw)
  To: Jens Axboe, io-uring, linux-block
  Cc: linux-kernel, Miklos Szeredi, ZiyangZhang, Xiaoguang Wang,
	Bernd Schubert, Pavel Begunkov, Stefan Hajnoczi, Ming Lei

There isn't data in request of REQ_OP_FLUSH always, so don't consider
it in both ublk_map_io() and ublk_unmap_io().

Reviewed-by: Ziyang Zhang <[email protected]>
Signed-off-by: Ming Lei <[email protected]>
---
 drivers/block/ublk_drv.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)

diff --git a/drivers/block/ublk_drv.c b/drivers/block/ublk_drv.c
index b8998ed87a0f..4fe324da97a0 100644
--- a/drivers/block/ublk_drv.c
+++ b/drivers/block/ublk_drv.c
@@ -529,15 +529,13 @@ static int ublk_map_io(const struct ublk_queue *ubq, const struct request *req,
 		struct ublk_io *io)
 {
 	const unsigned int rq_bytes = blk_rq_bytes(req);
+
 	/*
 	 * no zero copy, we delay copy WRITE request data into ublksrv
 	 * context and the big benefit is that pinning pages in current
 	 * context is pretty fast, see ublk_pin_user_pages
 	 */
-	if (req_op(req) != REQ_OP_WRITE && req_op(req) != REQ_OP_FLUSH)
-		return rq_bytes;
-
-	if (ublk_rq_has_data(req)) {
+	if (ublk_rq_has_data(req) && req_op(req) == REQ_OP_WRITE) {
 		struct ublk_map_data data = {
 			.ubq	=	ubq,
 			.rq	=	req,
@@ -772,9 +770,7 @@ static inline void __ublk_rq_task_work(struct request *req)
 		return;
 	}
 
-	if (ublk_need_get_data(ubq) &&
-			(req_op(req) == REQ_OP_WRITE ||
-			req_op(req) == REQ_OP_FLUSH)) {
+	if (ublk_need_get_data(ubq) && (req_op(req) == REQ_OP_WRITE)) {
 		/*
 		 * We have not handled UBLK_IO_NEED_GET_DATA command yet,
 		 * so immepdately pass UBLK_IO_RES_NEED_GET_DATA to ublksrv
-- 
2.39.2


^ permalink raw reply related	[flat|nested] 28+ messages in thread

* [PATCH V4 09/17] block: ublk_drv: add two helpers to clean up map/unmap request
  2023-03-24 13:57 ` [PATCH V4 00/17] io_uring/ublk: add IORING_OP_FUSED_CMD Ming Lei
                     ` (7 preceding siblings ...)
  2023-03-24 13:57   ` [PATCH V4 08/17] block: ublk_drv: don't consider flush request in map/unmap io Ming Lei
@ 2023-03-24 13:58   ` Ming Lei
  2023-03-24 13:58   ` [PATCH V4 10/17] block: ublk_drv: clean up several helpers Ming Lei
                     ` (9 subsequent siblings)
  18 siblings, 0 replies; 28+ messages in thread
From: Ming Lei @ 2023-03-24 13:58 UTC (permalink / raw)
  To: Jens Axboe, io-uring, linux-block
  Cc: linux-kernel, Miklos Szeredi, ZiyangZhang, Xiaoguang Wang,
	Bernd Schubert, Pavel Begunkov, Stefan Hajnoczi, Ming Lei

Add two helpers for checking if map/unmap is needed, since we may have
passthrough request which needs map or unmap in future, such as for
supporting report zones.

Meantime don't mark ublk_copy_user_pages as inline since this function
is a bit fat now.

Reviewed-by: Ziyang Zhang <[email protected]>
Signed-off-by: Ming Lei <[email protected]>
---
 drivers/block/ublk_drv.c | 19 ++++++++++++++-----
 1 file changed, 14 insertions(+), 5 deletions(-)

diff --git a/drivers/block/ublk_drv.c b/drivers/block/ublk_drv.c
index 4fe324da97a0..43c0b1247924 100644
--- a/drivers/block/ublk_drv.c
+++ b/drivers/block/ublk_drv.c
@@ -488,8 +488,7 @@ static inline unsigned ublk_copy_io_pages(struct ublk_io_iter *data,
 	return done;
 }
 
-static inline int ublk_copy_user_pages(struct ublk_map_data *data,
-		bool to_vm)
+static int ublk_copy_user_pages(struct ublk_map_data *data, bool to_vm)
 {
 	const unsigned int gup_flags = to_vm ? FOLL_WRITE : 0;
 	const unsigned long start_vm = data->io->addr;
@@ -525,6 +524,16 @@ static inline int ublk_copy_user_pages(struct ublk_map_data *data,
 	return done;
 }
 
+static inline bool ublk_need_map_req(const struct request *req)
+{
+	return ublk_rq_has_data(req) && req_op(req) == REQ_OP_WRITE;
+}
+
+static inline bool ublk_need_unmap_req(const struct request *req)
+{
+	return ublk_rq_has_data(req) && req_op(req) == REQ_OP_READ;
+}
+
 static int ublk_map_io(const struct ublk_queue *ubq, const struct request *req,
 		struct ublk_io *io)
 {
@@ -535,7 +544,7 @@ static int ublk_map_io(const struct ublk_queue *ubq, const struct request *req,
 	 * context and the big benefit is that pinning pages in current
 	 * context is pretty fast, see ublk_pin_user_pages
 	 */
-	if (ublk_rq_has_data(req) && req_op(req) == REQ_OP_WRITE) {
+	if (ublk_need_map_req(req)) {
 		struct ublk_map_data data = {
 			.ubq	=	ubq,
 			.rq	=	req,
@@ -556,7 +565,7 @@ static int ublk_unmap_io(const struct ublk_queue *ubq,
 {
 	const unsigned int rq_bytes = blk_rq_bytes(req);
 
-	if (req_op(req) == REQ_OP_READ && ublk_rq_has_data(req)) {
+	if (ublk_need_unmap_req(req)) {
 		struct ublk_map_data data = {
 			.ubq	=	ubq,
 			.rq	=	req,
@@ -770,7 +779,7 @@ static inline void __ublk_rq_task_work(struct request *req)
 		return;
 	}
 
-	if (ublk_need_get_data(ubq) && (req_op(req) == REQ_OP_WRITE)) {
+	if (ublk_need_get_data(ubq) && ublk_need_map_req(req)) {
 		/*
 		 * We have not handled UBLK_IO_NEED_GET_DATA command yet,
 		 * so immepdately pass UBLK_IO_RES_NEED_GET_DATA to ublksrv
-- 
2.39.2


^ permalink raw reply related	[flat|nested] 28+ messages in thread

* [PATCH V4 10/17] block: ublk_drv: clean up several helpers
  2023-03-24 13:57 ` [PATCH V4 00/17] io_uring/ublk: add IORING_OP_FUSED_CMD Ming Lei
                     ` (8 preceding siblings ...)
  2023-03-24 13:58   ` [PATCH V4 09/17] block: ublk_drv: add two helpers to clean up map/unmap request Ming Lei
@ 2023-03-24 13:58   ` Ming Lei
  2023-03-24 13:58   ` [PATCH V4 11/17] block: ublk_drv: cleanup 'struct ublk_map_data' Ming Lei
                     ` (8 subsequent siblings)
  18 siblings, 0 replies; 28+ messages in thread
From: Ming Lei @ 2023-03-24 13:58 UTC (permalink / raw)
  To: Jens Axboe, io-uring, linux-block
  Cc: linux-kernel, Miklos Szeredi, ZiyangZhang, Xiaoguang Wang,
	Bernd Schubert, Pavel Begunkov, Stefan Hajnoczi, Ming Lei

Convert the following pattern in several helpers
	if (Z)
		return true
	return false
into:
	return Z;

Reviewed-by: Ziyang Zhang <[email protected]>
Signed-off-by: Ming Lei <[email protected]>
---
 drivers/block/ublk_drv.c | 18 +++++-------------
 1 file changed, 5 insertions(+), 13 deletions(-)

diff --git a/drivers/block/ublk_drv.c b/drivers/block/ublk_drv.c
index 43c0b1247924..c35922f9a066 100644
--- a/drivers/block/ublk_drv.c
+++ b/drivers/block/ublk_drv.c
@@ -298,9 +298,7 @@ static inline bool ublk_can_use_task_work(const struct ublk_queue *ubq)
 
 static inline bool ublk_need_get_data(const struct ublk_queue *ubq)
 {
-	if (ubq->flags & UBLK_F_NEED_GET_DATA)
-		return true;
-	return false;
+	return ubq->flags & UBLK_F_NEED_GET_DATA;
 }
 
 static struct ublk_device *ublk_get_device(struct ublk_device *ub)
@@ -349,25 +347,19 @@ static inline int ublk_queue_cmd_buf_size(struct ublk_device *ub, int q_id)
 static inline bool ublk_queue_can_use_recovery_reissue(
 		struct ublk_queue *ubq)
 {
-	if ((ubq->flags & UBLK_F_USER_RECOVERY) &&
-			(ubq->flags & UBLK_F_USER_RECOVERY_REISSUE))
-		return true;
-	return false;
+	return (ubq->flags & UBLK_F_USER_RECOVERY) &&
+			(ubq->flags & UBLK_F_USER_RECOVERY_REISSUE);
 }
 
 static inline bool ublk_queue_can_use_recovery(
 		struct ublk_queue *ubq)
 {
-	if (ubq->flags & UBLK_F_USER_RECOVERY)
-		return true;
-	return false;
+	return ubq->flags & UBLK_F_USER_RECOVERY;
 }
 
 static inline bool ublk_can_use_recovery(struct ublk_device *ub)
 {
-	if (ub->dev_info.flags & UBLK_F_USER_RECOVERY)
-		return true;
-	return false;
+	return ub->dev_info.flags & UBLK_F_USER_RECOVERY;
 }
 
 static void ublk_free_disk(struct gendisk *disk)
-- 
2.39.2


^ permalink raw reply related	[flat|nested] 28+ messages in thread

* [PATCH V4 11/17] block: ublk_drv: cleanup 'struct ublk_map_data'
  2023-03-24 13:57 ` [PATCH V4 00/17] io_uring/ublk: add IORING_OP_FUSED_CMD Ming Lei
                     ` (9 preceding siblings ...)
  2023-03-24 13:58   ` [PATCH V4 10/17] block: ublk_drv: clean up several helpers Ming Lei
@ 2023-03-24 13:58   ` Ming Lei
  2023-03-24 13:58   ` [PATCH V4 12/17] block: ublk_drv: cleanup ublk_copy_user_pages Ming Lei
                     ` (7 subsequent siblings)
  18 siblings, 0 replies; 28+ messages in thread
From: Ming Lei @ 2023-03-24 13:58 UTC (permalink / raw)
  To: Jens Axboe, io-uring, linux-block
  Cc: linux-kernel, Miklos Szeredi, ZiyangZhang, Xiaoguang Wang,
	Bernd Schubert, Pavel Begunkov, Stefan Hajnoczi, Ming Lei

'struct ublk_map_data' is passed to ublk_copy_user_pages()
for copying data between userspace buffer and request pages.

Here what matters is userspace buffer address/len and 'struct request',
so replace ->io field with user buffer address, and rename max_bytes
as len.

Meantime remove 'ubq' field from ublk_map_data, since it isn't used
any more.

Then code becomes more readable.

Reviewed-by: Ziyang Zhang <[email protected]>
Signed-off-by: Ming Lei <[email protected]>
---
 drivers/block/ublk_drv.c | 27 ++++++++++++---------------
 1 file changed, 12 insertions(+), 15 deletions(-)

diff --git a/drivers/block/ublk_drv.c b/drivers/block/ublk_drv.c
index c35922f9a066..0e7533858c1f 100644
--- a/drivers/block/ublk_drv.c
+++ b/drivers/block/ublk_drv.c
@@ -420,10 +420,9 @@ static const struct block_device_operations ub_fops = {
 #define UBLK_MAX_PIN_PAGES	32
 
 struct ublk_map_data {
-	const struct ublk_queue *ubq;
 	const struct request *rq;
-	const struct ublk_io *io;
-	unsigned max_bytes;
+	unsigned long	ubuf;
+	unsigned int	len;
 };
 
 struct ublk_io_iter {
@@ -483,14 +482,14 @@ static inline unsigned ublk_copy_io_pages(struct ublk_io_iter *data,
 static int ublk_copy_user_pages(struct ublk_map_data *data, bool to_vm)
 {
 	const unsigned int gup_flags = to_vm ? FOLL_WRITE : 0;
-	const unsigned long start_vm = data->io->addr;
+	const unsigned long start_vm = data->ubuf;
 	unsigned int done = 0;
 	struct ublk_io_iter iter = {
 		.pg_off	= start_vm & (PAGE_SIZE - 1),
 		.bio	= data->rq->bio,
 		.iter	= data->rq->bio->bi_iter,
 	};
-	const unsigned int nr_pages = round_up(data->max_bytes +
+	const unsigned int nr_pages = round_up(data->len +
 			(start_vm & (PAGE_SIZE - 1)), PAGE_SIZE) >> PAGE_SHIFT;
 
 	while (done < nr_pages) {
@@ -503,13 +502,13 @@ static int ublk_copy_user_pages(struct ublk_map_data *data, bool to_vm)
 				iter.pages);
 		if (iter.nr_pages <= 0)
 			return done == 0 ? iter.nr_pages : done;
-		len = ublk_copy_io_pages(&iter, data->max_bytes, to_vm);
+		len = ublk_copy_io_pages(&iter, data->len, to_vm);
 		for (i = 0; i < iter.nr_pages; i++) {
 			if (to_vm)
 				set_page_dirty(iter.pages[i]);
 			put_page(iter.pages[i]);
 		}
-		data->max_bytes -= len;
+		data->len -= len;
 		done += iter.nr_pages;
 	}
 
@@ -538,15 +537,14 @@ static int ublk_map_io(const struct ublk_queue *ubq, const struct request *req,
 	 */
 	if (ublk_need_map_req(req)) {
 		struct ublk_map_data data = {
-			.ubq	=	ubq,
 			.rq	=	req,
-			.io	=	io,
-			.max_bytes =	rq_bytes,
+			.ubuf	=	io->addr,
+			.len	=	rq_bytes,
 		};
 
 		ublk_copy_user_pages(&data, true);
 
-		return rq_bytes - data.max_bytes;
+		return rq_bytes - data.len;
 	}
 	return rq_bytes;
 }
@@ -559,17 +557,16 @@ static int ublk_unmap_io(const struct ublk_queue *ubq,
 
 	if (ublk_need_unmap_req(req)) {
 		struct ublk_map_data data = {
-			.ubq	=	ubq,
 			.rq	=	req,
-			.io	=	io,
-			.max_bytes =	io->res,
+			.ubuf	=	io->addr,
+			.len	=	io->res,
 		};
 
 		WARN_ON_ONCE(io->res > rq_bytes);
 
 		ublk_copy_user_pages(&data, false);
 
-		return io->res - data.max_bytes;
+		return io->res - data.len;
 	}
 	return rq_bytes;
 }
-- 
2.39.2


^ permalink raw reply related	[flat|nested] 28+ messages in thread

* [PATCH V4 12/17] block: ublk_drv: cleanup ublk_copy_user_pages
  2023-03-24 13:57 ` [PATCH V4 00/17] io_uring/ublk: add IORING_OP_FUSED_CMD Ming Lei
                     ` (10 preceding siblings ...)
  2023-03-24 13:58   ` [PATCH V4 11/17] block: ublk_drv: cleanup 'struct ublk_map_data' Ming Lei
@ 2023-03-24 13:58   ` Ming Lei
  2023-03-24 13:58   ` [PATCH V4 13/17] block: ublk_drv: grab request reference when the request is handled by userspace Ming Lei
                     ` (6 subsequent siblings)
  18 siblings, 0 replies; 28+ messages in thread
From: Ming Lei @ 2023-03-24 13:58 UTC (permalink / raw)
  To: Jens Axboe, io-uring, linux-block
  Cc: linux-kernel, Miklos Szeredi, ZiyangZhang, Xiaoguang Wang,
	Bernd Schubert, Pavel Begunkov, Stefan Hajnoczi, Ming Lei

Clean up ublk_copy_user_pages() by using iov iter, and code
gets simplified a lot and becomes much more readable than before.

Signed-off-by: Ming Lei <[email protected]>
---
 drivers/block/ublk_drv.c | 112 +++++++++++++++++----------------------
 1 file changed, 49 insertions(+), 63 deletions(-)

diff --git a/drivers/block/ublk_drv.c b/drivers/block/ublk_drv.c
index 0e7533858c1f..85ceb8c09d0e 100644
--- a/drivers/block/ublk_drv.c
+++ b/drivers/block/ublk_drv.c
@@ -419,49 +419,39 @@ static const struct block_device_operations ub_fops = {
 
 #define UBLK_MAX_PIN_PAGES	32
 
-struct ublk_map_data {
-	const struct request *rq;
-	unsigned long	ubuf;
-	unsigned int	len;
-};
-
 struct ublk_io_iter {
 	struct page *pages[UBLK_MAX_PIN_PAGES];
-	unsigned pg_off;	/* offset in the 1st page in pages */
-	int nr_pages;		/* how many page pointers in pages */
 	struct bio *bio;
 	struct bvec_iter iter;
 };
 
-static inline unsigned ublk_copy_io_pages(struct ublk_io_iter *data,
-		unsigned max_bytes, bool to_vm)
+/* return how many pages are copied */
+static void ublk_copy_io_pages(struct ublk_io_iter *data,
+		size_t total, size_t pg_off, int dir)
 {
-	const unsigned total = min_t(unsigned, max_bytes,
-			PAGE_SIZE - data->pg_off +
-			((data->nr_pages - 1) << PAGE_SHIFT));
 	unsigned done = 0;
 	unsigned pg_idx = 0;
 
 	while (done < total) {
 		struct bio_vec bv = bio_iter_iovec(data->bio, data->iter);
-		const unsigned int bytes = min3(bv.bv_len, total - done,
-				(unsigned)(PAGE_SIZE - data->pg_off));
+		unsigned int bytes = min3(bv.bv_len, (unsigned)total - done,
+				(unsigned)(PAGE_SIZE - pg_off));
 		void *bv_buf = bvec_kmap_local(&bv);
 		void *pg_buf = kmap_local_page(data->pages[pg_idx]);
 
-		if (to_vm)
-			memcpy(pg_buf + data->pg_off, bv_buf, bytes);
+		if (dir == ITER_DEST)
+			memcpy(pg_buf + pg_off, bv_buf, bytes);
 		else
-			memcpy(bv_buf, pg_buf + data->pg_off, bytes);
+			memcpy(bv_buf, pg_buf + pg_off, bytes);
 
 		kunmap_local(pg_buf);
 		kunmap_local(bv_buf);
 
 		/* advance page array */
-		data->pg_off += bytes;
-		if (data->pg_off == PAGE_SIZE) {
+		pg_off += bytes;
+		if (pg_off == PAGE_SIZE) {
 			pg_idx += 1;
-			data->pg_off = 0;
+			pg_off = 0;
 		}
 
 		done += bytes;
@@ -475,41 +465,40 @@ static inline unsigned ublk_copy_io_pages(struct ublk_io_iter *data,
 			data->iter = data->bio->bi_iter;
 		}
 	}
-
-	return done;
 }
 
-static int ublk_copy_user_pages(struct ublk_map_data *data, bool to_vm)
+/*
+ * Copy data between request pages and io_iter, and 'offset'
+ * is the start point of linear offset of request.
+ */
+static size_t ublk_copy_user_pages(const struct request *req,
+		struct iov_iter *uiter, int dir)
 {
-	const unsigned int gup_flags = to_vm ? FOLL_WRITE : 0;
-	const unsigned long start_vm = data->ubuf;
-	unsigned int done = 0;
 	struct ublk_io_iter iter = {
-		.pg_off	= start_vm & (PAGE_SIZE - 1),
-		.bio	= data->rq->bio,
-		.iter	= data->rq->bio->bi_iter,
+		.bio	= req->bio,
+		.iter	= req->bio->bi_iter,
 	};
-	const unsigned int nr_pages = round_up(data->len +
-			(start_vm & (PAGE_SIZE - 1)), PAGE_SIZE) >> PAGE_SHIFT;
-
-	while (done < nr_pages) {
-		const unsigned to_pin = min_t(unsigned, UBLK_MAX_PIN_PAGES,
-				nr_pages - done);
-		unsigned i, len;
-
-		iter.nr_pages = get_user_pages_fast(start_vm +
-				(done << PAGE_SHIFT), to_pin, gup_flags,
-				iter.pages);
-		if (iter.nr_pages <= 0)
-			return done == 0 ? iter.nr_pages : done;
-		len = ublk_copy_io_pages(&iter, data->len, to_vm);
-		for (i = 0; i < iter.nr_pages; i++) {
-			if (to_vm)
+	size_t done = 0;
+
+	while (iov_iter_count(uiter) && iter.bio) {
+		unsigned nr_pages;
+		size_t len, off;
+		int i;
+
+		len = iov_iter_get_pages2(uiter, iter.pages,
+				iov_iter_count(uiter),
+				UBLK_MAX_PIN_PAGES, &off);
+		if (len <= 0)
+			return done;
+
+		ublk_copy_io_pages(&iter, len, off, dir);
+		nr_pages = DIV_ROUND_UP(len + off, PAGE_SIZE);
+		for (i = 0; i < nr_pages; i++) {
+			if (dir == ITER_DEST)
 				set_page_dirty(iter.pages[i]);
 			put_page(iter.pages[i]);
 		}
-		data->len -= len;
-		done += iter.nr_pages;
+		done += len;
 	}
 
 	return done;
@@ -536,15 +525,14 @@ static int ublk_map_io(const struct ublk_queue *ubq, const struct request *req,
 	 * context is pretty fast, see ublk_pin_user_pages
 	 */
 	if (ublk_need_map_req(req)) {
-		struct ublk_map_data data = {
-			.rq	=	req,
-			.ubuf	=	io->addr,
-			.len	=	rq_bytes,
-		};
+		struct iov_iter iter;
+		struct iovec iov;
+		const int dir = ITER_DEST;
 
-		ublk_copy_user_pages(&data, true);
+		import_single_range(dir, u64_to_user_ptr(io->addr), rq_bytes,
+				&iov, &iter);
 
-		return rq_bytes - data.len;
+		return ublk_copy_user_pages(req, &iter, dir);
 	}
 	return rq_bytes;
 }
@@ -556,17 +544,15 @@ static int ublk_unmap_io(const struct ublk_queue *ubq,
 	const unsigned int rq_bytes = blk_rq_bytes(req);
 
 	if (ublk_need_unmap_req(req)) {
-		struct ublk_map_data data = {
-			.rq	=	req,
-			.ubuf	=	io->addr,
-			.len	=	io->res,
-		};
+		struct iov_iter iter;
+		struct iovec iov;
+		const int dir = ITER_SOURCE;
 
 		WARN_ON_ONCE(io->res > rq_bytes);
 
-		ublk_copy_user_pages(&data, false);
-
-		return io->res - data.len;
+		import_single_range(dir, u64_to_user_ptr(io->addr), io->res,
+				&iov, &iter);
+		return ublk_copy_user_pages(req, &iter, dir);
 	}
 	return rq_bytes;
 }
-- 
2.39.2


^ permalink raw reply related	[flat|nested] 28+ messages in thread

* [PATCH V4 13/17] block: ublk_drv: grab request reference when the request is handled by userspace
  2023-03-24 13:57 ` [PATCH V4 00/17] io_uring/ublk: add IORING_OP_FUSED_CMD Ming Lei
                     ` (11 preceding siblings ...)
  2023-03-24 13:58   ` [PATCH V4 12/17] block: ublk_drv: cleanup ublk_copy_user_pages Ming Lei
@ 2023-03-24 13:58   ` Ming Lei
  2023-03-24 13:58   ` [PATCH V4 14/17] block: ublk_drv: support to copy any part of request pages Ming Lei
                     ` (5 subsequent siblings)
  18 siblings, 0 replies; 28+ messages in thread
From: Ming Lei @ 2023-03-24 13:58 UTC (permalink / raw)
  To: Jens Axboe, io-uring, linux-block
  Cc: linux-kernel, Miklos Szeredi, ZiyangZhang, Xiaoguang Wang,
	Bernd Schubert, Pavel Begunkov, Stefan Hajnoczi, Ming Lei

Add one reference counter into request pdu data, and hold this reference
in the request's lifetime. This way is always safe. In theory, the ublk
request won't be completed until fused commands are done. However, it
is userspace, and application can submit fused command at will.

Prepare for supporting zero copy, which needs to retrieve request buffer
by fused command, so we have to guarantee:

- the fused command can't succeed unless the request isn't queued

- when any fused command is successful, this request can't be freed
until all fused commands on this request are done.

Signed-off-by: Ming Lei <[email protected]>
---
 drivers/block/ublk_drv.c | 67 ++++++++++++++++++++++++++++++++++++++--
 1 file changed, 64 insertions(+), 3 deletions(-)

diff --git a/drivers/block/ublk_drv.c b/drivers/block/ublk_drv.c
index 85ceb8c09d0e..88d5a657834d 100644
--- a/drivers/block/ublk_drv.c
+++ b/drivers/block/ublk_drv.c
@@ -43,6 +43,7 @@
 #include <asm/page.h>
 #include <linux/task_work.h>
 #include <linux/namei.h>
+#include <linux/kref.h>
 #include <uapi/linux/ublk_cmd.h>
 
 #define UBLK_MINORS		(1U << MINORBITS)
@@ -62,6 +63,17 @@
 struct ublk_rq_data {
 	struct llist_node node;
 	struct callback_head work;
+
+	/*
+	 * Only for applying fused command to support zero copy:
+	 *
+	 * - if there is any fused command aiming at this request, not complete
+	 *   request until all fused commands are done
+	 *
+	 * - fused command has to fail unless this reference is grabbed
+	 *   successfully
+	 */
+	struct kref ref;
 };
 
 struct ublk_uring_cmd_pdu {
@@ -180,6 +192,9 @@ struct ublk_params_header {
 	__u32	types;
 };
 
+static inline void __ublk_complete_rq(struct request *req);
+static void ublk_complete_rq(struct kref *ref);
+
 static dev_t ublk_chr_devt;
 static struct class *ublk_chr_class;
 
@@ -288,6 +303,35 @@ static int ublk_apply_params(struct ublk_device *ub)
 	return 0;
 }
 
+static inline bool ublk_support_zc(const struct ublk_queue *ubq)
+{
+	return ubq->flags & UBLK_F_SUPPORT_ZERO_COPY;
+}
+
+static inline bool ublk_get_req_ref(const struct ublk_queue *ubq,
+		struct request *req)
+{
+	if (ublk_support_zc(ubq)) {
+		struct ublk_rq_data *data = blk_mq_rq_to_pdu(req);
+
+		return kref_get_unless_zero(&data->ref);
+	}
+
+	return true;
+}
+
+static inline void ublk_put_req_ref(const struct ublk_queue *ubq,
+		struct request *req)
+{
+	if (ublk_support_zc(ubq)) {
+		struct ublk_rq_data *data = blk_mq_rq_to_pdu(req);
+
+		kref_put(&data->ref, ublk_complete_rq);
+	} else {
+		__ublk_complete_rq(req);
+	}
+}
+
 static inline bool ublk_can_use_task_work(const struct ublk_queue *ubq)
 {
 	if (IS_BUILTIN(CONFIG_BLK_DEV_UBLK) &&
@@ -632,13 +676,19 @@ static inline bool ubq_daemon_is_dying(struct ublk_queue *ubq)
 }
 
 /* todo: handle partial completion */
-static void ublk_complete_rq(struct request *req)
+static inline void __ublk_complete_rq(struct request *req)
 {
 	struct ublk_queue *ubq = req->mq_hctx->driver_data;
 	struct ublk_io *io = &ubq->ios[req->tag];
 	unsigned int unmapped_bytes;
 	blk_status_t res = BLK_STS_OK;
 
+	/* called from ublk_abort_queue() code path */
+	if (io->flags & UBLK_IO_FLAG_ABORTED) {
+		res = BLK_STS_IOERR;
+		goto exit;
+	}
+
 	/* failed read IO if nothing is read */
 	if (!io->res && req_op(req) == REQ_OP_READ)
 		io->res = -EIO;
@@ -678,6 +728,15 @@ static void ublk_complete_rq(struct request *req)
 	blk_mq_end_request(req, res);
 }
 
+static void ublk_complete_rq(struct kref *ref)
+{
+	struct ublk_rq_data *data = container_of(ref, struct ublk_rq_data,
+			ref);
+	struct request *req = blk_mq_rq_from_pdu(data);
+
+	__ublk_complete_rq(req);
+}
+
 /*
  * Since __ublk_rq_task_work always fails requests immediately during
  * exiting, __ublk_fail_req() is only called from abort context during
@@ -696,7 +755,7 @@ static void __ublk_fail_req(struct ublk_queue *ubq, struct ublk_io *io,
 		if (ublk_queue_can_use_recovery_reissue(ubq))
 			blk_mq_requeue_request(req, false);
 		else
-			blk_mq_end_request(req, BLK_STS_IOERR);
+			ublk_put_req_ref(ubq, req);
 	}
 }
 
@@ -732,6 +791,7 @@ static inline void __ublk_abort_rq(struct ublk_queue *ubq,
 static inline void __ublk_rq_task_work(struct request *req)
 {
 	struct ublk_queue *ubq = req->mq_hctx->driver_data;
+	struct ublk_rq_data *data = blk_mq_rq_to_pdu(req);
 	int tag = req->tag;
 	struct ublk_io *io = &ubq->ios[tag];
 	unsigned int mapped_bytes;
@@ -803,6 +863,7 @@ static inline void __ublk_rq_task_work(struct request *req)
 			mapped_bytes >> 9;
 	}
 
+	kref_init(&data->ref);
 	ubq_complete_io_cmd(io, UBLK_IO_RES_OK);
 }
 
@@ -1013,7 +1074,7 @@ static void ublk_commit_completion(struct ublk_device *ub,
 	req = blk_mq_tag_to_rq(ub->tag_set.tags[qid], tag);
 
 	if (req && likely(!blk_should_fake_timeout(req->q)))
-		ublk_complete_rq(req);
+		ublk_put_req_ref(ubq, req);
 }
 
 /*
-- 
2.39.2


^ permalink raw reply related	[flat|nested] 28+ messages in thread

* [PATCH V4 14/17] block: ublk_drv: support to copy any part of request pages
  2023-03-24 13:57 ` [PATCH V4 00/17] io_uring/ublk: add IORING_OP_FUSED_CMD Ming Lei
                     ` (12 preceding siblings ...)
  2023-03-24 13:58   ` [PATCH V4 13/17] block: ublk_drv: grab request reference when the request is handled by userspace Ming Lei
@ 2023-03-24 13:58   ` Ming Lei
  2023-03-24 13:58   ` [PATCH V4 15/17] block: ublk_drv: add read()/write() support for ublk char device Ming Lei
                     ` (4 subsequent siblings)
  18 siblings, 0 replies; 28+ messages in thread
From: Ming Lei @ 2023-03-24 13:58 UTC (permalink / raw)
  To: Jens Axboe, io-uring, linux-block
  Cc: linux-kernel, Miklos Szeredi, ZiyangZhang, Xiaoguang Wang,
	Bernd Schubert, Pavel Begunkov, Stefan Hajnoczi, Ming Lei

Add 'offset' to 'struct ublk_map_data', so that ublk_copy_user_pages()
can be used to copy any sub-buffer(linear mapped) of the request.

Signed-off-by: Ming Lei <[email protected]>
---
 drivers/block/ublk_drv.c | 31 ++++++++++++++++++++++++-------
 1 file changed, 24 insertions(+), 7 deletions(-)

diff --git a/drivers/block/ublk_drv.c b/drivers/block/ublk_drv.c
index 88d5a657834d..26a14c54da1d 100644
--- a/drivers/block/ublk_drv.c
+++ b/drivers/block/ublk_drv.c
@@ -511,19 +511,36 @@ static void ublk_copy_io_pages(struct ublk_io_iter *data,
 	}
 }
 
+static bool ublk_advance_io_iter(const struct request *req,
+		struct ublk_io_iter *iter, unsigned int offset)
+{
+	struct bio *bio = req->bio;
+
+	for_each_bio(bio) {
+		if (bio->bi_iter.bi_size > offset) {
+			iter->bio = bio;
+			iter->iter = bio->bi_iter;
+			bio_advance_iter(iter->bio, &iter->iter, offset);
+			return true;
+		}
+		offset -= bio->bi_iter.bi_size;
+	}
+	return false;
+}
+
 /*
  * Copy data between request pages and io_iter, and 'offset'
  * is the start point of linear offset of request.
  */
 static size_t ublk_copy_user_pages(const struct request *req,
-		struct iov_iter *uiter, int dir)
+		unsigned offset, struct iov_iter *uiter, int dir)
 {
-	struct ublk_io_iter iter = {
-		.bio	= req->bio,
-		.iter	= req->bio->bi_iter,
-	};
+	struct ublk_io_iter iter;
 	size_t done = 0;
 
+	if (!ublk_advance_io_iter(req, &iter, offset))
+		return 0;
+
 	while (iov_iter_count(uiter) && iter.bio) {
 		unsigned nr_pages;
 		size_t len, off;
@@ -576,7 +593,7 @@ static int ublk_map_io(const struct ublk_queue *ubq, const struct request *req,
 		import_single_range(dir, u64_to_user_ptr(io->addr), rq_bytes,
 				&iov, &iter);
 
-		return ublk_copy_user_pages(req, &iter, dir);
+		return ublk_copy_user_pages(req, 0, &iter, dir);
 	}
 	return rq_bytes;
 }
@@ -596,7 +613,7 @@ static int ublk_unmap_io(const struct ublk_queue *ubq,
 
 		import_single_range(dir, u64_to_user_ptr(io->addr), io->res,
 				&iov, &iter);
-		return ublk_copy_user_pages(req, &iter, dir);
+		return ublk_copy_user_pages(req, 0, &iter, dir);
 	}
 	return rq_bytes;
 }
-- 
2.39.2


^ permalink raw reply related	[flat|nested] 28+ messages in thread

* [PATCH V4 15/17] block: ublk_drv: add read()/write() support for ublk char device
  2023-03-24 13:57 ` [PATCH V4 00/17] io_uring/ublk: add IORING_OP_FUSED_CMD Ming Lei
                     ` (13 preceding siblings ...)
  2023-03-24 13:58   ` [PATCH V4 14/17] block: ublk_drv: support to copy any part of request pages Ming Lei
@ 2023-03-24 13:58   ` Ming Lei
  2023-03-24 13:58   ` [PATCH V4 16/17] block: ublk_drv: don't check buffer in case of zero copy Ming Lei
                     ` (3 subsequent siblings)
  18 siblings, 0 replies; 28+ messages in thread
From: Ming Lei @ 2023-03-24 13:58 UTC (permalink / raw)
  To: Jens Axboe, io-uring, linux-block
  Cc: linux-kernel, Miklos Szeredi, ZiyangZhang, Xiaoguang Wang,
	Bernd Schubert, Pavel Begunkov, Stefan Hajnoczi, Ming Lei

We are going to support zero copy by fused uring command, the userspace
can't read from or write to the io buffer any more, it becomes not
flexible for applications:

1) some targets need to zero buffer explicitly, such as when reading
unmapped qcow2 cluster

2) some targets need to support passthrough command, such as zoned
report zones, and still need to read/write the io buffer

Support pread()/pwrite() on ublk char device for reading/writing request
io buffer, so ublk server can handle the above cases easily.

This also can help to make zero copy becoming the primary option, and
non-zero-copy will become legacy code path since the added read()/write()
can cover non-zero-copy feature.

Signed-off-by: Ming Lei <[email protected]>
---
 drivers/block/ublk_drv.c      | 131 ++++++++++++++++++++++++++++++++++
 include/uapi/linux/ublk_cmd.h |  31 +++++++-
 2 files changed, 161 insertions(+), 1 deletion(-)

diff --git a/drivers/block/ublk_drv.c b/drivers/block/ublk_drv.c
index 26a14c54da1d..e6b528750b3c 100644
--- a/drivers/block/ublk_drv.c
+++ b/drivers/block/ublk_drv.c
@@ -1317,6 +1317,36 @@ static void ublk_handle_need_get_data(struct ublk_device *ub, int q_id,
 	ublk_queue_cmd(ubq, req);
 }
 
+static inline struct request *__ublk_check_and_get_req(struct ublk_device *ub,
+		struct ublk_queue *ubq, int tag, size_t offset)
+{
+	struct request *req;
+
+	if (!ublk_support_zc(ubq))
+		return NULL;
+
+	req = blk_mq_tag_to_rq(ub->tag_set.tags[ubq->q_id], tag);
+	if (!req)
+		return NULL;
+
+	if (!ublk_get_req_ref(ubq, req))
+		return NULL;
+
+	if (unlikely(!blk_mq_request_started(req) || req->tag != tag))
+		goto fail_put;
+
+	if (!ublk_rq_has_data(req))
+		goto fail_put;
+
+	if (offset > blk_rq_bytes(req))
+		goto fail_put;
+
+	return req;
+fail_put:
+	ublk_put_req_ref(ubq, req);
+	return NULL;
+}
+
 static int ublk_ch_uring_cmd(struct io_uring_cmd *cmd, unsigned int issue_flags)
 {
 	struct ublksrv_io_cmd *ub_cmd = (struct ublksrv_io_cmd *)cmd->cmd;
@@ -1418,11 +1448,112 @@ static int ublk_ch_uring_cmd(struct io_uring_cmd *cmd, unsigned int issue_flags)
 	return -EIOCBQUEUED;
 }
 
+static inline bool ublk_check_ubuf_dir(const struct request *req,
+		int ubuf_dir)
+{
+	/* copy ubuf to request pages */
+	if (req_op(req) == REQ_OP_READ && ubuf_dir == ITER_SOURCE)
+		return true;
+
+	/* copy request pages to ubuf */
+	if (req_op(req) == REQ_OP_WRITE && ubuf_dir == ITER_DEST)
+		return true;
+
+	return false;
+}
+
+static struct request *ublk_check_and_get_req(struct kiocb *iocb,
+		struct iov_iter *iter, size_t *off, int dir)
+{
+	struct ublk_device *ub = iocb->ki_filp->private_data;
+	struct ublk_queue *ubq;
+	struct request *req;
+	size_t buf_off;
+	u16 tag, q_id;
+
+	if (!ub)
+		return ERR_PTR(-EACCES);
+
+	if (!user_backed_iter(iter))
+		return ERR_PTR(-EACCES);
+
+	if (ub->dev_info.state == UBLK_S_DEV_DEAD)
+		return ERR_PTR(-EACCES);
+
+	tag = ublk_pos_to_tag(iocb->ki_pos);
+	q_id = ublk_pos_to_hwq(iocb->ki_pos);
+	buf_off = ublk_pos_to_buf_offset(iocb->ki_pos);
+
+	if (q_id >= ub->dev_info.nr_hw_queues)
+		return ERR_PTR(-EINVAL);
+
+	ubq = ublk_get_queue(ub, q_id);
+	if (!ubq)
+		return ERR_PTR(-EINVAL);
+
+	if (tag >= ubq->q_depth)
+		return ERR_PTR(-EINVAL);
+
+	req = __ublk_check_and_get_req(ub, ubq, tag, buf_off);
+	if (!req)
+		return ERR_PTR(-EINVAL);
+
+	if (!req->mq_hctx || !req->mq_hctx->driver_data)
+		goto fail;
+
+	if (!ublk_check_ubuf_dir(req, dir))
+		goto fail;
+
+	*off = buf_off;
+	return req;
+fail:
+	ublk_put_req_ref(ubq, req);
+	return ERR_PTR(-EACCES);
+}
+
+static ssize_t ublk_ch_read_iter(struct kiocb *iocb, struct iov_iter *to)
+{
+	struct ublk_queue *ubq;
+	struct request *req;
+	size_t buf_off;
+	size_t ret;
+
+	req = ublk_check_and_get_req(iocb, to, &buf_off, ITER_DEST);
+	if (unlikely(IS_ERR(req)))
+		return PTR_ERR(req);
+
+	ret = ublk_copy_user_pages(req, buf_off, to, ITER_DEST);
+	ubq = req->mq_hctx->driver_data;
+	ublk_put_req_ref(ubq, req);
+
+	return ret;
+}
+
+static ssize_t ublk_ch_write_iter(struct kiocb *iocb, struct iov_iter *from)
+{
+	struct ublk_queue *ubq;
+	struct request *req;
+	size_t buf_off;
+	size_t ret;
+
+	req = ublk_check_and_get_req(iocb, from, &buf_off, ITER_SOURCE);
+	if (unlikely(IS_ERR(req)))
+		return PTR_ERR(req);
+
+	ret = ublk_copy_user_pages(req, buf_off, from, ITER_SOURCE);
+	ubq = req->mq_hctx->driver_data;
+	ublk_put_req_ref(ubq, req);
+
+	return ret;
+}
+
 static const struct file_operations ublk_ch_fops = {
 	.owner = THIS_MODULE,
 	.open = ublk_ch_open,
 	.release = ublk_ch_release,
 	.llseek = no_llseek,
+	.read_iter = ublk_ch_read_iter,
+	.write_iter = ublk_ch_write_iter,
 	.uring_cmd = ublk_ch_uring_cmd,
 	.mmap = ublk_ch_mmap,
 };
diff --git a/include/uapi/linux/ublk_cmd.h b/include/uapi/linux/ublk_cmd.h
index f6238ccc7800..d1a6b3dc0327 100644
--- a/include/uapi/linux/ublk_cmd.h
+++ b/include/uapi/linux/ublk_cmd.h
@@ -54,7 +54,36 @@
 #define UBLKSRV_IO_BUF_OFFSET	0x80000000
 
 /* tag bit is 12bit, so at most 4096 IOs for each queue */
-#define UBLK_MAX_QUEUE_DEPTH	4096
+#define UBLK_TAG_BITS		12
+#define UBLK_MAX_QUEUE_DEPTH	(1U << UBLK_TAG_BITS)
+
+/* used for locating each io buffer for pread()/pwrite() on char device */
+#define UBLK_BUFS_SIZE_BITS	42
+#define UBLK_BUFS_SIZE_MASK    ((1ULL << UBLK_BUFS_SIZE_BITS) - 1)
+#define UBLK_BUF_SIZE_BITS     (UBLK_BUFS_SIZE_BITS - UBLK_TAG_BITS)
+#define UBLK_BUF_MAX_SIZE      (1ULL << UBLK_BUF_SIZE_BITS)
+
+static inline __u16 ublk_pos_to_hwq(__u64 pos)
+{
+	return pos >> UBLK_BUFS_SIZE_BITS;
+}
+
+static inline __u32 ublk_pos_to_buf_offset(__u64 pos)
+{
+	return (pos & UBLK_BUFS_SIZE_MASK) & (UBLK_BUF_MAX_SIZE - 1);
+}
+
+static inline __u16 ublk_pos_to_tag(__u64 pos)
+{
+	return (pos & UBLK_BUFS_SIZE_MASK) >> UBLK_BUF_SIZE_BITS;
+}
+
+/* offset of single buffer, which has to be < UBLK_BUX_MAX_SIZE */
+static inline __u64 ublk_pos(__u16 q_id, __u16 tag, __u32 offset)
+{
+	return (((__u64)q_id) << UBLK_BUFS_SIZE_BITS) |
+		((((__u64)tag) << UBLK_BUF_SIZE_BITS) + offset);
+}
 
 /*
  * zero copy requires 4k block size, and can remap ublk driver's io
-- 
2.39.2


^ permalink raw reply related	[flat|nested] 28+ messages in thread

* [PATCH V4 16/17] block: ublk_drv: don't check buffer in case of zero copy
  2023-03-24 13:57 ` [PATCH V4 00/17] io_uring/ublk: add IORING_OP_FUSED_CMD Ming Lei
                     ` (14 preceding siblings ...)
  2023-03-24 13:58   ` [PATCH V4 15/17] block: ublk_drv: add read()/write() support for ublk char device Ming Lei
@ 2023-03-24 13:58   ` Ming Lei
  2023-03-24 13:58   ` [PATCH V4 17/17] block: ublk_drv: apply io_uring FUSED_CMD for supporting " Ming Lei
                     ` (2 subsequent siblings)
  18 siblings, 0 replies; 28+ messages in thread
From: Ming Lei @ 2023-03-24 13:58 UTC (permalink / raw)
  To: Jens Axboe, io-uring, linux-block
  Cc: linux-kernel, Miklos Szeredi, ZiyangZhang, Xiaoguang Wang,
	Bernd Schubert, Pavel Begunkov, Stefan Hajnoczi, Ming Lei

In case of zero copy, ublk server needn't to pre-allocate IO buffer
and provide it to driver more.

Meantime not set the buffer in case of zero copy any more, and the
userspace can use pread()/pwrite() to read from/write to the io request
buffer, which is easier & simpler from userspace viewpoint.

Signed-off-by: Ming Lei <[email protected]>
---
 drivers/block/ublk_drv.c | 23 ++++++++++++++---------
 1 file changed, 14 insertions(+), 9 deletions(-)

diff --git a/drivers/block/ublk_drv.c b/drivers/block/ublk_drv.c
index e6b528750b3c..979444647831 100644
--- a/drivers/block/ublk_drv.c
+++ b/drivers/block/ublk_drv.c
@@ -1405,25 +1405,30 @@ static int ublk_ch_uring_cmd(struct io_uring_cmd *cmd, unsigned int issue_flags)
 		if (io->flags & UBLK_IO_FLAG_OWNED_BY_SRV)
 			goto out;
 		/* FETCH_RQ has to provide IO buffer if NEED GET DATA is not enabled */
-		if (!ub_cmd->addr && !ublk_need_get_data(ubq))
-			goto out;
+		if (!ublk_support_zc(ubq)) {
+			if (!ub_cmd->addr && !ublk_need_get_data(ubq))
+				goto out;
+			io->addr = ub_cmd->addr;
+		}
 		io->cmd = cmd;
 		io->flags |= UBLK_IO_FLAG_ACTIVE;
-		io->addr = ub_cmd->addr;
-
 		ublk_mark_io_ready(ub, ubq);
 		break;
 	case UBLK_IO_COMMIT_AND_FETCH_REQ:
 		req = blk_mq_tag_to_rq(ub->tag_set.tags[ub_cmd->q_id], tag);
+
+		if (!(io->flags & UBLK_IO_FLAG_OWNED_BY_SRV))
+			goto out;
 		/*
 		 * COMMIT_AND_FETCH_REQ has to provide IO buffer if NEED GET DATA is
 		 * not enabled or it is Read IO.
 		 */
-		if (!ub_cmd->addr && (!ublk_need_get_data(ubq) || req_op(req) == REQ_OP_READ))
-			goto out;
-		if (!(io->flags & UBLK_IO_FLAG_OWNED_BY_SRV))
-			goto out;
-		io->addr = ub_cmd->addr;
+		if (!ublk_support_zc(ubq)) {
+			if (!ub_cmd->addr && (!ublk_need_get_data(ubq) ||
+						req_op(req) == REQ_OP_READ))
+				goto out;
+			io->addr = ub_cmd->addr;
+		}
 		io->flags |= UBLK_IO_FLAG_ACTIVE;
 		io->cmd = cmd;
 		ublk_commit_completion(ub, ub_cmd);
-- 
2.39.2


^ permalink raw reply related	[flat|nested] 28+ messages in thread

* [PATCH V4 17/17] block: ublk_drv: apply io_uring FUSED_CMD for supporting zero copy
  2023-03-24 13:57 ` [PATCH V4 00/17] io_uring/ublk: add IORING_OP_FUSED_CMD Ming Lei
                     ` (15 preceding siblings ...)
  2023-03-24 13:58   ` [PATCH V4 16/17] block: ublk_drv: don't check buffer in case of zero copy Ming Lei
@ 2023-03-24 13:58   ` Ming Lei
  2023-03-28  0:36   ` [PATCH V4 00/17] io_uring/ublk: add IORING_OP_FUSED_CMD Dan Williams
  2023-03-28  5:10   ` Kanchan Joshi
  18 siblings, 0 replies; 28+ messages in thread
From: Ming Lei @ 2023-03-24 13:58 UTC (permalink / raw)
  To: Jens Axboe, io-uring, linux-block
  Cc: linux-kernel, Miklos Szeredi, ZiyangZhang, Xiaoguang Wang,
	Bernd Schubert, Pavel Begunkov, Stefan Hajnoczi, Ming Lei

Apply io_uring fused command for supporting zero copy:

1) init the fused cmd buffer(io_mapped_buf) in ublk_map_io(), and deinit it
in ublk_unmap_io(), and this buffer is immutable, so it is just fine to
retrieve it from concurrent fused command.

1) add sub-command opcode of UBLK_IO_FUSED_SUBMIT_IO for retrieving this
fused cmd(zero copy) buffer

2) call io_fused_cmd_start_slave_req() to provide buffer to slave request and
submit slave request; meantime setup complete callback via this API, once slave
request is completed, the complete callback is called for freeing the buffer
and completing the fused command

Also request reference is held during fused command lifetime, and this way
guarantees that request buffer won't be freed until all inflight fused commands
are completed.

userspace(only implement sqe128 fused command):

	https://github.com/ming1/ubdsrv/tree/fused-cmd-zc-v2

liburing test(only implement normal sqe fused command: two 64byte SQEs)

	https://github.com/ming1/liburing/commits/fused_cmd_miniublk

Signed-off-by: Ming Lei <[email protected]>
---
 Documentation/block/ublk.rst  | 126 ++++++++++++++++++++--
 drivers/block/ublk_drv.c      | 191 ++++++++++++++++++++++++++++++++--
 include/uapi/linux/ublk_cmd.h |   6 +-
 3 files changed, 302 insertions(+), 21 deletions(-)

diff --git a/Documentation/block/ublk.rst b/Documentation/block/ublk.rst
index 1713b2890abb..d6b46455ca4d 100644
--- a/Documentation/block/ublk.rst
+++ b/Documentation/block/ublk.rst
@@ -297,18 +297,126 @@ with specified IO tag in the command data:
   ``UBLK_IO_COMMIT_AND_FETCH_REQ`` to the server, ublkdrv needs to copy
   the server buffer (pages) read to the IO request pages.
 
-Future development
-==================
+- ``UBLK_IO_FUSED_SUBMIT_IO``
+
+  Used for implementing zero copy feature.
+
+  It has to been the master command of io_uring fused command. This command
+  submits the generic slave IO request with io buffer provided by our master
+  command, and won't be completed until the slave request is done.
+
+  The provided buffer is represented as ``io_uring_bvec_buf``, which is
+  actually ublk request buffer's reference, and the reference is shared &
+  read-only, so the generic slave request can retrieve any part of the buffer
+  by passing buffer offset & length.
 
 Zero copy
----------
+=========
+
+What is zero copy?
+------------------
+
+When application submits IO to ``/dev/ublkb*``, userspace buffer(direct io)
+or page cache buffer(buffered io) or kernel buffer(meta io often) is used
+for submitting data to ublk driver, and all kinds of these buffers are
+represented by bio/bvecs(ublk request buffer) finally. Before supporting
+zero copy, data in these buffers has to be copied to ublk server userspace
+buffer before handling WRITE IO, or after handing READ IO, so that ublk
+server can handle IO for ``/dev/ublkb*`` with the copied data.
+
+The extra copy between ublk request buffer and ublk server userspace buffer
+not only increases CPU utilization(such as pinning pages, copy data), but
+also consumes memory bandwidth, and the cost could be very big when IO size
+is big. It is observed that ublk-null IOPS may be increased to ~5X if the
+extra copy can be avoided.
+
+So zero copy is very important for supporting high performance block device
+in userspace.
+
+Technical requirements
+----------------------
+
+- ublk request buffer use
+
+ublk request buffer is represented by bio/bvec, which is immutable, so do
+not try to change bvec via buffer reference; data can be read from or
+written to the buffer according to buffer direction, but bvec can't be
+changed
+
+- buffer lifetime
+
+Ublk server borrows ublk request buffer for handling ublk IO, ublk request
+buffer reference is used. Reference can't outlive the referent buffer. That
+means all request buffer references have to be released by ublk server
+before ublk driver completes this request, when request buffer ownership
+is transferred to upper layer(FS, application, ...).
+
+Also after ublk request is completed, any page belonging to this ublk
+request can not be written or read any more from ublk server since it is
+one block device from kernel viewpoint.
+
+- buffer direction
+
+For ublk WRITE request, ublk request buffer should only be accessed as data
+source, and the buffer can't be written by ublk server
+
+For ublk READ request, ublk request buffer should only be accessed as data
+destination, and the buffer can't be read by ublk server, otherwise kernel
+data is leaked to ublk server, which can be unprivileged application.
+
+- arbitrary size sub-buffer needs to be retrieved from ublk server
+
+ublk is one generic framework for implementing block device in userspace,
+and typical requirements include logical volume manager(mirror, stripped, ...),
+distributed network storage, compressed target, ...
+
+ublk server needs to retrieve arbitrary size sub-buffer of ublk request, and
+ublk server needs to submit IOs with these sub-buffer(s). That also means
+arbitrary size sub-buffer(s) can be used to submit IO multiple times.
+
+Any sub-buffer is actually one reference of ublk request buffer, which
+ownership can't be transferred to upper layer if any reference is held
+by ublk server.
+
+Why slice isn't good for ublk zero copy
+---------------------------------------
+
+- spliced page from ->splice_read() can't be written
+
+ublk READ request can't be handled because spliced page can't be written to, and
+extending splice for ublk zero copy isn't one good solution [#splice_extend]_
+
+- it is very hard to meet above requirements  wrt. request buffer lifetime
+
+splice/pipe focuses on page reference lifetime, but ublk zero copy pays more
+attention to ublk request buffer lifetime. If is very inefficient to respect
+request buffer lifetime by using all pipe buffer's ->release() which requires
+all pipe buffers and pipe to be kept when ublk server handles IO. That means
+one single dedicated ``pipe_inode_info`` has to be allocated runtime for each
+provided buffer, and the pipe needs to be populated with pages in ublk request
+buffer.
+
+
+io_uring fused command based zero copy
+--------------------------------------
+
+io_uring fused command includes one master command(uring command) and one
+generic slave request. The master command is responsible for submitting
+slave request with provided buffer from ublk request, and master command
+won't be completed until the slave request is completed.
+
+Typical ublk IO handling includes network and FS IO, so it is usual enough
+for io_uring net & fs to support IO with provided buffer from master command.
 
-Zero copy is a generic requirement for nbd, fuse or similar drivers. A
-problem [#xiaoguang]_ Xiaoguang mentioned is that pages mapped to userspace
-can't be remapped any more in kernel with existing mm interfaces. This can
-occurs when destining direct IO to ``/dev/ublkb*``. Also, he reported that
-big requests (IO size >= 256 KB) may benefit a lot from zero copy.
+Once master command is submitted successfully, ublk driver guarantees that
+the ublk request buffer won't be gone away since slave request actually
+grabs the buffer's reference. This way also guarantees that multiple
+concurrent fused commands associated with same request buffer works fine,
+as the provided buffer reference is shared & read-only.
 
+Also buffer usage direction flag is passed to master command from userspace,
+so ublk driver can validate if it is legal to use buffer with requested
+direction.
 
 References
 ==========
@@ -323,4 +431,4 @@ References
 
 .. [#stefan] https://lore.kernel.org/linux-block/[email protected]/
 
-.. [#xiaoguang] https://lore.kernel.org/linux-block/[email protected]/
+.. [#splice_extend] https://lore.kernel.org/linux-block/CAHk-=wgJsi7t7YYpuo6ewXGnHz2nmj67iWR6KPGoz5TBu34mWQ@mail.gmail.com/
diff --git a/drivers/block/ublk_drv.c b/drivers/block/ublk_drv.c
index 979444647831..9b6e11ef1fc3 100644
--- a/drivers/block/ublk_drv.c
+++ b/drivers/block/ublk_drv.c
@@ -74,10 +74,15 @@ struct ublk_rq_data {
 	 *   successfully
 	 */
 	struct kref ref;
+	bool allocated_bvec;
+	struct io_uring_bvec_buf buf[0];
 };
 
 struct ublk_uring_cmd_pdu {
-	struct ublk_queue *ubq;
+	union {
+		struct ublk_queue *ubq;
+		struct request *req;
+	};
 };
 
 /*
@@ -565,6 +570,69 @@ static size_t ublk_copy_user_pages(const struct request *req,
 	return done;
 }
 
+/*
+ * The built command buffer is immutable, so it is fine to feed it to
+ * concurrent io_uring fused commands
+ */
+static int ublk_init_zero_copy_buffer(struct request *rq)
+{
+	struct ublk_rq_data *data = blk_mq_rq_to_pdu(rq);
+	struct io_uring_bvec_buf *imu = data->buf;
+	struct req_iterator rq_iter;
+	unsigned int nr_bvecs = 0;
+	struct bio_vec *bvec;
+	unsigned int offset;
+	struct bio_vec bv;
+
+	if (!ublk_rq_has_data(rq))
+		goto exit;
+
+	rq_for_each_bvec(bv, rq, rq_iter)
+		nr_bvecs++;
+
+	if (!nr_bvecs)
+		goto exit;
+
+	if (rq->bio != rq->biotail) {
+		int idx = 0;
+
+		bvec = kvmalloc_array(sizeof(struct bio_vec), nr_bvecs,
+				GFP_NOIO);
+		if (!bvec)
+			return -ENOMEM;
+
+		offset = 0;
+		rq_for_each_bvec(bv, rq, rq_iter)
+			bvec[idx++] = bv;
+		data->allocated_bvec = true;
+	} else {
+		struct bio *bio = rq->bio;
+
+		offset = bio->bi_iter.bi_bvec_done;
+		bvec = __bvec_iter_bvec(bio->bi_io_vec, bio->bi_iter);
+	}
+	imu->bvec = bvec;
+	imu->nr_bvecs = nr_bvecs;
+	imu->offset = offset;
+	imu->len = blk_rq_bytes(rq);
+
+	return 0;
+exit:
+	imu->bvec = NULL;
+	return 0;
+}
+
+static void ublk_deinit_zero_copy_buffer(struct request *rq)
+{
+	struct ublk_rq_data *data = blk_mq_rq_to_pdu(rq);
+	struct io_uring_bvec_buf *imu = data->buf;
+
+	if (data->allocated_bvec) {
+		kvfree(imu->bvec);
+		data->allocated_bvec = false;
+	}
+}
+
 static inline bool ublk_need_map_req(const struct request *req)
 {
 	return ublk_rq_has_data(req) && req_op(req) == REQ_OP_WRITE;
@@ -575,11 +643,23 @@ static inline bool ublk_need_unmap_req(const struct request *req)
 	return ublk_rq_has_data(req) && req_op(req) == REQ_OP_READ;
 }
 
-static int ublk_map_io(const struct ublk_queue *ubq, const struct request *req,
+static int ublk_map_io(const struct ublk_queue *ubq, struct request *req,
 		struct ublk_io *io)
 {
 	const unsigned int rq_bytes = blk_rq_bytes(req);
 
+	if (ublk_support_zc(ubq)) {
+		int ret = ublk_init_zero_copy_buffer(req);
+
+		/*
+		 * The only failure is -ENOMEM for allocating fused cmd
+		 * buffer, return zero so that we can requeue this req.
+		 */
+		if (unlikely(ret))
+			return 0;
+		return rq_bytes;
+	}
+
 	/*
 	 * no zero copy, we delay copy WRITE request data into ublksrv
 	 * context and the big benefit is that pinning pages in current
@@ -599,11 +679,17 @@ static int ublk_map_io(const struct ublk_queue *ubq, const struct request *req,
 }
 
 static int ublk_unmap_io(const struct ublk_queue *ubq,
-		const struct request *req,
+		struct request *req,
 		struct ublk_io *io)
 {
 	const unsigned int rq_bytes = blk_rq_bytes(req);
 
+	if (ublk_support_zc(ubq)) {
+		ublk_deinit_zero_copy_buffer(req);
+
+		return rq_bytes;
+	}
+
 	if (ublk_need_unmap_req(req)) {
 		struct iov_iter iter;
 		struct iovec iov;
@@ -687,6 +773,12 @@ static inline struct ublk_uring_cmd_pdu *ublk_get_uring_cmd_pdu(
 	return (struct ublk_uring_cmd_pdu *)&ioucmd->pdu;
 }
 
+static inline struct ublk_uring_cmd_pdu *ublk_get_uring_fused_cmd_pdu(
+		struct io_uring_cmd *ioucmd)
+{
+	return (struct ublk_uring_cmd_pdu *)&ioucmd->fused.pdu;
+}
+
 static inline bool ubq_daemon_is_dying(struct ublk_queue *ubq)
 {
 	return ubq->ubq_daemon->flags & PF_EXITING;
@@ -742,6 +834,7 @@ static inline void __ublk_complete_rq(struct request *req)
 
 	return;
 exit:
+	ublk_deinit_zero_copy_buffer(req);
 	blk_mq_end_request(req, res);
 }
 
@@ -1347,6 +1440,67 @@ static inline struct request *__ublk_check_and_get_req(struct ublk_device *ub,
 	return NULL;
 }
 
+static void ublk_fused_cmd_done_cb(struct io_uring_cmd *cmd)
+{
+	struct ublk_uring_cmd_pdu *pdu = ublk_get_uring_fused_cmd_pdu(cmd);
+	struct request *req = pdu->req;
+	struct ublk_queue *ubq = req->mq_hctx->driver_data;
+
+	ublk_put_req_ref(ubq, req);
+	io_uring_cmd_done(cmd, cmd->fused.data.slave_res, 0);
+}
+
+static inline bool ublk_check_fused_buf_dir(const struct request *req,
+		unsigned int flags)
+{
+	flags &= IO_URING_F_FUSED;
+
+	if (req_op(req) == REQ_OP_READ && flags == IO_URING_F_FUSED_BUF_DEST)
+		return true;
+
+	if (req_op(req) == REQ_OP_WRITE && flags == IO_URING_F_FUSED_BUF_SRC)
+		return true;
+
+	return false;
+}
+
+static int ublk_handle_fused_cmd(struct io_uring_cmd *cmd,
+		struct ublk_queue *ubq, int tag, unsigned int issue_flags)
+{
+	struct ublk_uring_cmd_pdu *pdu = ublk_get_uring_fused_cmd_pdu(cmd);
+	struct ublk_device *ub = cmd->file->private_data;
+	struct ublk_rq_data *data;
+	struct request *req;
+
+	if (!ub)
+		return -EPERM;
+
+	if (!(issue_flags & IO_URING_F_FUSED))
+		goto exit;
+
+	req = __ublk_check_and_get_req(ub, ubq, tag, 0);
+	if (!req)
+		goto exit;
+
+	pr_devel("%s: qid %d tag %u request bytes %u, issue flags %x\n",
+			__func__, tag, ubq->q_id, blk_rq_bytes(req),
+			issue_flags);
+
+	if (!ublk_check_fused_buf_dir(req, issue_flags))
+		goto exit_put_ref;
+
+	pdu->req = req;
+	data = blk_mq_rq_to_pdu(req);
+	io_fused_cmd_start_slave_req(cmd, !(issue_flags & IO_URING_F_UNLOCKED),
+			data->buf, ublk_fused_cmd_done_cb);
+	return -EIOCBQUEUED;
+
+exit_put_ref:
+	ublk_put_req_ref(ubq, req);
+exit:
+	return -EINVAL;
+}
+
 static int ublk_ch_uring_cmd(struct io_uring_cmd *cmd, unsigned int issue_flags)
 {
 	struct ublksrv_io_cmd *ub_cmd = (struct ublksrv_io_cmd *)cmd->cmd;
@@ -1362,6 +1516,10 @@ static int ublk_ch_uring_cmd(struct io_uring_cmd *cmd, unsigned int issue_flags)
 			__func__, cmd->cmd_op, ub_cmd->q_id, tag,
 			ub_cmd->result);
 
+	if ((issue_flags & IO_URING_F_FUSED) &&
+			cmd_op != UBLK_IO_FUSED_SUBMIT_IO)
+		return -EOPNOTSUPP;
+
 	if (ub_cmd->q_id >= ub->dev_info.nr_hw_queues)
 		goto out;
 
@@ -1369,7 +1527,12 @@ static int ublk_ch_uring_cmd(struct io_uring_cmd *cmd, unsigned int issue_flags)
 	if (!ubq || ub_cmd->q_id != ubq->q_id)
 		goto out;
 
-	if (ubq->ubq_daemon && ubq->ubq_daemon != current)
+	/*
+	 * The fused command reads the io buffer data structure only, so it
+	 * is fine to be issued from other context.
+	 */
+	if ((ubq->ubq_daemon && ubq->ubq_daemon != current) &&
+			(cmd_op != UBLK_IO_FUSED_SUBMIT_IO))
 		goto out;
 
 	if (tag >= ubq->q_depth)
@@ -1392,6 +1555,9 @@ static int ublk_ch_uring_cmd(struct io_uring_cmd *cmd, unsigned int issue_flags)
 		goto out;
 
 	switch (cmd_op) {
+	case UBLK_IO_FUSED_SUBMIT_IO:
+		return ublk_handle_fused_cmd(cmd, ubq, tag, issue_flags);
+
 	case UBLK_IO_FETCH_REQ:
 		/* UBLK_IO_FETCH_REQ is only allowed before queue is setup */
 		if (ublk_queue_ready(ubq)) {
@@ -1721,11 +1887,14 @@ static void ublk_align_max_io_size(struct ublk_device *ub)
 
 static int ublk_add_tag_set(struct ublk_device *ub)
 {
+	int zc = !!(ub->dev_info.flags & UBLK_F_SUPPORT_ZERO_COPY);
+	struct ublk_rq_data *data;
+
 	ub->tag_set.ops = &ublk_mq_ops;
 	ub->tag_set.nr_hw_queues = ub->dev_info.nr_hw_queues;
 	ub->tag_set.queue_depth = ub->dev_info.queue_depth;
 	ub->tag_set.numa_node = NUMA_NO_NODE;
-	ub->tag_set.cmd_size = sizeof(struct ublk_rq_data);
+	ub->tag_set.cmd_size = struct_size(data, buf, zc);
 	ub->tag_set.flags = BLK_MQ_F_SHOULD_MERGE;
 	ub->tag_set.driver_data = ub;
 	return blk_mq_alloc_tag_set(&ub->tag_set);
@@ -1941,12 +2110,18 @@ static int ublk_ctrl_add_dev(struct io_uring_cmd *cmd)
 	 */
 	ub->dev_info.flags &= UBLK_F_ALL;
 
+	/*
+	 * NEED_GET_DATA doesn't make sense any more in case that
+	 * ZERO_COPY is requested. Another reason is that userspace
+	 * can read/write io request buffer by pread()/pwrite() with
+	 * each io buffer's position.
+	 */
+	if (ub->dev_info.flags & UBLK_F_SUPPORT_ZERO_COPY)
+		ub->dev_info.flags &= ~UBLK_F_NEED_GET_DATA;
+
 	if (!IS_BUILTIN(CONFIG_BLK_DEV_UBLK))
 		ub->dev_info.flags |= UBLK_F_URING_CMD_COMP_IN_TASK;
 
-	/* We are not ready to support zero copy */
-	ub->dev_info.flags &= ~UBLK_F_SUPPORT_ZERO_COPY;
-
 	ub->dev_info.nr_hw_queues = min_t(unsigned int,
 			ub->dev_info.nr_hw_queues, nr_cpu_ids);
 	ublk_align_max_io_size(ub);
diff --git a/include/uapi/linux/ublk_cmd.h b/include/uapi/linux/ublk_cmd.h
index d1a6b3dc0327..c4f3465399cf 100644
--- a/include/uapi/linux/ublk_cmd.h
+++ b/include/uapi/linux/ublk_cmd.h
@@ -44,6 +44,7 @@
 #define	UBLK_IO_FETCH_REQ		0x20
 #define	UBLK_IO_COMMIT_AND_FETCH_REQ	0x21
 #define	UBLK_IO_NEED_GET_DATA	0x22
+#define	UBLK_IO_FUSED_SUBMIT_IO	0x23
 
 /* only ABORT means that no re-fetch */
 #define UBLK_IO_RES_OK			0
@@ -85,10 +86,7 @@ static inline __u64 ublk_pos(__u16 q_id, __u16 tag, __u32 offset)
 		((((__u64)tag) << UBLK_BUF_SIZE_BITS) + offset);
 }
 
-/*
- * zero copy requires 4k block size, and can remap ublk driver's io
- * request into ublksrv's vm space
- */
+/* io_uring fused command based zero copy */
 #define UBLK_F_SUPPORT_ZERO_COPY	(1ULL << 0)
 
 /*
-- 
2.39.2


^ permalink raw reply related	[flat|nested] 28+ messages in thread

* RE: [PATCH V4 00/17] io_uring/ublk: add IORING_OP_FUSED_CMD
  2023-03-24 13:57 ` [PATCH V4 00/17] io_uring/ublk: add IORING_OP_FUSED_CMD Ming Lei
                     ` (16 preceding siblings ...)
  2023-03-24 13:58   ` [PATCH V4 17/17] block: ublk_drv: apply io_uring FUSED_CMD for supporting " Ming Lei
@ 2023-03-28  0:36   ` Dan Williams
  2023-03-28  1:16     ` Ming Lei
  2023-03-28  5:10   ` Kanchan Joshi
  18 siblings, 1 reply; 28+ messages in thread
From: Dan Williams @ 2023-03-28  0:36 UTC (permalink / raw)
  To: Ming Lei, Jens Axboe, io-uring, linux-block
  Cc: linux-kernel, Miklos Szeredi, ZiyangZhang, Xiaoguang Wang,
	Bernd Schubert, Pavel Begunkov, Stefan Hajnoczi, Ming Lei

Ming Lei wrote:
> Hello Jens,
> 
> Add IORING_OP_FUSED_CMD, it is one special URING_CMD, which has to
> be SQE128. The 1st SQE(master) is one 64byte URING_CMD, and the 2nd
> 64byte SQE(slave) is another normal 64byte OP. For any OP which needs
> to support slave OP, io_issue_defs[op].fused_slave needs to be set as 1,
> and its ->issue() can retrieve/import buffer from master request's
> fused_cmd_kbuf. The slave OP is actually submitted from kernel, part of
> this idea is from Xiaoguang's ublk ebpf patchset, but this patchset
> submits slave OP just like normal OP issued from userspace, that said,
> SQE order is kept, and batching handling is done too.

Hi Ming,

io_uring and ublk are starting to be more on my radar these days. I
wanted to take a look at this series, but could not get past the
distracting "master"/"slave" terminology in this lead-in paragraph let
alone start looking at patches.

Frankly, the description sounds more like "head"/"tail", or even
"fuse0"/"fuse1" because, for example, who is to say you might not have
larger fused ops in the future and need terminology to address
"fuse{0,1,2,3}"?

Once that's fixed up I can take a look at forwarding on to others that
might be interested in this use case.

https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/process/coding-style.rst#n338

Thanks in advance for fixing that up!

^ permalink raw reply	[flat|nested] 28+ messages in thread

* Re: [PATCH V4 00/17] io_uring/ublk: add IORING_OP_FUSED_CMD
  2023-03-28  0:36   ` [PATCH V4 00/17] io_uring/ublk: add IORING_OP_FUSED_CMD Dan Williams
@ 2023-03-28  1:16     ` Ming Lei
  2023-03-28  1:29       ` Jens Axboe
                         ` (2 more replies)
  0 siblings, 3 replies; 28+ messages in thread
From: Ming Lei @ 2023-03-28  1:16 UTC (permalink / raw)
  To: Dan Williams
  Cc: Jens Axboe, io-uring, linux-block, linux-kernel, Miklos Szeredi,
	ZiyangZhang, Xiaoguang Wang, Bernd Schubert, Pavel Begunkov,
	Stefan Hajnoczi, ming.lei

Hi Dan,

On Mon, Mar 27, 2023 at 05:36:33PM -0700, Dan Williams wrote:
> Ming Lei wrote:
> > Hello Jens,
> > 
> > Add IORING_OP_FUSED_CMD, it is one special URING_CMD, which has to
> > be SQE128. The 1st SQE(master) is one 64byte URING_CMD, and the 2nd
> > 64byte SQE(slave) is another normal 64byte OP. For any OP which needs
> > to support slave OP, io_issue_defs[op].fused_slave needs to be set as 1,
> > and its ->issue() can retrieve/import buffer from master request's
> > fused_cmd_kbuf. The slave OP is actually submitted from kernel, part of
> > this idea is from Xiaoguang's ublk ebpf patchset, but this patchset
> > submits slave OP just like normal OP issued from userspace, that said,
> > SQE order is kept, and batching handling is done too.
> 
> Hi Ming,
> 
> io_uring and ublk are starting to be more on my radar these days. I
> wanted to take a look at this series, but could not get past the
> distracting "master"/"slave" terminology in this lead-in paragraph let
> alone start looking at patches.
> 
> Frankly, the description sounds more like "head"/"tail", or even
> "fuse0"/"fuse1" because, for example, who is to say you might not have

The term "master/slave" is from patches.

The master command not only provides buffer for slave request, but also requires
slave request for serving master command, and master command is always completed
after all slave request are done.

That is why it is named as master/slave. Actually Jens raised the similar concern
and I hate the name too, but it is always hard to figure out perfect name, or
any other name for reflecting the relation? (head/tail, fuse0/1 can't
do that, IMO)

> larger fused ops in the future and need terminology to address
> "fuse{0,1,2,3}"?

Yeah, definitely, the interface can be extended in future to support
multiple "slave" requests.

Thanks,
Ming


^ permalink raw reply	[flat|nested] 28+ messages in thread

* Re: [PATCH V4 00/17] io_uring/ublk: add IORING_OP_FUSED_CMD
  2023-03-28  1:16     ` Ming Lei
@ 2023-03-28  1:29       ` Jens Axboe
  2023-03-28  1:35         ` Ming Lei
  2023-03-28  1:31       ` Dan Williams
  2023-03-28  3:13       ` Gao Xiang
  2 siblings, 1 reply; 28+ messages in thread
From: Jens Axboe @ 2023-03-28  1:29 UTC (permalink / raw)
  To: Ming Lei, Dan Williams
  Cc: io-uring, linux-block, linux-kernel, Miklos Szeredi, ZiyangZhang,
	Xiaoguang Wang, Bernd Schubert, Pavel Begunkov, Stefan Hajnoczi

On 3/27/23 7:16 PM, Ming Lei wrote:
> Hi Dan,
> 
> On Mon, Mar 27, 2023 at 05:36:33PM -0700, Dan Williams wrote:
>> Ming Lei wrote:
>>> Hello Jens,
>>>
>>> Add IORING_OP_FUSED_CMD, it is one special URING_CMD, which has to
>>> be SQE128. The 1st SQE(master) is one 64byte URING_CMD, and the 2nd
>>> 64byte SQE(slave) is another normal 64byte OP. For any OP which needs
>>> to support slave OP, io_issue_defs[op].fused_slave needs to be set as 1,
>>> and its ->issue() can retrieve/import buffer from master request's
>>> fused_cmd_kbuf. The slave OP is actually submitted from kernel, part of
>>> this idea is from Xiaoguang's ublk ebpf patchset, but this patchset
>>> submits slave OP just like normal OP issued from userspace, that said,
>>> SQE order is kept, and batching handling is done too.
>>
>> Hi Ming,
>>
>> io_uring and ublk are starting to be more on my radar these days. I
>> wanted to take a look at this series, but could not get past the
>> distracting "master"/"slave" terminology in this lead-in paragraph let
>> alone start looking at patches.
>>
>> Frankly, the description sounds more like "head"/"tail", or even
>> "fuse0"/"fuse1" because, for example, who is to say you might not have
> 
> The term "master/slave" is from patches.
> 
> The master command not only provides buffer for slave request, but also requires
> slave request for serving master command, and master command is always completed
> after all slave request are done.
> 
> That is why it is named as master/slave. Actually Jens raised the similar concern
> and I hate the name too, but it is always hard to figure out perfect name, or
> any other name for reflecting the relation? (head/tail, fuse0/1 can't
> do that, IMO)

Indeed. What about primary/secondary? And it'd be quite possible to have
multiple secondaries too.

-- 
Jens Axboe



^ permalink raw reply	[flat|nested] 28+ messages in thread

* Re: [PATCH V4 00/17] io_uring/ublk: add IORING_OP_FUSED_CMD
  2023-03-28  1:16     ` Ming Lei
  2023-03-28  1:29       ` Jens Axboe
@ 2023-03-28  1:31       ` Dan Williams
  2023-03-28  2:02         ` Ming Lei
  2023-03-28  3:13       ` Gao Xiang
  2 siblings, 1 reply; 28+ messages in thread
From: Dan Williams @ 2023-03-28  1:31 UTC (permalink / raw)
  To: Ming Lei, Dan Williams
  Cc: Jens Axboe, io-uring, linux-block, linux-kernel, Miklos Szeredi,
	ZiyangZhang, Xiaoguang Wang, Bernd Schubert, Pavel Begunkov,
	Stefan Hajnoczi, ming.lei

Ming Lei wrote:
> Hi Dan,
> 
> On Mon, Mar 27, 2023 at 05:36:33PM -0700, Dan Williams wrote:
> > Ming Lei wrote:
> > > Hello Jens,
> > > 
> > > Add IORING_OP_FUSED_CMD, it is one special URING_CMD, which has to
> > > be SQE128. The 1st SQE(master) is one 64byte URING_CMD, and the 2nd
> > > 64byte SQE(slave) is another normal 64byte OP. For any OP which needs
> > > to support slave OP, io_issue_defs[op].fused_slave needs to be set as 1,
> > > and its ->issue() can retrieve/import buffer from master request's
> > > fused_cmd_kbuf. The slave OP is actually submitted from kernel, part of
> > > this idea is from Xiaoguang's ublk ebpf patchset, but this patchset
> > > submits slave OP just like normal OP issued from userspace, that said,
> > > SQE order is kept, and batching handling is done too.
> > 
> > Hi Ming,
> > 
> > io_uring and ublk are starting to be more on my radar these days. I
> > wanted to take a look at this series, but could not get past the
> > distracting "master"/"slave" terminology in this lead-in paragraph let
> > alone start looking at patches.
> > 
> > Frankly, the description sounds more like "head"/"tail", or even
> > "fuse0"/"fuse1" because, for example, who is to say you might not have
> 
> The term "master/slave" is from patches.

From what patches?

I did not understand this explanation either:

https://lore.kernel.org/all/[email protected]/

> The master command not only provides buffer for slave request, but also requires
> slave request for serving master command, and master command is always completed
> after all slave request are done.

In terms of core kernel concepts that description aligns more with
idiomatic "parent"/"child" relationships where the child object holds a
reference on the parent.

> That is why it is named as master/slave.

That explanation did not clarify.

> Actually Jens raised the similar concern

Thanks Jens!

> ...and I hate the name too, but it is always hard to figure out
> perfect name, or any other name for reflecting the relation?
> (head/tail, fuse0/1 can't do that, IMO)

Naming is hard, and master/slave is not appropriate so this needs a new
name. The reason I mentioned "head"/"tail" is not for ring buffer
purposes but more for its similarity to pages and folios where the folio
is not unreferenced until all tail pages are unreferenced.

In short there are several options that add more clarity and avoid
running afoul of coding-style.

> > larger fused ops in the future and need terminology to address
> > "fuse{0,1,2,3}"?
> 
> Yeah, definitely, the interface can be extended in future to support
> multiple "slave" requests.

Right, so why not just name them fuse0,1...n and specify that fuse0 is
the head of a fused op?

^ permalink raw reply	[flat|nested] 28+ messages in thread

* Re: [PATCH V4 00/17] io_uring/ublk: add IORING_OP_FUSED_CMD
  2023-03-28  1:29       ` Jens Axboe
@ 2023-03-28  1:35         ` Ming Lei
  0 siblings, 0 replies; 28+ messages in thread
From: Ming Lei @ 2023-03-28  1:35 UTC (permalink / raw)
  To: Jens Axboe
  Cc: Dan Williams, io-uring, linux-block, linux-kernel, Miklos Szeredi,
	ZiyangZhang, Xiaoguang Wang, Bernd Schubert, Pavel Begunkov,
	Stefan Hajnoczi, ming.lei

On Mon, Mar 27, 2023 at 07:29:36PM -0600, Jens Axboe wrote:
> On 3/27/23 7:16 PM, Ming Lei wrote:
> > Hi Dan,
> > 
> > On Mon, Mar 27, 2023 at 05:36:33PM -0700, Dan Williams wrote:
> >> Ming Lei wrote:
> >>> Hello Jens,
> >>>
> >>> Add IORING_OP_FUSED_CMD, it is one special URING_CMD, which has to
> >>> be SQE128. The 1st SQE(master) is one 64byte URING_CMD, and the 2nd
> >>> 64byte SQE(slave) is another normal 64byte OP. For any OP which needs
> >>> to support slave OP, io_issue_defs[op].fused_slave needs to be set as 1,
> >>> and its ->issue() can retrieve/import buffer from master request's
> >>> fused_cmd_kbuf. The slave OP is actually submitted from kernel, part of
> >>> this idea is from Xiaoguang's ublk ebpf patchset, but this patchset
> >>> submits slave OP just like normal OP issued from userspace, that said,
> >>> SQE order is kept, and batching handling is done too.
> >>
> >> Hi Ming,
> >>
> >> io_uring and ublk are starting to be more on my radar these days. I
> >> wanted to take a look at this series, but could not get past the
> >> distracting "master"/"slave" terminology in this lead-in paragraph let
> >> alone start looking at patches.
> >>
> >> Frankly, the description sounds more like "head"/"tail", or even
> >> "fuse0"/"fuse1" because, for example, who is to say you might not have
> > 
> > The term "master/slave" is from patches.
> > 
> > The master command not only provides buffer for slave request, but also requires
> > slave request for serving master command, and master command is always completed
> > after all slave request are done.
> > 
> > That is why it is named as master/slave. Actually Jens raised the similar concern
> > and I hate the name too, but it is always hard to figure out perfect name, or
> > any other name for reflecting the relation? (head/tail, fuse0/1 can't
> > do that, IMO)
> 
> Indeed. What about primary/secondary? And it'd be quite possible to have
> multiple secondaries too.

OK, I will take primary/secondary in V5 if no better name is suggested.


Thanks,
Ming


^ permalink raw reply	[flat|nested] 28+ messages in thread

* Re: [PATCH V4 00/17] io_uring/ublk: add IORING_OP_FUSED_CMD
  2023-03-28  1:31       ` Dan Williams
@ 2023-03-28  2:02         ` Ming Lei
  2023-03-28  6:32           ` Dan Williams
  0 siblings, 1 reply; 28+ messages in thread
From: Ming Lei @ 2023-03-28  2:02 UTC (permalink / raw)
  To: Dan Williams
  Cc: Jens Axboe, io-uring, linux-block, linux-kernel, Miklos Szeredi,
	ZiyangZhang, Xiaoguang Wang, Bernd Schubert, Pavel Begunkov,
	Stefan Hajnoczi, ming.lei

On Mon, Mar 27, 2023 at 06:31:37PM -0700, Dan Williams wrote:
> Ming Lei wrote:
> > Hi Dan,
> > 
> > On Mon, Mar 27, 2023 at 05:36:33PM -0700, Dan Williams wrote:
> > > Ming Lei wrote:
> > > > Hello Jens,
> > > > 
> > > > Add IORING_OP_FUSED_CMD, it is one special URING_CMD, which has to
> > > > be SQE128. The 1st SQE(master) is one 64byte URING_CMD, and the 2nd
> > > > 64byte SQE(slave) is another normal 64byte OP. For any OP which needs
> > > > to support slave OP, io_issue_defs[op].fused_slave needs to be set as 1,
> > > > and its ->issue() can retrieve/import buffer from master request's
> > > > fused_cmd_kbuf. The slave OP is actually submitted from kernel, part of
> > > > this idea is from Xiaoguang's ublk ebpf patchset, but this patchset
> > > > submits slave OP just like normal OP issued from userspace, that said,
> > > > SQE order is kept, and batching handling is done too.
> > > 
> > > Hi Ming,
> > > 
> > > io_uring and ublk are starting to be more on my radar these days. I
> > > wanted to take a look at this series, but could not get past the
> > > distracting "master"/"slave" terminology in this lead-in paragraph let
> > > alone start looking at patches.
> > > 
> > > Frankly, the description sounds more like "head"/"tail", or even
> > > "fuse0"/"fuse1" because, for example, who is to say you might not have
> > 
> > The term "master/slave" is from patches.
> 
> From what patches?

https://lore.kernel.org/linux-block/[email protected]/T/#u

> 
> I did not understand this explanation either:
> 
> https://lore.kernel.org/all/[email protected]/

Jens just suggested primary/secondary, which looks better, and I will
use them in this thread and next version.

> 
> > The master command not only provides buffer for slave request, but also requires
> > slave request for serving master command, and master command is always completed
> > after all slave request are done.
> 
> In terms of core kernel concepts that description aligns more with
> idiomatic "parent"/"child" relationships where the child object holds a
> reference on the parent.

Yeah, holding reference is true for both two relationships.

But "parent"/"child" relationship is often one long-time relation, but here
both requests are short-time objects, just the secondary requests need to
grab primary command buffer for running IO. After secondary requests IO
is done, the relation is over. So it is sort of temporary/short-term relation,
like contract.

Also the buffer meta(bvec) data are readable for all secondary requests,
and secondary requests have to use buffer in the primary command allowed
direction. So the relation is very limited.

> 
> > That is why it is named as master/slave.
> 
> That explanation did not clarify.

Hope the above words help.

> 
> > Actually Jens raised the similar concern
> 
> Thanks Jens!
> 
> > ...and I hate the name too, but it is always hard to figure out
> > perfect name, or any other name for reflecting the relation?
> > (head/tail, fuse0/1 can't do that, IMO)
> 
> Naming is hard, and master/slave is not appropriate so this needs a new
> name. The reason I mentioned "head"/"tail" is not for ring buffer
> purposes but more for its similarity to pages and folios where the folio
> is not unreferenced until all tail pages are unreferenced.
> 
> In short there are several options that add more clarity and avoid
> running afoul of coding-style.
> 
> > > larger fused ops in the future and need terminology to address
> > > "fuse{0,1,2,3}"?
> > 
> > Yeah, definitely, the interface can be extended in future to support
> > multiple "slave" requests.
> 
> Right, so why not just name them fuse0,1...n and specify that fuse0 is
> the head of a fused op?

fuse0, 1...n often means all these objects sharing common property, such
as, all are objects of same class. However, here we do know primary is
completely different with secondary.


Thanks,
Ming


^ permalink raw reply	[flat|nested] 28+ messages in thread

* Re: [PATCH V4 00/17] io_uring/ublk: add IORING_OP_FUSED_CMD
  2023-03-28  1:16     ` Ming Lei
  2023-03-28  1:29       ` Jens Axboe
  2023-03-28  1:31       ` Dan Williams
@ 2023-03-28  3:13       ` Gao Xiang
  2023-03-28  3:33         ` Ming Lei
  2 siblings, 1 reply; 28+ messages in thread
From: Gao Xiang @ 2023-03-28  3:13 UTC (permalink / raw)
  To: Ming Lei, Dan Williams
  Cc: Jens Axboe, io-uring, linux-block, linux-kernel, Miklos Szeredi,
	ZiyangZhang, Xiaoguang Wang, Bernd Schubert, Pavel Begunkov,
	Stefan Hajnoczi



On 2023/3/28 09:16, Ming Lei wrote:
> Hi Dan,
> 
> On Mon, Mar 27, 2023 at 05:36:33PM -0700, Dan Williams wrote:
>> Ming Lei wrote:
>>> Hello Jens,
>>>
>>> Add IORING_OP_FUSED_CMD, it is one special URING_CMD, which has to
>>> be SQE128. The 1st SQE(master) is one 64byte URING_CMD, and the 2nd
>>> 64byte SQE(slave) is another normal 64byte OP. For any OP which needs
>>> to support slave OP, io_issue_defs[op].fused_slave needs to be set as 1,
>>> and its ->issue() can retrieve/import buffer from master request's
>>> fused_cmd_kbuf. The slave OP is actually submitted from kernel, part of
>>> this idea is from Xiaoguang's ublk ebpf patchset, but this patchset
>>> submits slave OP just like normal OP issued from userspace, that said,
>>> SQE order is kept, and batching handling is done too.
>>
>> Hi Ming,
>>
>> io_uring and ublk are starting to be more on my radar these days. I
>> wanted to take a look at this series, but could not get past the
>> distracting "master"/"slave" terminology in this lead-in paragraph let
>> alone start looking at patches.
>>
>> Frankly, the description sounds more like "head"/"tail", or even
>> "fuse0"/"fuse1" because, for example, who is to say you might not have
> 
> The term "master/slave" is from patches.
> 
> The master command not only provides buffer for slave request, but also requires
> slave request for serving master command, and master command is always completed
> after all slave request are done.
> 
> That is why it is named as master/slave. Actually Jens raised the similar concern
> and I hate the name too, but it is always hard to figure out perfect name, or
> any other name for reflecting the relation? (head/tail, fuse0/1 can't
> do that, IMO)
> 
>> larger fused ops in the future and need terminology to address
>> "fuse{0,1,2,3}"?
> 
> Yeah, definitely, the interface can be extended in future to support
> multiple "slave" requests.

I guess master/slave (especially now) have bad meaning to
English-language guys so it's better to avoid it.

Thanks,
Gao Xiang

> 
> Thanks,
> Ming

^ permalink raw reply	[flat|nested] 28+ messages in thread

* Re: [PATCH V4 00/17] io_uring/ublk: add IORING_OP_FUSED_CMD
  2023-03-28  3:13       ` Gao Xiang
@ 2023-03-28  3:33         ` Ming Lei
  0 siblings, 0 replies; 28+ messages in thread
From: Ming Lei @ 2023-03-28  3:33 UTC (permalink / raw)
  To: Gao Xiang
  Cc: Dan Williams, Jens Axboe, io-uring, linux-block, linux-kernel,
	Miklos Szeredi, ZiyangZhang, Xiaoguang Wang, Bernd Schubert,
	Pavel Begunkov, Stefan Hajnoczi, ming.lei

On Tue, Mar 28, 2023 at 11:13:53AM +0800, Gao Xiang wrote:
> 
> 
> On 2023/3/28 09:16, Ming Lei wrote:
> > Hi Dan,
> > 
> > On Mon, Mar 27, 2023 at 05:36:33PM -0700, Dan Williams wrote:
> > > Ming Lei wrote:
> > > > Hello Jens,
> > > > 
> > > > Add IORING_OP_FUSED_CMD, it is one special URING_CMD, which has to
> > > > be SQE128. The 1st SQE(master) is one 64byte URING_CMD, and the 2nd
> > > > 64byte SQE(slave) is another normal 64byte OP. For any OP which needs
> > > > to support slave OP, io_issue_defs[op].fused_slave needs to be set as 1,
> > > > and its ->issue() can retrieve/import buffer from master request's
> > > > fused_cmd_kbuf. The slave OP is actually submitted from kernel, part of
> > > > this idea is from Xiaoguang's ublk ebpf patchset, but this patchset
> > > > submits slave OP just like normal OP issued from userspace, that said,
> > > > SQE order is kept, and batching handling is done too.
> > > 
> > > Hi Ming,
> > > 
> > > io_uring and ublk are starting to be more on my radar these days. I
> > > wanted to take a look at this series, but could not get past the
> > > distracting "master"/"slave" terminology in this lead-in paragraph let
> > > alone start looking at patches.
> > > 
> > > Frankly, the description sounds more like "head"/"tail", or even
> > > "fuse0"/"fuse1" because, for example, who is to say you might not have
> > 
> > The term "master/slave" is from patches.
> > 
> > The master command not only provides buffer for slave request, but also requires
> > slave request for serving master command, and master command is always completed
> > after all slave request are done.
> > 
> > That is why it is named as master/slave. Actually Jens raised the similar concern
> > and I hate the name too, but it is always hard to figure out perfect name, or
> > any other name for reflecting the relation? (head/tail, fuse0/1 can't
> > do that, IMO)
> > 
> > > larger fused ops in the future and need terminology to address
> > > "fuse{0,1,2,3}"?
> > 
> > Yeah, definitely, the interface can be extended in future to support
> > multiple "slave" requests.
> 
> I guess master/slave (especially now) have bad meaning to
> English-language guys so it's better to avoid it.

Absolutely no offense given English isn't my native language, so
let's move on with V5.


Thanks,
Ming


^ permalink raw reply	[flat|nested] 28+ messages in thread

* Re: [PATCH V4 00/17] io_uring/ublk: add IORING_OP_FUSED_CMD
  2023-03-24 13:57 ` [PATCH V4 00/17] io_uring/ublk: add IORING_OP_FUSED_CMD Ming Lei
                     ` (17 preceding siblings ...)
  2023-03-28  0:36   ` [PATCH V4 00/17] io_uring/ublk: add IORING_OP_FUSED_CMD Dan Williams
@ 2023-03-28  5:10   ` Kanchan Joshi
  18 siblings, 0 replies; 28+ messages in thread
From: Kanchan Joshi @ 2023-03-28  5:10 UTC (permalink / raw)
  To: Ming Lei
  Cc: Jens Axboe, io-uring, linux-block, linux-kernel, Miklos Szeredi,
	ZiyangZhang, Xiaoguang Wang, Bernd Schubert, Pavel Begunkov,
	Stefan Hajnoczi

[-- Attachment #1: Type: text/plain, Size: 1230 bytes --]

On Fri, Mar 24, 2023 at 09:57:51PM +0800, Ming Lei wrote:
>Hello Jens,
>
>Add IORING_OP_FUSED_CMD, it is one special URING_CMD, which has to
>be SQE128. The 1st SQE(master) is one 64byte URING_CMD, and the 2nd
>64byte SQE(slave) is another normal 64byte OP. For any OP which needs
>to support slave OP, io_issue_defs[op].fused_slave needs to be set as 1,
>and its ->issue() can retrieve/import buffer from master request's
>fused_cmd_kbuf. The slave OP is actually submitted from kernel, part of
>this idea is from Xiaoguang's ublk ebpf patchset, but this patchset
>submits slave OP just like normal OP issued from userspace, that said,
>SQE order is kept, and batching handling is done too.
>
>Please see detailed design in commit log of the 2th patch, and one big
>point is how to handle buffer ownership.
>
>With this way, it is easy to support zero copy for ublk/fuse device.
>
>Basically userspace can specify any sub-buffer of the ublk block request
>buffer from the fused command just by setting 'offset/len'
>in the slave SQE for running slave OP. 

Wondering if this new OP can also be used to do larger IO (than
device limit) on nvme-passthrough?
For example, 1MB IO on NVMe than has 512k or 256K maximum transfer
size.

[-- Attachment #2: Type: text/plain, Size: 0 bytes --]



^ permalink raw reply	[flat|nested] 28+ messages in thread

* Re: [PATCH V4 00/17] io_uring/ublk: add IORING_OP_FUSED_CMD
  2023-03-28  2:02         ` Ming Lei
@ 2023-03-28  6:32           ` Dan Williams
  0 siblings, 0 replies; 28+ messages in thread
From: Dan Williams @ 2023-03-28  6:32 UTC (permalink / raw)
  To: Ming Lei, Dan Williams
  Cc: Jens Axboe, io-uring, linux-block, linux-kernel, Miklos Szeredi,
	ZiyangZhang, Xiaoguang Wang, Bernd Schubert, Pavel Begunkov,
	Stefan Hajnoczi, ming.lei

Ming Lei wrote:
> Jens just suggested primary/secondary, which looks better, and I will
> use them in this thread and next version.

Sounds good, thank you.

^ permalink raw reply	[flat|nested] 28+ messages in thread

end of thread, other threads:[~2023-03-28  6:32 UTC | newest]

Thread overview: 28+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
     [not found] <CGME20230324135916epcas5p37aad4c49c76c05567a484377d8909092@epcas5p3.samsung.com>
2023-03-24 13:57 ` [PATCH V4 00/17] io_uring/ublk: add IORING_OP_FUSED_CMD Ming Lei
2023-03-24 13:57   ` [PATCH V4 01/17] io_uring: increase io_kiocb->flags into 64bit Ming Lei
2023-03-24 13:57   ` [PATCH V4 02/17] io_uring: add IORING_OP_FUSED_CMD Ming Lei
2023-03-24 13:57   ` [PATCH V4 03/17] io_uring: support normal SQE for fused command Ming Lei
2023-03-24 13:57   ` [PATCH V4 04/17] io_uring: support OP_READ/OP_WRITE for fused slave request Ming Lei
2023-03-24 13:57   ` [PATCH V4 05/17] io_uring: support OP_SEND_ZC/OP_RECV " Ming Lei
2023-03-24 13:57   ` [PATCH V4 06/17] block: ublk_drv: mark device as LIVE before adding disk Ming Lei
2023-03-24 13:57   ` [PATCH V4 07/17] block: ublk_drv: add common exit handling Ming Lei
2023-03-24 13:57   ` [PATCH V4 08/17] block: ublk_drv: don't consider flush request in map/unmap io Ming Lei
2023-03-24 13:58   ` [PATCH V4 09/17] block: ublk_drv: add two helpers to clean up map/unmap request Ming Lei
2023-03-24 13:58   ` [PATCH V4 10/17] block: ublk_drv: clean up several helpers Ming Lei
2023-03-24 13:58   ` [PATCH V4 11/17] block: ublk_drv: cleanup 'struct ublk_map_data' Ming Lei
2023-03-24 13:58   ` [PATCH V4 12/17] block: ublk_drv: cleanup ublk_copy_user_pages Ming Lei
2023-03-24 13:58   ` [PATCH V4 13/17] block: ublk_drv: grab request reference when the request is handled by userspace Ming Lei
2023-03-24 13:58   ` [PATCH V4 14/17] block: ublk_drv: support to copy any part of request pages Ming Lei
2023-03-24 13:58   ` [PATCH V4 15/17] block: ublk_drv: add read()/write() support for ublk char device Ming Lei
2023-03-24 13:58   ` [PATCH V4 16/17] block: ublk_drv: don't check buffer in case of zero copy Ming Lei
2023-03-24 13:58   ` [PATCH V4 17/17] block: ublk_drv: apply io_uring FUSED_CMD for supporting " Ming Lei
2023-03-28  0:36   ` [PATCH V4 00/17] io_uring/ublk: add IORING_OP_FUSED_CMD Dan Williams
2023-03-28  1:16     ` Ming Lei
2023-03-28  1:29       ` Jens Axboe
2023-03-28  1:35         ` Ming Lei
2023-03-28  1:31       ` Dan Williams
2023-03-28  2:02         ` Ming Lei
2023-03-28  6:32           ` Dan Williams
2023-03-28  3:13       ` Gao Xiang
2023-03-28  3:33         ` Ming Lei
2023-03-28  5:10   ` Kanchan Joshi

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox