From: Jens Axboe <[email protected]>
To: io-uring <[email protected]>
Subject: [PATCH] io_uring: make poll->wait dynamically allocated
Date: Tue, 26 Nov 2019 15:00:54 -0700 [thread overview]
Message-ID: <[email protected]> (raw)
In the quest to bring io_kiocb down to 3 cachelines, this one does
the trick. Make the wait_queue_entry for the poll command come out
of kmalloc instead of embedding it in struct io_poll_iocb, as the
latter is the largest member of io_kiocb. Once we trim this down a
bit, we're back at a healthy 192 bytes for struct io_kiocb.
Signed-off-by: Jens Axboe <[email protected]>
---
diff --git a/fs/io_uring.c b/fs/io_uring.c
index e44b0e01f1b5..2c2e8c25da01 100644
--- a/fs/io_uring.c
+++ b/fs/io_uring.c
@@ -291,7 +291,7 @@ struct io_poll_iocb {
__poll_t events;
bool done;
bool canceled;
- struct wait_queue_entry wait;
+ struct wait_queue_entry *wait;
};
struct io_timeout_data {
@@ -2030,8 +2030,8 @@ static void io_poll_remove_one(struct io_kiocb *req)
spin_lock(&poll->head->lock);
WRITE_ONCE(poll->canceled, true);
- if (!list_empty(&poll->wait.entry)) {
- list_del_init(&poll->wait.entry);
+ if (!list_empty(&poll->wait->entry)) {
+ list_del_init(&poll->wait->entry);
io_queue_async_work(req);
}
spin_unlock(&poll->head->lock);
@@ -2104,6 +2104,7 @@ static void io_poll_complete(struct io_kiocb *req, __poll_t mask, int error)
struct io_ring_ctx *ctx = req->ctx;
req->poll.done = true;
+ kfree(req->poll.wait);
if (error)
io_cqring_fill_event(req, error);
else
@@ -2141,7 +2142,7 @@ static void io_poll_complete_work(struct io_wq_work **workptr)
*/
spin_lock_irq(&ctx->completion_lock);
if (!mask && ret != -ECANCELED) {
- add_wait_queue(poll->head, &poll->wait);
+ add_wait_queue(poll->head, poll->wait);
spin_unlock_irq(&ctx->completion_lock);
return;
}
@@ -2161,8 +2162,7 @@ static void io_poll_complete_work(struct io_wq_work **workptr)
static int io_poll_wake(struct wait_queue_entry *wait, unsigned mode, int sync,
void *key)
{
- struct io_poll_iocb *poll = container_of(wait, struct io_poll_iocb,
- wait);
+ struct io_poll_iocb *poll = wait->private;
struct io_kiocb *req = container_of(poll, struct io_kiocb, poll);
struct io_ring_ctx *ctx = req->ctx;
__poll_t mask = key_to_poll(key);
@@ -2172,7 +2172,7 @@ static int io_poll_wake(struct wait_queue_entry *wait, unsigned mode, int sync,
if (mask && !(mask & poll->events))
return 0;
- list_del_init(&poll->wait.entry);
+ list_del_init(&poll->wait->entry);
/*
* Run completion inline if we can. We're using trylock here because
@@ -2213,7 +2213,7 @@ static void io_poll_queue_proc(struct file *file, struct wait_queue_head *head,
pt->error = 0;
pt->req->poll.head = head;
- add_wait_queue(head, &pt->req->poll.wait);
+ add_wait_queue(head, pt->req->poll.wait);
}
static void io_poll_req_insert(struct io_kiocb *req)
@@ -2252,6 +2252,10 @@ static int io_poll_add(struct io_kiocb *req, const struct io_uring_sqe *sqe,
if (!poll->file)
return -EBADF;
+ poll->wait = kmalloc(sizeof(*poll->wait), GFP_KERNEL);
+ if (!poll->wait)
+ return -ENOMEM;
+
req->sqe = NULL;
INIT_IO_WORK(&req->work, io_poll_complete_work);
events = READ_ONCE(sqe->poll_events);
@@ -2268,8 +2272,9 @@ static int io_poll_add(struct io_kiocb *req, const struct io_uring_sqe *sqe,
ipt.error = -EINVAL; /* same as no support for IOCB_CMD_POLL */
/* initialized the list so that we can do list_empty checks */
- INIT_LIST_HEAD(&poll->wait.entry);
- init_waitqueue_func_entry(&poll->wait, io_poll_wake);
+ INIT_LIST_HEAD(&poll->wait->entry);
+ init_waitqueue_func_entry(poll->wait, io_poll_wake);
+ poll->wait->private = poll;
INIT_LIST_HEAD(&req->list);
@@ -2278,14 +2283,14 @@ static int io_poll_add(struct io_kiocb *req, const struct io_uring_sqe *sqe,
spin_lock_irq(&ctx->completion_lock);
if (likely(poll->head)) {
spin_lock(&poll->head->lock);
- if (unlikely(list_empty(&poll->wait.entry))) {
+ if (unlikely(list_empty(&poll->wait->entry))) {
if (ipt.error)
cancel = true;
ipt.error = 0;
mask = 0;
}
if (mask || ipt.error)
- list_del_init(&poll->wait.entry);
+ list_del_init(&poll->wait->entry);
else if (cancel)
WRITE_ONCE(poll->canceled, true);
else if (!poll->done) /* actually waiting for an event */
--
Jens Axboe
reply other threads:[~2019-11-26 22:01 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
[email protected] \
[email protected] \
[email protected] \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox