From: Pavel Begunkov <[email protected]>
To: Jens Axboe <[email protected]>, [email protected]
Subject: [PATCH liburing v5 2/2] test/splice: add basic splice tests
Date: Mon, 24 Feb 2020 20:55:01 +0300 [thread overview]
Message-ID: <aa79d4a192bd1a8e68beddfb177618c1cdacf381.1582566728.git.asml.silence@gmail.com> (raw)
In-Reply-To: <[email protected]>
Signed-off-by: Pavel Begunkov <[email protected]>
---
test/Makefile | 5 +-
test/splice.c | 148 ++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 151 insertions(+), 2 deletions(-)
create mode 100644 test/splice.c
diff --git a/test/Makefile b/test/Makefile
index 09c7aa2..8437f31 100644
--- a/test/Makefile
+++ b/test/Makefile
@@ -20,7 +20,7 @@ all_targets += poll poll-cancel ring-leak fsync io_uring_setup io_uring_register
connect 7ad0e4b2f83c-test submit-reuse fallocate open-close \
file-update statx accept-reuse poll-v-poll fadvise madvise \
short-read openat2 probe shared-wq personality eventfd \
- send_recv eventfd-ring across-fork sq-poll-kthread
+ send_recv eventfd-ring across-fork sq-poll-kthread splice
include ../Makefile.quiet
@@ -47,7 +47,8 @@ test_srcs := poll.c poll-cancel.c ring-leak.c fsync.c io_uring_setup.c \
7ad0e4b2f83c-test.c submit-reuse.c fallocate.c open-close.c \
file-update.c statx.c accept-reuse.c poll-v-poll.c fadvise.c \
madvise.c short-read.c openat2.c probe.c shared-wq.c \
- personality.c eventfd.c eventfd-ring.c across-fork.c sq-poll-kthread.c
+ personality.c eventfd.c eventfd-ring.c across-fork.c sq-poll-kthread.c \
+ splice.c
test_objs := $(patsubst %.c,%.ol,$(test_srcs))
diff --git a/test/splice.c b/test/splice.c
new file mode 100644
index 0000000..1eaa788
--- /dev/null
+++ b/test/splice.c
@@ -0,0 +1,148 @@
+#include <errno.h>
+#include <stdio.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <string.h>
+#include <fcntl.h>
+#include <sys/mman.h>
+
+#include "liburing.h"
+
+static int no_splice = 0;
+
+static int copy_single(struct io_uring *ring,
+ int fd_in, loff_t off_in,
+ int fd_out, loff_t off_out,
+ int pipe_fds[2],
+ unsigned int len,
+ unsigned flags1, unsigned flags2)
+{
+ struct io_uring_cqe *cqe;
+ struct io_uring_sqe *sqe;
+ int i, ret = -1;
+
+ sqe = io_uring_get_sqe(ring);
+ if (!sqe) {
+ fprintf(stderr, "get sqe failed\n");
+ return -1;
+ }
+ io_uring_prep_splice(sqe, fd_in, off_in, pipe_fds[1], -1,
+ len, flags1);
+ sqe->flags = IOSQE_IO_LINK;
+
+ sqe = io_uring_get_sqe(ring);
+ if (!sqe) {
+ fprintf(stderr, "get sqe failed\n");
+ return -1;
+ }
+ io_uring_prep_splice(sqe, pipe_fds[0], -1, fd_out, off_out,
+ len, flags2);
+
+ ret = io_uring_submit(ring);
+ if (ret <= 1) {
+ fprintf(stderr, "sqe submit failed: %d\n", ret);
+ return -1;
+ }
+
+ for (i = 0; i < 2; i++) {
+ ret = io_uring_wait_cqe(ring, &cqe);
+ if (ret < 0) {
+ fprintf(stderr, "wait completion %d\n", cqe->res);
+ return ret;
+ }
+
+ ret = cqe->res;
+ if (ret != len) {
+ fprintf(stderr, "splice: returned %i, expected %i\n",
+ cqe->res, len);
+ return ret < 0 ? ret : -1;
+ }
+ io_uring_cqe_seen(ring, cqe);
+ }
+ return 0;
+}
+
+static int test_splice(struct io_uring *ring)
+{
+ int ret = -1, len = 4 * 4096;
+ int fd_out = -1, fd_in = -1;
+ int pipe_fds[2] = {-1, -1};
+
+ if (pipe(pipe_fds) < 0)
+ goto exit;
+ fd_in = open("/dev/urandom", O_RDONLY);
+ if (fd_in < 0)
+ goto exit;
+ fd_out = memfd_create("splice_test_out_file", 0);
+ if (fd_out < 0)
+ goto exit;
+ if (ftruncate(fd_out, len) == -1)
+ goto exit;
+
+ ret = copy_single(ring, fd_in, -1, fd_out, -1, pipe_fds,
+ len, SPLICE_F_MOVE | SPLICE_F_MORE, 0);
+ if (ret == -EINVAL) {
+ no_splice = 1;
+ goto exit;
+ }
+ if (ret) {
+ fprintf(stderr, "basic splice-copy failed\n");
+ goto exit;
+ }
+
+ ret = copy_single(ring, fd_in, 0, fd_out, 0, pipe_fds,
+ len, 0, SPLICE_F_MOVE | SPLICE_F_MORE);
+ if (ret) {
+ fprintf(stderr, "basic splice with offset failed\n");
+ goto exit;
+ }
+
+ ret = io_uring_register_files(ring, &fd_in, 1);
+ if (ret) {
+ fprintf(stderr, "%s: register ret=%d\n", __FUNCTION__, ret);
+ goto exit;
+ }
+
+ ret = copy_single(ring, 0, 0, fd_out, 0, pipe_fds,
+ len, SPLICE_F_FD_IN_FIXED, 0);
+ if (ret) {
+ fprintf(stderr, "basic splice with reg files failed\n");
+ goto exit;
+ }
+
+ ret = 0;
+exit:
+ if (fd_out >= 0)
+ close(fd_out);
+ if (fd_in >= 0)
+ close(fd_in);
+ if (pipe_fds[0] >= 0) {
+ close(pipe_fds[0]);
+ close(pipe_fds[1]);
+ }
+ return ret;
+}
+
+int main(int argc, char *argv[])
+{
+ struct io_uring ring;
+ int ret;
+
+ ret = io_uring_queue_init(8, &ring, 0);
+ if (ret) {
+ fprintf(stderr, "ring setup failed\n");
+ return 1;
+ }
+
+ ret = test_splice(&ring);
+ if (ret && no_splice) {
+ fprintf(stderr, "skip, doesn't support splice()\n");
+ return 0;
+ }
+ if (ret) {
+ fprintf(stderr, "test_splice failed %i %i\n", ret, errno);
+ return ret;
+ }
+
+ return 0;
+}
--
2.24.0
next prev parent reply other threads:[~2020-02-24 17:55 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-24 17:54 [PATCH v5 0/2] splice helpers + tests Pavel Begunkov
2020-02-24 17:55 ` [PATCH liburing v5 1/2] splice: add splice(2) helpers Pavel Begunkov
2020-02-24 17:55 ` Pavel Begunkov [this message]
2020-02-24 18:23 ` [PATCH liburing v5 2/2] test/splice: add basic splice tests Jens Axboe
2020-02-24 18:26 ` Pavel Begunkov
2020-02-24 18:33 ` Jens Axboe
2020-02-24 18:39 ` Pavel Begunkov
2020-02-24 18:41 ` Jens Axboe
2020-02-24 18:47 ` Pavel Begunkov
2020-02-24 19:30 ` Jens Axboe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aa79d4a192bd1a8e68beddfb177618c1cdacf381.1582566728.git.asml.silence@gmail.com \
[email protected] \
[email protected] \
[email protected] \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox