From: "Paul E. McKenney" <[email protected]>
To: [email protected]
Cc: [email protected], [email protected], [email protected],
Feiyang Chen <[email protected]>,
Huacai Chen <[email protected]>, Willy Tarreau <[email protected]>,
"Paul E . McKenney" <[email protected]>
Subject: [PATCH nolibc 12/14] tools/nolibc: Add support for LoongArch
Date: Mon, 20 Mar 2023 18:11:35 -0700 [thread overview]
Message-ID: <[email protected]> (raw)
In-Reply-To: <6a3206d0-e5cd-4990-9604-444a24a8207c@paulmck-laptop>
From: Feiyang Chen <[email protected]>
Add support for LoongArch (32 and 64 bit) to nolibc.
Signed-off-by: Feiyang Chen <[email protected]>
Acked-by: Huacai Chen <[email protected]>
Signed-off-by: Willy Tarreau <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
---
tools/include/nolibc/arch-loongarch.h | 200 ++++++++++++++++++++++++++
tools/include/nolibc/arch.h | 2 +
2 files changed, 202 insertions(+)
create mode 100644 tools/include/nolibc/arch-loongarch.h
diff --git a/tools/include/nolibc/arch-loongarch.h b/tools/include/nolibc/arch-loongarch.h
new file mode 100644
index 000000000000..029ee3cd6baf
--- /dev/null
+++ b/tools/include/nolibc/arch-loongarch.h
@@ -0,0 +1,200 @@
+/* SPDX-License-Identifier: LGPL-2.1 OR MIT */
+/*
+ * LoongArch specific definitions for NOLIBC
+ * Copyright (C) 2023 Loongson Technology Corporation Limited
+ */
+
+#ifndef _NOLIBC_ARCH_LOONGARCH_H
+#define _NOLIBC_ARCH_LOONGARCH_H
+
+/* Syscalls for LoongArch :
+ * - stack is 16-byte aligned
+ * - syscall number is passed in a7
+ * - arguments are in a0, a1, a2, a3, a4, a5
+ * - the system call is performed by calling "syscall 0"
+ * - syscall return comes in a0
+ * - the arguments are cast to long and assigned into the target
+ * registers which are then simply passed as registers to the asm code,
+ * so that we don't have to experience issues with register constraints.
+ *
+ * On LoongArch, select() is not implemented so we have to use pselect6().
+ */
+#define __ARCH_WANT_SYS_PSELECT6
+
+#define my_syscall0(num) \
+({ \
+ register long _num __asm__ ("a7") = (num); \
+ register long _arg1 __asm__ ("a0"); \
+ \
+ __asm__ volatile ( \
+ "syscall 0\n" \
+ : "=r"(_arg1) \
+ : "r"(_num) \
+ : "memory", "$t0", "$t1", "$t2", "$t3", \
+ "$t4", "$t5", "$t6", "$t7", "$t8" \
+ ); \
+ _arg1; \
+})
+
+#define my_syscall1(num, arg1) \
+({ \
+ register long _num __asm__ ("a7") = (num); \
+ register long _arg1 __asm__ ("a0") = (long)(arg1); \
+ \
+ __asm__ volatile ( \
+ "syscall 0\n" \
+ : "+r"(_arg1) \
+ : "r"(_num) \
+ : "memory", "$t0", "$t1", "$t2", "$t3", \
+ "$t4", "$t5", "$t6", "$t7", "$t8" \
+ ); \
+ _arg1; \
+})
+
+#define my_syscall2(num, arg1, arg2) \
+({ \
+ register long _num __asm__ ("a7") = (num); \
+ register long _arg1 __asm__ ("a0") = (long)(arg1); \
+ register long _arg2 __asm__ ("a1") = (long)(arg2); \
+ \
+ __asm__ volatile ( \
+ "syscall 0\n" \
+ : "+r"(_arg1) \
+ : "r"(_arg2), \
+ "r"(_num) \
+ : "memory", "$t0", "$t1", "$t2", "$t3", \
+ "$t4", "$t5", "$t6", "$t7", "$t8" \
+ ); \
+ _arg1; \
+})
+
+#define my_syscall3(num, arg1, arg2, arg3) \
+({ \
+ register long _num __asm__ ("a7") = (num); \
+ register long _arg1 __asm__ ("a0") = (long)(arg1); \
+ register long _arg2 __asm__ ("a1") = (long)(arg2); \
+ register long _arg3 __asm__ ("a2") = (long)(arg3); \
+ \
+ __asm__ volatile ( \
+ "syscall 0\n" \
+ : "+r"(_arg1) \
+ : "r"(_arg2), "r"(_arg3), \
+ "r"(_num) \
+ : "memory", "$t0", "$t1", "$t2", "$t3", \
+ "$t4", "$t5", "$t6", "$t7", "$t8" \
+ ); \
+ _arg1; \
+})
+
+#define my_syscall4(num, arg1, arg2, arg3, arg4) \
+({ \
+ register long _num __asm__ ("a7") = (num); \
+ register long _arg1 __asm__ ("a0") = (long)(arg1); \
+ register long _arg2 __asm__ ("a1") = (long)(arg2); \
+ register long _arg3 __asm__ ("a2") = (long)(arg3); \
+ register long _arg4 __asm__ ("a3") = (long)(arg4); \
+ \
+ __asm__ volatile ( \
+ "syscall 0\n" \
+ : "+r"(_arg1) \
+ : "r"(_arg2), "r"(_arg3), "r"(_arg4), \
+ "r"(_num) \
+ : "memory", "$t0", "$t1", "$t2", "$t3", \
+ "$t4", "$t5", "$t6", "$t7", "$t8" \
+ ); \
+ _arg1; \
+})
+
+#define my_syscall5(num, arg1, arg2, arg3, arg4, arg5) \
+({ \
+ register long _num __asm__ ("a7") = (num); \
+ register long _arg1 __asm__ ("a0") = (long)(arg1); \
+ register long _arg2 __asm__ ("a1") = (long)(arg2); \
+ register long _arg3 __asm__ ("a2") = (long)(arg3); \
+ register long _arg4 __asm__ ("a3") = (long)(arg4); \
+ register long _arg5 __asm__ ("a4") = (long)(arg5); \
+ \
+ __asm__ volatile ( \
+ "syscall 0\n" \
+ : "+r"(_arg1) \
+ : "r"(_arg2), "r"(_arg3), "r"(_arg4), "r"(_arg5), \
+ "r"(_num) \
+ : "memory", "$t0", "$t1", "$t2", "$t3", \
+ "$t4", "$t5", "$t6", "$t7", "$t8" \
+ ); \
+ _arg1; \
+})
+
+#define my_syscall6(num, arg1, arg2, arg3, arg4, arg5, arg6) \
+({ \
+ register long _num __asm__ ("a7") = (num); \
+ register long _arg1 __asm__ ("a0") = (long)(arg1); \
+ register long _arg2 __asm__ ("a1") = (long)(arg2); \
+ register long _arg3 __asm__ ("a2") = (long)(arg3); \
+ register long _arg4 __asm__ ("a3") = (long)(arg4); \
+ register long _arg5 __asm__ ("a4") = (long)(arg5); \
+ register long _arg6 __asm__ ("a5") = (long)(arg6); \
+ \
+ __asm__ volatile ( \
+ "syscall 0\n" \
+ : "+r"(_arg1) \
+ : "r"(_arg2), "r"(_arg3), "r"(_arg4), "r"(_arg5), "r"(_arg6), \
+ "r"(_num) \
+ : "memory", "$t0", "$t1", "$t2", "$t3", \
+ "$t4", "$t5", "$t6", "$t7", "$t8" \
+ ); \
+ _arg1; \
+})
+
+char **environ __attribute__((weak));
+const unsigned long *_auxv __attribute__((weak));
+
+#if __loongarch_grlen == 32
+#define LONGLOG "2"
+#define SZREG "4"
+#define REG_L "ld.w"
+#define LONG_S "st.w"
+#define LONG_ADD "add.w"
+#define LONG_ADDI "addi.w"
+#define LONG_SLL "slli.w"
+#define LONG_BSTRINS "bstrins.w"
+#else // __loongarch_grlen == 64
+#define LONGLOG "3"
+#define SZREG "8"
+#define REG_L "ld.d"
+#define LONG_S "st.d"
+#define LONG_ADD "add.d"
+#define LONG_ADDI "addi.d"
+#define LONG_SLL "slli.d"
+#define LONG_BSTRINS "bstrins.d"
+#endif
+
+/* startup code */
+void __attribute__((weak,noreturn,optimize("omit-frame-pointer"))) _start(void)
+{
+ __asm__ volatile (
+ REG_L " $a0, $sp, 0\n" // argc (a0) was in the stack
+ LONG_ADDI " $a1, $sp, "SZREG"\n" // argv (a1) = sp + SZREG
+ LONG_SLL " $a2, $a0, "LONGLOG"\n" // envp (a2) = SZREG*argc ...
+ LONG_ADDI " $a2, $a2, "SZREG"\n" // + SZREG (skip null)
+ LONG_ADD " $a2, $a2, $a1\n" // + argv
+
+ "move $a3, $a2\n" // iterate a3 over envp to find auxv (after NULL)
+ "0:\n" // do {
+ REG_L " $a4, $a3, 0\n" // a4 = *a3;
+ LONG_ADDI " $a3, $a3, "SZREG"\n" // a3 += sizeof(void*);
+ "bne $a4, $zero, 0b\n" // } while (a4);
+ "la.pcrel $a4, _auxv\n" // a4 = &_auxv
+ LONG_S " $a3, $a4, 0\n" // store a3 into _auxv
+
+ "la.pcrel $a3, environ\n" // a3 = &environ
+ LONG_S " $a2, $a3, 0\n" // store envp(a2) into environ
+ LONG_BSTRINS " $sp, $zero, 3, 0\n" // sp must be 16-byte aligned
+ "bl main\n" // main() returns the status code, we'll exit with it.
+ "li.w $a7, 93\n" // NR_exit == 93
+ "syscall 0\n"
+ );
+ __builtin_unreachable();
+}
+
+#endif // _NOLIBC_ARCH_LOONGARCH_H
diff --git a/tools/include/nolibc/arch.h b/tools/include/nolibc/arch.h
index 78b067a4fa47..2d5386a8d6aa 100644
--- a/tools/include/nolibc/arch.h
+++ b/tools/include/nolibc/arch.h
@@ -29,6 +29,8 @@
#include "arch-riscv.h"
#elif defined(__s390x__)
#include "arch-s390.h"
+#elif defined(__loongarch__)
+#include "arch-loongarch.h"
#endif
#endif /* _NOLIBC_ARCH_H */
--
2.40.0.rc2
next prev parent reply other threads:[~2023-03-21 1:11 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-21 1:11 [PATCH nolibc 0/14] nolibc updates for v6.4 Paul E. McKenney
2023-03-21 1:11 ` [PATCH nolibc 01/14] tools/nolibc: always disable stack protector for tests Paul E. McKenney
2023-03-21 1:11 ` [PATCH nolibc 02/14] tools/nolibc: Add gitignore to avoid git complaints about sysroot Paul E. McKenney
2023-03-21 1:11 ` [PATCH nolibc 03/14] tools/nolibc: add stdint.h Paul E. McKenney
2023-03-21 1:11 ` [PATCH nolibc 04/14] tools/nolibc: add integer types and integer limit macros Paul E. McKenney
2023-03-21 1:11 ` [PATCH nolibc 05/14] tools/nolibc: enlarge column width of tests Paul E. McKenney
2023-03-21 1:11 ` [PATCH nolibc 06/14] tools/nolibc: add tests for the integer limits in stdint.h Paul E. McKenney
2023-03-21 1:11 ` [PATCH nolibc 07/14] tools/nolibc: add getuid() and geteuid() Paul E. McKenney
2023-03-21 1:11 ` [PATCH nolibc 08/14] selftests/nolibc: skip the chroot_root and link_dir tests when not privileged Paul E. McKenney
2023-03-21 1:11 ` [PATCH nolibc 09/14] tools/nolibc: check for S_I* macros before defining them Paul E. McKenney
2023-03-21 1:11 ` [PATCH nolibc 10/14] tools/nolibc: Include linux/fcntl.h and remove duplicate code Paul E. McKenney
2023-03-21 1:11 ` [PATCH nolibc 11/14] tools/nolibc: Add statx() and make stat() rely on statx() if necessary Paul E. McKenney
2023-03-21 1:11 ` Paul E. McKenney [this message]
2023-03-21 1:11 ` [PATCH nolibc 13/14] selftests/nolibc: Add support for LoongArch Paul E. McKenney
2023-03-21 1:11 ` [PATCH nolibc 14/14] selftests/nolibc: Adjust indentation for Makefile Paul E. McKenney
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
[email protected] \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox